OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Reflective Object Sensor
OPB609 Series
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A 07/07
Page 1 of 3
21
43
0° - 20°
0.006 [0.15]
0.059 [1.50]
0.038 [0.95]
0.134 [3.40]
0.107 [2.70]
0.374 [9.5]
Min.
0.134 [3.40]
0.026 [0.65]
0.020 [0.50]
0.026 [0.65]
0.370 [9.4]
Min.
0.071 [1.80]
0.038 [0.95]
OPB609AX
OPB609GU OPB609RA
0.005 [0.12]
Features:
OP609 emitter (940 nm IR-LED)
Unfocused for sensing diffuse surface
Low-cost plastic housing
High-speed phototransistor output
Description:
The OPB609 consists of an 940 nm, Light Emitting Diode (LED) and an NPN silicon Phototransistor, which are
mounted “side-by-side” on parallel axes in a black opaque plastic housing. This unfocused reflective object
sensor is ideal for detection of diffuse materials such as paper, labels, or anything with a matte finish.
Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK
for more information.
Ordering Information
Part
Number
Description
OPB609AX
Reflective Object Sensor
with IR LED
OPB609GU
OPB609RA
Applications:
Non-contact reflective object sensor
Assembly line automation
Machine automation
Machine safety
End-of-travel sensor
Door sensor
Edge detection
Paper jam detection
Mark detection
RoHS
Pin # Function
1 Anode
2 Cathode
3 Collector
4 Emitter
DIMENSIONS ARE IN: INCHES
[ MILLIMETERS]
CONTAINS POLYSULFONE
To avoid stress cracking, we suggest using ND
Industries’ Vibra-Tite for thread-locking.
Vibra-Tite evaporates fast without causing
structural failure in OPTEK’s molded plastics.
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Reflective Object Sensor
OPB609 Series
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A 07/07
Page 2 of 3
Absolute Maximum Ratings (TA=25°C unless otherwise noted)
Storage and Operating Temperature Range -25° C to +85° C
Lead Soldering Temperature [1/16 inch (1.6 mm) from the case for 5 seconds with soldering iron](1) 260° C(1)
Input LED
Forward DC Current 50 mA
Peak Forward Current (1 μs pulse width, 300 pps) 1 A
Reverse DC Voltage 5 V
Power Dissipation(2) 75 mW
Output Phototransistor
Collector-Emitter Voltage 30 V
Emitter-Collector Voltage 5 V
Collector DC Current 50 mA
Power Dissipation(3) 75 mW
Electrical Characteristics (TA = 25°C unless otherwise noted)
SYMBOL PARAMETER MIN TYP MAX UNITS TEST CONDITIONS
Input IR LED (see OP168 for addi tional information)
VF Forward Voltage - - 1.7 V IF = 20 mA
IR Reverse Current - - 10 µA VR = 5 V
θ Beam Divergence - 90 - Degree IF = 20 mA
Output Phototransistor (see OP508 for additional information)
V(BR)CE0 Collector Emitter Breakdown Voltage 30 - - V IC = 100 µA
V(BR)ECO Emitter Collector Breakdown Voltage 5 - - v IE = 100 µA
ICEO Collector Dark Current - - 100 nA VCE = 10 V, IF = 0
Coupled Characteristics
V CE(SAT) Collector Emitter Saturation Voltage - - 0.4 V EE = 2.0 mW/cm2, IC = 2 mA
I C(ON) On-State Collector Current 0.1 - - mA d = 0.5” (12.7 mm)
IF = 20 mA, Vce = 5 V
I C(OFF) Off-State Collector Current - - 200 nA VCE = 5 V, IF = 20 mA
Notes:
1. RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering.
2. Derate linearly 1.25 mW/°C above 25°C.
3. Derate linearly 1.33mW/°C above 25°C.
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Reflective Object Sensor
OPB609 Series
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A 07/07
Page 3 of 3
OP609 - Norm alized O utput vs Distance
0.00
0.10
0.20
0.30
0.40
0.50
0.60
0.70
0.80
0.90
1.00
0.00 0.05 0.10 0.15 0.20 0.25 0.30 0.35
Distance (inches)
N o rma liz e d O u tp u t