3.0mmx1.0mm RIGHT ANGLE SMD CHIP LED LAMP Part Number: APBA3010SURKCGKC-GX Hyper Red Green Features Description z 3.0mmx1.0mm right angle SMT LED, 2.0mm thickness. The Hyper Red source color devices are made with Al- z Low power consumption. GaInP on GaAs substrate Light Emitting Diode. z Wide viewing angle. The Green source color devices are made with AlGaInP on z Ideal for backlight and indicator. GaAs substrate Light Emitting Diode. z Various colors and lens types available. z Package : 2000pcs / reel. z Moisture sensitivity level : level 3. z Tinned pads for improved solderability. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.15(0.006") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAL3682 REV NO: V.3 DATE: JUL/26/2011 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.Han ERP: 1203000840 Selection Guide Part No. Dice APBA3010SURKCGKC-GX Lens Type Hyper Red (AlGaInP) Water Clear Green (AlGaInP) Viewing Angle [1] Iv (mcd) [2] @ 20mA Min. Typ. 120 300 40 70 21/2 140 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Hyper Red Green D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 650 574 nm IF=20mA Hyper Red Green 630 570 nm IF=20mA Spectral Line Half-width Hyper Red Green 28 20 nm IF=20mA C Capacitance Hyper Red Green 35 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Hyper Red Green 1.95 2.1 2.5 2.5 V IF=20mA IR Reverse Current Hyper Red Green 10 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter Hyper Red Green Units Power dissipation 75 75 mW DC Forward Current 30 30 mA Peak Forward Current [1] 185 150 mA Reverse Voltage 5 Operating Temperature -40C To +85C Storage Temperature -40C To +85C V Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAL3682 REV NO: V.3 DATE: JUL/26/2011 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.Han ERP: 1203000840 APBA3010SURKCGKC-GX Hyper Red SPEC NO: DSAL3682 REV NO: V.3 DATE: JUL/26/2011 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.Han ERP: 1203000840 Green SPEC NO: DSAL3682 REV NO: V.3 DATE: JUL/26/2011 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.Han ERP: 1203000840 APBA3010SURKCGKC-GX Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) Reel Dimension Tape Dimensions (Units : mm) SPEC NO: DSAL3682 REV NO: V.3 DATE: JUL/26/2011 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.Han ERP: 1203000840 PACKING & LABEL SPECIFICATIONS APBA3010SURKCGKC-GX SPEC NO: DSAL3682 REV NO: V.3 DATE: JUL/26/2011 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.Han ERP: 1203000840