The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. NEW Standard Connectors MD Series Overview Connectors conforming to the requirements of the High Definition Multimedia Interface (HDMI) Standard intended for the digital television. The HDMI places the video and audio links into a single connector /cable. Features 1.6 mm offset from the mating surface 1. Two panel mounting styles (receptacle) SMT termination, through panel (no screw) SMT termination, through panel, single screw panel attachment 2. Easy insertion Mating interface is visible on the panel surface, allowing correct insertion of the plug. (Figures (1) and (2)) 3. Reliable connection Fully mated condition between the plug and receptacle is confirmed with a distinctive tactile "click" sensation, assuring complete mechanical and electrical connection. 4. Small size Despite it's small size, solder connection of the wires to the terminations is easily performed. 5. Strong shields Two-piece shields surrounding the wire termination areas provide EMI protection as well as increase the strength of the plug. (Figure (3)) 1.6mm Figure (1) Easy insertion - connector flush with the panel 6. RoHS compliant All components and materials comply with the requirements of EU Directive 2002/95/EC Panel Panel mounting screw Receptacle Plug Applications PDP, LCD, CRT televisions, projectors, DVD, set top boxes and other audiovisual peripheral equipment. PCB Mating surface Figure (2) Strong shields-plug HDMI connections Shell - top Assembly (insulator/ contacts) Figure (3) Shell - bottom *High Definition Multimedia Interface and HDMI are trademarks of HDMI Licensing, LLC. 2008.3 1 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will beConnectors discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. MD SeriesHDMITM Standard Specifications Current rating 0.5A Voltage rating 125V AC Operating temperature range : -55C to +85C Ratings Item 1. Contact resistance Specification Conditions Signal: 60 mo max. Shell: 30 mo max. 100mA (DC or 1,000Hz) 2. Insulation resistance 100 Mo min. 500V DC 3. Withstanding voltage No flashover or insulation breakdown 500 V AC / 1 minute 4. Durability 5. Vibration 6. Shock 7. Temperature cycle 8. Salt spray Contact resistance of contacts: Change of 30mo max. Contact resistance of shell: Change of 50mo max. 10,000 cycles Frequency: 55 to 2,000 Hz, total amplitude of 1.5 mm Acceleration of 147 m/s2, 12 test cycles in each of the 3 directions No electrical discontinuity of 1 s or longer. Contact resistance, contacts: Change of 30 mo max. Contact resistance, shell: Change of 50 mo max. No damage, cracks, or parts dislocation Acceleration of 490m/s2, 11 ms continuous time, sine half-wave, 3 test cycles in each of the 3 directions Contact resistance, contacts: Change of 30 mo max. Contact resistance, shell: Change of 50 mo max. No damage, cracks, or parts dislocation Temperature:-55c/+15c to 35c/+85c/+15c to 35c Times: 30 min./ 2 min.to 3 min. / 30 min./ 2 min. to 3 min 10 cycles No corrosion 5% salt water solution / 48 hours Materials / Finishes Receptacles Part Material Finish Remarks Insulator LCP ------- UL94V-0 Contacts Copper alloy Contact area: Gold plating over nickel Lead area: Gold flash plating over nickel ------- Shell Copper alloy Tin plating over nickel ------- ------- Plugs 2 Part Material Finish Remarks Insulator LCP ------- UL94V-0 Contacts Copper alloy Contact area: Gold plating over nickel Lead area: Gold flash plating over nickel ------- Shell Copper alloy Tin plating over nickel ------- ------- The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. MD SeriesHDMITM Standard Connectors Ordering information Receptacles Receptacles MD 60 - 19 P A 1 2 3 4 5 : MD 1 Series name 2 Board mounting style: 60 3 Number of Contacts 4 Contact type P :Right angle SMT :19 : Male 5 Panel mounting style Blank A Plugs Plugs MD 40 - 19 S 1 :Standard :Single panel screw 2 3 4 1 Series name 2 Termination style 40 3 Number of Contacts 4 Contact type S : MD : Solder :19 :Female Note: Plug cable termination and overmold recommendations are available upon request. Contact your Hirose sales representative for details. *Information contained in this catalog may not reflect latest updates. Request drawing for a specific part number listed. 3 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales represent MD SeriesHDMITM Standard Connectors Receptacles 17.6 Receptacles - Right angle 9 P=0.5 (0.18) No.1 1.4 1.4 No.19 17.2 No.19 243-0001-8 YES 6.15 No.18 8.1 1 Note 1: Tape and reel packaging (750 pieces/reel). Order by number of reels. 9 2 PCB edge 8.1 1.3 3.375 0.35 0.05 Solder pad 2 0.5 1.7 1.9 M 1.1 10.6 13 (3.1) BRecommended PCB mounting pattern 4.5 6.15 8 -R 5 0. AX 2-O PCB mounting surface (5.6) All dimensions: mm BRecommended Panel Cutout 15.6 3.7 2.4 No.2 0.9 MD60-19P 10.8 5.6 RoHS 3.7 2.4 CL No. No.1 A (3.375) Part Number 15 13.4 18.2 Panel thickness: 1.6 mm max. Receptacles - Single panel screw All dimensions: mm 17.6 9 No.19 No.1 P=0.5 1.4 1.4 (0.18) 10.8 17.2 1.6 CL No. RoHS MD60-19PA 243-0003-3 YES Tray packaging 7.9 No.19 No.1 6 15 6.15 Part Number 9.8 (3.375) (6.425) Note.1 A No.18 O1 No.2 3.7 2.4 0.9 8.1 (5.6) (3.1) Note 1: Use M3x12mm long pan head self-taping screw. (3.375) 13 0.35 0.05 Solder pad 5.6 2 3.7 2.4 2 0.5 8.1 10.6 1.3 PCB mounting surface 8 .5 4.5 6.15 15.6 0 -R 9 AX 1.7 1.9 6 O3. M BRecommended PCB mounting pattern 1.1 2-O 9.8 6.425 BRecommended Panel Cutout PCB edge 13.4 18.2 Panel thickness: 1.6 mm max. All dimensions: mm 4 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales represent MD SeriesHDMITM Standard Connectors Plug Assembly (insulator / contacts) 13.45 3.5 4.5 Shell - bottom Assembly (insulator/contacts) Shell - top 13.2 No.19 Part Number CL No. RoHS MD40-19S CL243-0002-0 YES 3.8 0.8 No.1 No.2 No.18 All dimensions: mm * Supplied separate as shown. Shell - top Shell- bottom Note: Plug cable termination and overmold recommendations are available upon request. Contact your Hirose sales representative for details. 5 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will beConnectors discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. MD SeriesHDMITM Standard Packaging Specifications Embossed carrier tape dimensions Reel Dimensions (2) (32.4) (O380) 320.3 Unreeling direction 160.1 Unreeling direction Temperature(c) Recommended Temperature Profile PEAK: 250c 230c 250 200 150 180c 150c 100 50 12030s Preheating 2010s Soldering Time(Seconds) Note 1: Up to 2 cycles of Reflow soldering are possible under the same conditions, provided that there is a return to normal temperature between the first and second cycle. Note 2: The temperature profile indicates the board surface temperature at the point of contacts with the connector terminals. (R) 6 5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933 http://www.hirose.com http://www.hirose-connectors.com The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of improvements.