SPECIFICATION CONTROL DRAWING Product Revision Product Name SO63-1-00 E Ident. Code SO631R SO63-2-00 E SO632R SO63-3-00 E SO633R SO63-4-00 E SO634R SO63-5-00 E SO635R L1.75 (L0.07) 16.5 (0.650) 16.5 (0.650) 16.5 (0.650) 19.1 (0.750) 19.1 (0.750) Product Dimensions oA oB min min 1.90 2.65 (0.075) (0.105) 2.65 3.68 (0.105) (0.145) 4.30 5.08 (0.170) (0.200) 5.95 6.45 (0.235) (0.255) 7.00 7.60 (0.275) (0.300) C min 8.25 (0.325) 8.25 (0.325) 8.25 (0.325) 8.25 (0.325) 8.25 (0.325) oD max 1.90 (0.075) 2.65 (0.105) 4.30 (0.170) 5.95 (0.235) 7.00 (0.275) Cable Dimensions oE oF max min 2.65 0.90 (0.105) (0.035) 3.68 1.40 (0.145) (0.055) 5.08 2.15 (0.200) (0.085) 6.45 3.30 (0.255) (0.130) 7.60 4.30 (0.300) (0.170) oG min 0.50 (0.020) 0.75 (0.030) 1.25 (0.050) 1.80 (0.070) 2.50 (0.100) MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride. 2. SOLDER PREFORM WITH FLUX AND THERMAL INDICATOR: SOLDER: TYPE Sn63 per ANSI-J-STD-006. FLUX: TYPE ROL1 per ANSI-J-STD-004. THERMAL INDICATOR: Fusible ring, melt point: 221C. 3. MELTABLE RINGS: Environment resistant thermoplastic. Color: blue. APPLICATION 1. These parts are designed to provide an environment resistant shield terminations on cables, rated for 125C minimum, meeting the dimensional criteria listed, having tin or silver plated shields and insulation compatible with the insert material. For compatible insulations, see MIL-S-83519/1 or consult Raychem. 2. When installed per Raychem process standard RCPS-100-70, assemblies will meet requirements of Raychem Specification RT-1404 and MIL-S-83519. 3. Temperature range: -55C to +150C. For best results, prepare the cable as shown: * A trademark of TycoCorporation. Tyco Electronics Corporation 300 Constitutional Drive Menlo Park, CA 94025 USA RAYCHEM UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCHES DIMENSIONS ARE BETWEEN BRACKETS. Tyco Corporation reserves the right to amend ANGLES: N/A TOLERANCES: this drawing at any time. Users should evaluate 0.00 N/A the suitability of the product for their ROUGHNESS IN 0.0 N/A application. MICRON 0 N/A DRAWN BY: CAGE CODE: REPLACES: DCR NUMBER: M. FORONDA 06090 D981343 D981964 If this document is printed it becomes uncontrolled. Check for the latest revision TITLE: SOLDERSLEEVE* SHIELD TERMINATOR, IMMERSION RESISTANT DOCUMENT NO.: SO63-X-00 DATE: DOC ISSUE: 6 2-Dec-98 PROD. REV.: SEE TABLE SCALE: None SIZE: SHEET: A 1 of 1