Han
®
24 HPR enlarged
Ha-VIS LOCFIELD
®
New thinking – design your RFID reading field
Ha-VIS LOCFIELD
®
Traveling wave RFID antenna
Identification
Ha-VIS LOCFIELD
®
2 m (active length), total length
2,5 m, diameter 3 mm, SMA (m),
EU
2 m (active length), total length
3 m, low loss coax, diameter 5
mm, SMA (m), EU
1 m (active length), total length
1,5 m, diameter 3 mm, SMA (m),
EU
0,3 m (active length), total length
0.6 m, diameter 3 mm, SMA (m),
EU
Part number Idea
2 m (active length), total length
3 m, low loss coax, diameter 5
mm, SMA (m), FCC
1 m (active length), total length
1,5 m, diameter 3 mm, SMA (m),
FCC
0,3 m (active length), total length
0.6 m, diameter 3 mm, SMA (m),
FCC
All data represent the current state of development at the time of print and are therefore non-binding.
HARTING reserves the right to modify designs without prior notice.
2093 610 110010
2093 610 210010
2093 610 110020
2093 610 110030
2093 610 220010
2093 610 120020
2093 610 120030
The Ha-VIS LOCFIELD
®
changes everything. Instead
of installing patch antennas, the coax antenna cable
itself becomes the antenna. The read range can be
varied from a few centimeters to about 2 m just by
changing the power of the RFID reader. The
LOCFIELD
®
antenna can easily be installed in any
shape which serves the project in the best possible
way.
Applications:
- Tool identification in machines
- Door and window pass-throughs
- Wireless sensor networks
- Smart shelf
Ha-VIS LOCFIELD
®
Technical characteristics
General characteristics
Read range from a few cm up to 2 m
(strongly depending on reader, configured power and tags)
Optimized for Identification of tools in machines
Door openings and pass throughs
Wireless sensor networks
Smart shelf / smart work bench
Electric properties
Frequency range EU: 865 ... 868 MHz; FCC: 902 …928 MHz
Impedance 50 Ohm
VSWR < 1.8:1
Polarisation Linear (tags are read in any orientation)
Gain approx. -7 dBi
Opening angle / read angle 360°
Max. power 2 W (applied to antenna)
Connection SMA male
TNC-rev (on request)
Mechanical properties
Length see first page
Degree of protection IP 65
Installation Can be mounted directly on any non-conducting surface. On conducting
surfaces a distance of at least 2 cm is recommended
Operating temperature range –20 °C ... +65 °C
Storage temperature range –40 °C ... +85 °C
HARTING Software Development GmbH & Co. KG
Marienwerder Str. 2 | D-32339 Espelkamp | P.O.Box 14 73 | D-32328 Espelkamp
2014-06-25
Phone: +49 5772 47-0 | auto-ID@HARTING.com | www.HARTING-RFID.com
