DO NOT
SCALE FROM
THIS PRINT
.275 6.99
REF
({(No OF POS +2) x .03937 [1.00]}
+ .100 [2.54])
.050 1.27
(No OF POS +2) x
.03937 [1.00] REF
.026
REF
0.66
.072
REF
1.83
.109 2.77
REF
1.5°
MAX SWAY
(ANY DIRECTION)
(No OF POS -1) x .03937 [1.00]
MEC1-XX-X-D-X-X
02
01
15
39
40
.007[.18]
.005[.13]
C
FIG 1
16
FLOW INHIBITORS
AT VENDOR DISCRETION
C
.350 8.89
REF
"A"
"A"
SEE NOTE 5
C-113-02-XX
.320 8.13
REF
.030 0.75
.160
REF
4.07
.006
REF
0.15
.020
-
.010
+
.005 0.51
-
0.25
+
0.13
SEE NOTE 2
SECTION "A"-"A"
C
MEC1-1XX-XX-XX-D-XX-XX
05, 08, 10, 20, 30, 40 , 50, 60 & 70
(PER ROW, SEE TABLE 2)
No OF POSITIONS
CARD THICKNESS
-02: .062 [1.58] THICK CARD
(USE MEC1-XX-S-D-X-X)
PLATING SPECIFICATION
-F: 3µ" FLASH GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-L: 10µ" LIGHT GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-S: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
-FM: 3µ" FLASH GOLD IN CONATACT AREA,
MATTE ON TIN TAIL
-LM: 10µ" LIGHT IN CONTACT AREA,
MATTE TIN ON TAIL
-SM: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
ROW SPECIFICATION
-D: DOUBLE ROW
(USE MEC1-XX-X-D-X-X)
POLARIZED OPTION (SEE TABLE 2)
-BLANK: BODY IS POLARIZED
-NP: NO POLARIZATION (-05 THRU -30 ONLY)
(USE MEC1-XX-X-D-N-X)
OTHER OPTIONS
-LC: LOCKING CLIP (SEE NOTE 8)
(SEE FIG 2)(USE LC-05-TM)
-A: ALIGNMENT PIN
(MOLDED, SEE FIG 4, SHT 2)
(USE MEC1-XX-X-D-X-A)
-K: POLYIMIDE FILM PAD
(SEE FIG 6, SHT 2)(USE K-DOT-.310-.406-.005)
-TR: TAPE & REEL PACKAGING
(N/A IN 70 POSITION)(SEE FIG 5, SHT 2)
.079 2.00
MEC1-XX-X-D-N-X
02
01
39
40
-NP: NON-POLARIZED OPTION
(AVAILABLE ON -05, -08, -10, -20 & -30 POS. ONLY)
(SHOWN: MEC1-120-02-X-D-NP)
PACKAGING VIEW
TUBE: PT-1-24-01-69
PLUG: TP-07
.334 8.49
.356
-
.002
+
.004 9.04
-
0.05
+
0.10
90°
±3°
C
.535
-
.000
+
.005 13.59 0.00
+
0.13
IN-PROCESS
(FILL STEP)
C
C
C
TUBE: PT-1-24-01-70
PLUG: TP-29
FOR -K OPTION
NO -K OPTION
MEC1-120-02-X-D SHOWN
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS ANGLES
.XX:
.01 [.3] 2
.XXX:
.005 [.13]
.XXXX:
.0015 [.038]
MATERIAL:
1mm MINI-EDGE CARD ASSEMBLY
BY:
MEC1-1XX-XX-XX-D-XX-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
KEVIN B
5/11/2000
2
1
SHEET SCALE: 1.5:1
INSULATOR:
VECTRA E130i COLOR: BLACK
CONTACT:
BeCu 190 HM
F:\DWG\MISC\MKTG\MEC1-1XX-XX-XX-D-XX-XX-MKT.SLDDRW
NOTES:
1. MINIMUM PUSHOUT FORCE: 10 oz.
2. COPLANARITY: POS -05 THRU -26: .004 [.10]
POS -27 THRU -70: .006 [.15]
3. REPRESENTS A CRITICAL DIMENSION.
4. PACKAGE ALL POSITIONS IN TUBES.
(WITH -K OPTION, USE PT-1-24-01-70 TUBE & TP-29 TUBE PLUG)
(WITHOUT -K OPTION, USE PT-1-24-01-69 TUBE & TP-07 TUBE PLUG)
5. MAXIMUM CUT FLASH: .010; FLASH NOT TO EXTEND BELOW LEADS.
6. MAXIMUM ALLOWABLE BOW: .002 INCH/INCH AFTER ASSEMBLY.
7. MAXIMUM BURR: .003[.08], BURR DIRECTION TO BE OPPOSITE OF SOLDER PAD AREA
8. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE –LC OPTION IS NOT
COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS MANUAL PLACEMENT
FOR ALL ASSEMBLIES WITH THE –LC OPTION.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
REVISION AJ
.035
REF
0.89
(TYP)
({(No OF POS +2) x .03937[1.0000]}
+ .0490[1.245]) REF
MEC1-XX-X-D-X-A
FIG 4
-A: ALIGNMENT PIN OPTION (MOLDED)
(SHOWN: MEC1-120-02-X-D-A)
.0625
REF
1.59
.055
REF
1.40
"M"
.310 7.87
"P"
NOTE: "M" = USED MEASURED DIMENSION (REF)
"P" = {("M" - .310 [7.87]) / 2}
.020 [.51]
FIG 6
-K: POLYIMIDE FILM PAD OPTION
(SHOWN: MEC1-120-02-X-D-K)
01
15
39
02
16
40
.361 9.17
POSITION 1
FIG 5
-TR: TAPE & REEL PACKAGING VIEW
(NOT DRAWN TO SCALE)
USER DIRECTION OF UNREELING
C
.376
REF
9.55
.010
REF
0.25
({(No OF POS +2) x .03937[1.00]}
+ .0490[1.245])
.005[.13]
2
MAX SWAY
(EITHER DIRECTION)
-LC OPTION
(SHOWN: MEC1-120-02-X-D-LC)
FIG 2
C
.059
(TYP)
1.50
.056
REF (TYP)
1.42
LC-05-TM
.0625
REF
1.588
SHEET OF
1mm MINI-EDGE CARD ASSEMBLY
BY:
MEC1-1XX-XX-XX-D-XX-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
KEVIN B
5/11/2000
2
2
SHEET SCALE: 1.5:1
REVISION AJ
F:\DWG\MISC\MKTG\MEC1-1XX-XX-XX-D-XX-XX-MKT.SLDDRW
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail: info@SAMTEC.com code: 55322
