Series 265 Card Lok
nVent.com/SCHROFF 1-800-854-7086
SERIES 265 CARD LOK
RECOMMENDED GAP WIDTH
PCB + 6.35 mm (.250 in)
RECOMMENDED TORQUE
68 N-cm (6 in-lbs)
With “L” option 90 N-cm (8 in-lbs)
WEIGHT
.89 g/cm (.080 oz/in)
MATERIALS AND FINISH
SHAFT
Material: Alluminum alloy 7075-T6 per
ASTMB221 or AMS-QQ-A-200/8
Finish: See nish table on opposite page
BODIES AND WEDGES
Material: Aluminum Alloy 6061-T6 per
ASTM-B221 or AMS-QQ-A-200/8
Finish: See nish table on opposite page
SCREW
.09-in. or 2.5-mm hex. socket head cap screw,
depending on mounting conguration
Material: NAS1352C, Modied NAS1352C04
or 300 series stainless steel, stainless steel per
ASTM-A582
Finish: Passivated per AMS2700
LOCK AND FLAT WASHER
Material: 300 series stainless steel
Finish: Passivated per AMS2700
ROLLPIN
Material: 400 series stainless steel
Finish: Passivated per AMS2700
Recommended Gap:
Board Module
Assembly thickness
plus 6.35 (.250)
Board Module
Assembly
Wedges
Roll
Pin
Screw
Lockwasher
Square Flatwasher
Cold
Plate
89067667
Shaft may be riveted
or screwed to the
Board Module
Assembly
SERIES 265 CARD LOK
nVent may modify standard parts without prior notice to or approval from customers. These modications may change product appearance, but will not have a
detrimental effect on form, t or function. ©2018 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its aliates. All other trademarks
are the property of their respective owners. nVent reserves the right to change specications without notice.
2.38 (.094) Hex Socket Cap Per ANSI/
ASME B18.3
M2
± .13 (.005)
5.84 (.230) max.
4.6 (.18) REF
5.72
(.225)
M = Assembly Length minus
48.26 (1.90)
± .13 (.005)
20.32 (.800)
Assembly Length ± 1.3 (.050)
7.6 (.30) max.
Two holes standard. Extra hole
added with “E” option.
Center hole location
“E” option only
Units: mm (in.)
.xx ± .25, .x ±.5
(.xxx ± .010, .xx ± .02)
Note: Each piece has a tolerance of ± .010
Lock element per
MIL-F-18240
applied to thread of screw
slotted shaft
cut away view of front wedge
relieved screw
etail Prevents the
unintenonal disassembly
etail
Provides prevailing torque for resistance to
loosening from shock and vibraon. Adds
22 N-cm (2 in-lbs) torque to assembly.
Part Number Code 5 -
M
_[Blank]
[Blank]
H
Finish
A
choose from
Length
(.50)
Type
TLC
V
[Blank]
Mounng
E
[Blank]
Lock Patch
L
[Blank]
Part Number Code Example:
hard
hole mounng
CODE
LETTER SURFACE FINISH
CODE
LETTER METHOD
MOUNTING METHOD TABLE
e l
11.1
(.44)
7.6
(.30)
Locked
4.65 (.183)
5.72 (.225)
Unlocked
:
THE MINIMUM LENGTH IS 96.52 (3.80)
THE FRONT MOUNTING HOLE, NEAREST TO THE SCREW,
WILL BE REPLACED WITH AN INDEXING PIN
VISUAL INDICATOR OPTION NOT AVAILABLE
MUST CLICK 3+ TIMES FOR PROPER INSTALLATION
