Part Number 856020 140 MHz SAW Filter Data Sheet Features * * * * * * * * * For broadband applications Typical 3dB bandwidth of 65 MHz High attenuation Single-ended operation Ceramic Surface Mount Package (SMP) Replaces Sawtek P/N 851948 (BW 3dB=64 MHz) Hermetic RoHS compliant (2002/95/EC), Pb-free Pb Package Pin Configuration Surface Mount 9.00 x 7.01 x 1.50 mm SMP-35B Bottom View 1 2 3 10 4 9 5 0.76 1.50 NOM. 1.65 MAX. 9.00 2.54 8 7 6 1.80 Single-ended Configuration 7.01 Pin No. 4 5 9 10 1,2,3,6,7,8 2.54 1.12 1.02 x 2.54 1.02 Description Output Output return Input Input return Case ground Dimensions shown are nominal in millimeters All tolerances are 0.15mm except overall length and width +0.10mm/-0.15mm Body: Al2O3 ceramic Lid: Kovar, Ni plated Terminations: Au plating 0.5 - 1.0m, over a 2 - 6m Ni plating Subject to change or obsolescence without notice Rev E 11/07 (c) TriQuint Semiconductor Page 1 of 6 Part Number 856020 140 MHz SAW Filter Data Sheet Electrical Specifications (1) Operating Temperature Range: (2) 0 to +70 oC Parameter (3) Minimum Typical (4) Maximum Unit 168.25 171.5 98 - 140 17.8 108.85 170.27 107.45 172.61 102.35 180.78 20 111.75 108.5 182 MHz dB MHz MHz MHz MHz MHz MHz - 0.6 1.0 dB p-p - 5.35 10 deg p-p - 21 0.539 55 - ns p-p sec 45 40 40 45 - 51 50 43 50 50 50 128 LiNbO3 -74 - dB dB dB dB ppm/oC Center Frequency Minimum Insertion Loss Lower 1 dB Bandedge (5) Upper 1 dB Bandedge Lower 3 dB Bandedge (5) Upper 3 dB Bandedge Lower 40 dB Bandedge (5) Upper 40 dB Bandedge Amplitude Variation 111.75 - 168.25 MHz Phase Linearity 111.75 - 168.25 MHz Group Delay Variation 111.75 - 168.25 MHz Absolute Delay Relative Attenuation (5) 15 - 75 MHz 75 - 98 MHz 182 - 205 MHz 205 - 350 MHz Terminating Source Impedance (6) Terminating Load Impedance (6) Substrate Material Temperature Coefficient of Frequency Notes: 1. 2. 3. 4. 5. 6. All specifications are based on the TriQuint test circuit shown below In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature Electrical margin has been built into the design to account for the variations due to temperature and manufacturing tolerances Typical values are based on average measurements at room temperature All attenuation measurements are measured relative to minimum insertion loss This is the optimum impedance in order to achieve the performance shown Test Circuit: Actual matching values may vary due to PCB layout and parasitics 27nH 56nH 9 50 Single-ended Input 50 47pF Subject to change or obsolescence without notice 33nH 4 22pF 1,2,3,5 6,7,8,10 Rev E 11/07 50 (c) TriQuint Semiconductor 50 Single-ended Output Page 2 of 6 Part Number 856020 140 MHz SAW Filter Data Sheet Electrical Specifications (1) Operating Temperature Range: (2) -40 to +85 oC Parameter (3) Minimum Typical (4) Maximum Unit 168.25 171.30 98 - 140 17.8 108.85 170.27 107.45 172.61 102.35 180.78 20 111.75 108.70 182.30 MHz dB MHz MHz MHz MHz MHz MHz - 0.6 1.5 dB p-p - 5.35 10 deg p-p - 21 0.539 70 - ns p-p sec 45 40 39 45 - 51 50 43 50 50 50 128 LiNbO3 -74 - dB dB dB dB ppm/oC Center Frequency Minimum Insertion Loss Lower 1.5 dB Bandedge (5) Upper 1.5 dB Bandedge Lower 3 dB Bandedge (5) Upper 3 dB Bandedge Lower 40 dB Bandedge (5) Upper 40 dB Bandedge Amplitude Variation 111.75 - 168.25 MHz Phase Linearity 111.75 - 168.25 MHz Group Delay Variation 111.75 - 168.25 MHz Absolute Delay Relative Attenuation (5) 15 - 75 MHz 75 - 98 MHz 182 - 205 MHz 205 - 350 MHz Terminating Source Impedance (6) Terminating Load Impedance (6) Substrate Material Temperature Coefficient of Frequency Notes: 1. 2. 3. 4. 5. 6. All specifications are based on the TriQuint test circuit shown below In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature Electrical margin has been built into the design to account for the variations due to temperature and manufacturing tolerances Typical values are based on average measurements at room temperature All attenuation measurements are measured relative to minimum insertion loss This is the optimum impedance in order to achieve the performance shown Test Circuit: Actual matching values may vary due to PCB layout and parasitics 27nH 56nH 9 50 Single-ended Input 50 47pF Subject to change or obsolescence without notice 33nH 4 22pF 1,2,3,5 6,7,8,10 Rev E 11/07 50 (c) TriQuint Semiconductor 50 Single-ended Output Page 3 of 6 Part Number 856020 140 MHz SAW Filter Data Sheet Typical Performance (at room temperature) Subject to change or obsolescence without notice Rev E 11/07 (c) TriQuint Semiconductor Page 4 of 6 Part Number 856020 140 MHz SAW Filter Data Sheet Matching Schematics Actual matching values may vary due to PCB layout and parasitics 27nH 56nH 9 50 Single-ended Input 50 47pF 33nH 4 22pF 1,2,3,5 6,7,8,10 Marking 50 Single-ended Output 50 PCB Footprint 9.19 1.32 SAWTEK 856020 XXXXXX ID dot 1.22 Date code 3.76 7.21 The date code consists of: day of the current year (Julian, 3 digits), last digit of the year (1 digit) and hour (2 digits) 1.32 1.22 2.07 1.32 This footprint represents a recommendation only Dimensions shown are nominal in millimeters Tape and Reel ID dot 16.8 2.7 O330 0.3 4.0 2.0 O1.5 A 7.5 16.0 9.22 O102 O20.2 O13.0 2.0 Direction of travel 2.2 Section A-A 1.75 7.22 12.0 O1.5 A Dimensions shown are nominal in millimeters Packaging quantity: 2000 units/reel Subject to change or obsolescence without notice Rev E 11/07 (c) TriQuint Semiconductor Page 5 of 6 Part Number 856020 140 MHz SAW Filter Data Sheet Maximum Ratings Parameter Operating Temperature Range Storage Temperature Range Symbol Minimum Maximum T Tstg -40 -40 +85 +85 Unit o C C o Important Notes Warnings * * Electrostatic Sensitive Device (ESD) Avoid ultrasonic exposure RoHS Compliance * This product complies with EU directive 2002/95/EC (RoHS) Pb Solderability * Compatible with JESD22-B102, Pb-free process, 260C peak reflow temperature (see soldering profile) Links to Additional Technical Information PCB Layout Tips Qualification Flowchart S-Parameters RoHS Information Soldering Profile Other Technical Information TriQuint's liability is limited only to the Surface Acoustic Wave (SAW) component(s) described in this data sheet. TriQuint does not accept any liability for applications, processes, circuits or assemblies, which are implemented using any TriQuint component described in this data sheet. Contact Information PO Box 609501 Orlando, FL 32860-9501 USA Subject to change or obsolescence without notice Phone: +1 (407) 886-8860 Fax: +1 (407) 886-7061 Email: info-product@tqs.com Web: www.triquint.com Rev E 11/07 Or contact one of our worldwide Network of sales offices, Representatives or distributors (c) TriQuint Semiconductor Page 6 of 6