MDS-189-PIN - MACOM - Product.Network

High Level Termination Insensitive Mixer,

1 - 3500 MHz

Rev. V4

MD- / MDS-189

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

Features

 Operates Over Full PCN/PCS/PHS/MSS Bands

 Low Conversion Loss

 Fully Hermetic Package

 Intermodulation Ratio Insensitive to System

Mismatches

 VSWR: <2.0:1 Typical Midband

 Isolation: 35 dB Typical Midband

 High IIP3 (+28 dBm Typical 1-3500 MHz)

Description

M/A-COM’s MD-189 and MDS-189 are high level

termination insensitive mixers. These devices are

packaged in 8-lead flatpack and SMT packages.

These mixers offer consistent and repeatable flat

intermodulation performance and flat conversion

loss with low spurious signal generation independent

of system mismatch from 1 to 3500 MHz. The MD

-189 and MDS-189 are ideally suited for RF/IF com-

munications applications requiring high intercept

point performance.

FP-2 (MD-189)

SF-1 (MDS-189)

Pin Configuration (MD-189)

Pin No. Function Pin No. Function

1 GND 5 LO

2 GND 6 GND

3 GND 7 GND

4 IF 8 RF

Pin Configuration (MDS-189)

Pin No. Function Pin No. Function

1 GND 3 LO

2 IF 4 RF

Absolute Maximum Ratings 1

Parameter Absolute Maximum

Max Input Power2

Total Power

0.5W Derated to 85oC

@ 3.2 mW/oC

LO Power +27 dBm

1. Operation of this device above any one of these parameters

nay cause permanent damage.

2. Ambient Temperature (TA) = +25oC

High Level Termination Insensitive Mixer,

1 - 3500 MHz

Rev. V4

MD- / MDS-189

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

Typical Performance Curves

Electrical Specifications1: TA = -55°C to +85°C

Frequency: RF, LO Ports = 1-3500 MHz, IF Port = 5-1500 MHz

Parameter Test Conditions Frequency Units Min Typ Max

Conversion Loss LO @ 23 dBm

IF @ 60 MHz

5 - 1000 MHz

1000 - 3000 MHz

1 - 3500 MHz

—

6.5

7.5

8.0

7.0

8.5

9.5

Isolation LO to RF 1 - 2000 MHz

2000 - 3500 MHz

—

LO to IF 1 - 2000 MHz

2000 - 3500 MHz

—

RF to IF 10 - 500 MHz

1 - 3500 MHz

—

Input Compression

(1 dB)

LO @ 23 dBm

IF @ 60 MHz

— — — +20 —

IIP3 LO @ 23 dBm

IF @ 60 MHz

— dBm — +28 —

Desensitivity (1dB) LO @ 23 dBm

IF @ 60 MHz

—

dBm

—

+17 —

—

SSB Noise Figure LO @ 23 dBm

IF @ 60 MHz

Within 1 dB of Conversion Loss

Max

— — — — —

Bottom View of SF-1

.506

4X .016 ± .002

6X .050 (+.020/-.000)

4X .099 ± .010

.381

.000

.002

.165

.220

.385 Ref

.000

.002

.080

.143

.205

.305

.367

.430

.510 Ref

High Level Termination Insensitive Mixer,

1 - 3500 MHz

Rev. V4

MD- / MDS-189

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

Typical Performance Curves

Ordering Information

Part Number Package

MD-189 PIN FP-2

MDS-189 PIN SF-1

High Level Termination Insensitive Mixer,

1 - 3500 MHz

Rev. V4

MD- / MDS-189

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM")

products. These materials are provided by MACOM as a service to its customers and may be used for

informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or

in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM

assumes no responsibility for errors or omissions in these materials. MACOM may make changes to

specifications and product descriptions at any time, without notice. MACOM makes no commitment to update

the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future

changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise,

to any intellectual property rights is granted by this document.

THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR

IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR

WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR

INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR

OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY

OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN

THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR

CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS,

WHICH MAY RESULT FROM THE USE OF THESE MATERIALS.

MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM

customers using or selling MACOM products for use in such applications do so at their own risk and agree to

fully indemnify MACOM for any damages resulting from such improper use or sale.

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

MACOM:

MDS-189-PIN MD-189-PIN