Series 265 Card Lok SERIES 265 CARD LOK RECOMMENDED GAP WIDTH PCB + 6.35 mm (.250 in) 06 76 Cold Plate 89 68 N-cm (6 in-lbs) With "L" option 90 N-cm (8 in-lbs) 67 RECOMMENDED TORQUE WEIGHT .89 g/cm (.080 oz/in) MATERIALS AND FINISH SHAFT Material: Alluminum alloy 7075-T6 per ASTMB221 or AMS-QQ-A-200/8 Finish: See finish table on opposite page BODIES AND WEDGES Material: Aluminum Alloy 6061-T6 per ASTM-B221 or AMS-QQ-A-200/8 Finish: See finish table on opposite page Recommended Gap: Board Module Assembly thickness plus 6.35 (.250) Roll Pin Board Module Assembly Shaft may be riveted or screwed to the Board Module Assembly SCREW .09-in. or 2.5-mm hex. socket head cap screw, depending on mounting configuration Material: NAS1352C, Modified NAS1352C04 or 300 series stainless steel, stainless steel per ASTM-A582 Finish: Passivated per AMS2700 Wedges LOCK AND FLAT WASHER Material: 300 series stainless steel Finish: Passivated per AMS2700 ROLLPIN Material: 400 series stainless steel Finish: Passivated per AMS2700 Square Flatwasher Lockwasher Screw nVent.com/SCHROFF1-800-854-7086 SERIES 265 CARD LOK 7.6 (.30) 11.1 (.44) 4.65 (.183) Lock element per MIL-F-18240 applied to thread of screw 5.72 (.225) Locked Unlocked e slotted shaft cut away view of front wedge relieved screw etail l Provides prevailing torque for resistance to loosening from shock and vibration. Adds 22 N-cm (2 in-lbs) torque to assembly. 2.38 (.094) Hex Socket Cap Per ANSI/ ASME B18.3 etail Prevents the unintentional disassembly Center hole location "E" option only M2 .13 (.005) 5.84 (.230) max. 5.72 (.225) M = Assembly Length minus 48.26 (1.90) .13 (.005) 4.6 (.18) REF 20.32 (.800) Assembly Length 1.3 (.050) 7.6 (.30) max. Two holes standard. Extra hole added with "E" option. Units: mm (in.) .xx .25, .x .5 (.xxx .010, .xx .02) Note: Each piece has a tolerance of .010 Part Number Code Example: 5 - Part Number Code hard M _[Blank] Type TLC V [Blank] Finish choose from Length Mounting hole mounting CODE LETTER SURFACE FINISH A (.50) CODE LETTER MOUNTING METHOD TABLE METHOD E [Blank] H Lock Patch L [Blank] [Blank] : THE MINIMUM LENGTH IS 96.52 (3.80) THE FRONT MOUNTING HOLE, NEAREST TO THE SCREW, WILL BE REPLACED WITH AN INDEXING PIN VISUAL INDICATOR OPTION NOT AVAILABLE MUST CLICK 3+ TIMES FOR PROPER INSTALLATION nVent may modify standard parts without prior notice to or approval from customers. These modifications may change product appearance, but will not have a detrimental effect on form, fit or function. (c)2018 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice.