Mating surface
Panel
PCB
Plug
Panel mounting screw
Receptacle
1
Standard Connectors
MD Series
2008.3
■Features
1. Two panel mounting styles (receptacle)
¡SMT termination, through panel (no screw)
¡SMT termination, through panel, single screw panel attachment
2. Easy insertion
Mating interface is visible on the panel surface, allowing correct insertion
of the plug. (Figures (1) and (2))
3. Reliable connection
Fully mated condition between the plug and receptacle is confirmed with a
distinctive tactile “click” sensation, assuring complete mechanical and
electrical connection.
4. Small size
Despite it’s small size, solder connection of the wires to the terminations is
easily performed.
5. Strong shields
Two-piece shields surrounding the wire termination areas provide EMI
protection as well as increase the strength of the plug. (Figure (3))
6. RoHS compliant
All components and materials comply with the requirements of EU
Directive 2002/95/EC
■Applications
PDP, LCD, CRT televisions, projectors, DVD, set top boxes and other audio-
visual peripheral equipment.
■Overview
Connectors conforming to the requirements of the High
Definition Multimedia Interface (HDMI) Standard intended for
the digital television.
The HDMI places the video and audio links into a single
connector /cable.
NEW
1.6 mm offset from the mating surface
Figure (1)
Figure (2)
1.6mm
Assembly
(insulator/ contacts)
Shell - bottom
Shell – top
Strong shields-plug
Figure (3)
Easy insertion - connector flush with the panel
*High Definition Multimedia Interface and HDMI are trademarks of HDMI Licensing, LLC.
HDMI
connections
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
2
MD Series●HDMI™ Standard Connectors
●Receptacles
■Specifications
Ratings 0.5A
125V AC
Current rating
Voltage rating Operating temperature range : -55°C to +85°C
■Materials / Finishes
Insulator LCP ------- UL94V-0
Contacts Copper alloy Contact area: Gold plating over nickel -------
Lead area: Gold flash plating over nickel -------
Shell Copper alloy Tin plating over nickel -------
Part Material Finish Remarks
Item Specification Conditions
1. Contact resistance 100mA (DC or 1,000Hz)
2. Insulation resistance 100 Mø min. 500V DC
3. Withstanding voltage No flashover or insulation breakdown 500 V AC / 1 minute
4. Durability 10,000 cycles
5. Vibration
6. Shock
7. Temperature cycle
8. Salt spray No corrosion 5% salt water solution / 48 hours
Acceleration of 490m/s
2
, 11 ms continuous time, sine
half-wave, 3 test cycles in each of the 3 directions
Frequency: 55 to 2,000 Hz, total amplitude of 1.5 mm
Acceleration of 147 m/s
2
, 12 test cycles in each of the 3 directions
Signal: 60 mømax.
Shell: 30 mømax.
Contact resistance of contacts: Change of 30mømax.
Contact resistance of shell: Change of 50mømax.
No electrical discontinuity of 1 µs or longer.
Contact resistance, contacts: Change of 30 mømax.
Contact resistance, shell: Change of 50 mømax.
No damage, cracks, or parts dislocation
Contact resistance, contacts: Change of 30 mømax.
Contact resistance, shell: Change of 50 mømax.
No damage, cracks, or parts dislocation
Temperature:-55ç/+15çto 35ç/+85ç/+15çto 35ç
Times: 30 min./2 min.to 3 min. /30 min./2 min. to 3 min
10 cycles
●Plugs
Insulator LCP ------- UL94V-0
Contacts Copper alloy Contact area: Gold plating over nickel -------
Lead area: Gold flash plating over nickel -------
Shell Copper alloy Tin plating over nickel -------
Part Material Finish Remarks
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
3
MD Series●HDMI™ Standard Connectors
■Ordering information
Series name : MD
Board mounting style:
60 :Right angle SMT
Number of Contacts :19
Contact type
P : Male
Panel mounting style
Blank :Standard
A :Single panel screw
1
2
3
4
5
-AP1960MD
1 2 3 4 5
●Receptacles
-S1940MD
1 2 3 4
●Plugs
Series name : MD
Termination style
40 : Solder
Number of Contacts :19
Contact type
S :Female
1
2
3
4
Note: Plug cable termination and overmold recommendations are available upon request.
Contact your Hirose sales representative for details.
*Information contained in this catalog may not reflect latest updates.
Request drawing for a specific part number listed.
Receptacles
Plugs
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
MD Series●HDMI™ Standard Connectors
4
■Receptacles
●Receptacles – Right angle
Part Number CL No. RoHS
MD60-19P 243-0001-8 YES
●Receptacles – Single panel screw
Part Number CL No. RoHS
MD60-19PA 243-0003-3 YES
BRecommended Panel Cutout
BRecommended Panel Cutout
5.6
PCB edge
2
2-Ø1.1
8.1
13.4
18.2
0.5
90.35 ± 0.05 Solder pad
2.4
3.7
2
1.7 1.9
BRecommended PCB mounting pattern
5.6
PCB edge
2
2-Ø1.1
8.1
13.4
18.2
0.5
90.35 ± 0.05 Solder pad
2.4
3.7
2
1.7 1.9
BRecommended PCB mounting pattern
Note 1: Tape and reel packaging (750 pieces/reel).
Order by number of reels. All dimensions: mm
All dimensions: mmPanel thickness: 1.6 mm max.
All dimensions: mmPanel thickness: 1.6 mm max.
Tray packaging
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
5
MD Series●HDMI™ Standard Connectors
■Plug
Part Number CL No. RoHS
MD40-19S
* Supplied separate as shown.
Note: Plug cable termination and overmold recommendations are available upon request.
Contact your Hirose sales representative for details.
CL243-0002-0 YES
Shell - bottom
Shell - top
Assembly
(insulator/contacts)
Assembly (insulator / contacts)
Shell - top Shell- bottom
All dimensions: mm
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
6
MD Series●HDMI™ Standard Connectors
■Packaging Specifications
■Recommended Temperature Profile
Unreeling direction
16±0.1
(32.4)(2)
Unreeling direction
32±0.3
(Ø380)
120±30s
20±10s
Time(Seconds)
Temperature(ç)
Preheating
PEAK: 250ç
230ç
Soldering
250
200
150 150ç
180ç
100
50
Note 1: Up to 2 cycles of Reflow soldering are possible under the same conditions, provided that there
is a return to normal temperature between the first and second cycle.
Note 2: The temperature profile indicates the board surface temperature at the point of contacts with the
connector terminals.
●Embossed carrier tape dimensions ●Reel Dimensions
The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of improvements.
5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN
PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933
http://www.hirose.com
http://www.hirose-connectors.com
®
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.