MSP300 Pressure Transducer SPECIFICATIONS Analog Output or 14-Bit Digital Pressure with 11-Bit Temperature Output One Piece Stainless Steel Construction Low Cost 17-4PH or 316L Stainless Steel Customizable The MSP300 pressure transducer from the Microfused line of TE is suitable for measurement of liquid or gas pressure, even for difficult media such as contaminated water, steam, and mildly corrosive fluids. FEATURES One Piece Stainless Steel Construction Ranges up to 15kpsi Digital Pressure and Temperature Output or Analog mV/Amplified Output 1 %Span Accuracy UL Certification (analog only) APPLICATIONS Pumps and Compressors Hydraulic/Pneumatic Systems Automotive Test Systems Energy and Water Management Medical Gas Pressure Leak Detection Remote Measuring Systems General Pressure Measurements SENSOR SOLUTIONS ///MSP300 The transducer pressure cavity is machined from a solid piece of 17-4PH or 316L stainless steel. The standard version includes a 1/4 NPT pipe thread allowing a leak-proof, all metal sealed system. With excellent durability, there are no O-rings, welds or organics exposed to the pressure media. TE's proprietary Microfused technology, derived from demanding aerospace applications, employs micromachined silicon piezoresistive strain gages fused with high temperature glass to a stainless steel diaphragm. This approach achieves media compatibility simply and elegantly while providing an exceptionally stable sensor without the PN junctions of conventional micromachined sensors. This product is geared towards industrial and commercial OEMs for small to high volume applications. Standard configurations are suitable for many applications. Please contact factory for your customization needs. 09/2017 Page 1 MSP300 Pressure Transducer STANDARD RANGES Range (psi) Range (Bar) 0 to 100 0 to 007 0 to 200 0 to 010 0 to 300 0 to 020 0 to 500 0 to 035 0 to 01k 0 to 070 0 to 03k 0 to 200 0 to 05k 0 to 350 0 to 10k 0 to 700 0 to 15k 0 to 01k ALL INTERMEDIATE RANGES ARE STANDARD Gage/Compound PERFORMANCE SPECIFICATIONS (ANALOG) Supply Voltage: 5.0V, Ambient Temperature: 25C (unless otherwise specified) PARAMETERS MIN TYP Pressure Accuracy (RSS combined Non Linearity, Hysteresis & Repeatability) MAX UNITS NOTES 1 %Span BFSL @ 25C -1 Pressure Cycles 1.00E+6 0~F.S. Cycles Proof Pressure 2X Rated Burst Pressure 5X Rated Isolation, Body to Any Lead 50 Long Term Stability (1 year) -0.25 0.25 %Span Zero Thermal Error -2.0 2.0 %Span Over comp. temp Span Thermal Error -2.0 2.0 %Span Over comp. temp Zero Offset (mV Output) -3.0 3.0 %Span @ 25C Zero Offset (V Output) -2.0 2.0 %Span @ 25C Span Tolerance -2.0 2.0 %Span @ 25C 0 55 C Operating Temperature -20 +85 C Storage Temperature -40 +85 Compensated Temperature M C Load Resistance (RL, mV Output) 1 M Load Resistance (RL, V Output) 5 K Response Time 1 @ 250VDC ms Bandwidth DC to 1KHz (typical) Shock 50g, 11 msec Half Sine Shock per MIL-STD-202G, Method 213B, Condition A Vibration 20g, MIL-STD-810C, Procedure 514.2-2, Curve L Wetted Material (except elastomer seal) 17-4PH or 316L Stainless Steel For custom configurations, consult factory. SENSOR SOLUTIONS ///MSP300 11/2017 Page 2 MSP300 Pressure Transducer PERFORMANCE SPECIFICATIONS (DIGITAL) Supply Voltage: 3.3V, Ambient Temperature: 25C (unless otherwise specified) PARAMETERS MIN TYP Supply Voltage Output at Zero Pressure Output at FS Pressure MAX UNITS 5.0 VDC 2.7 720 1000 1280 Count 14720 15000 15280 Count Current Consumption 3.5 mA Proof Pressure 2X Rated Burst Pressure 5X Rated Isolation, Body to Any Lead 50 M 1.00E+6 0~F.S. Cycles Pressure Cycles Pressure Accuracy (RSS combined Non Linearity, Hysteresis & Repeatability) Temperature Accuracy -1 1 NOTES %Span @ 250VDC BFSL @ 25C -3 3 C 1 Zero Thermal Error -2.0 2.0 %Span Over comp. temp Span Thermal Error -2.0 2.0 %Span Over comp. temp Long Term Stability (1 year) -0.25 0.25 %Span @ 25C Compensated Temperature 0 55 C 512 1075 Count 3 ms @ 4MHz Non-sleep mode, 2 Sleep mode, 2 Compensated Temperature Output Response time Response time 8.4 ms @ 4MHz Operating Temperature -20 +85 C Storage Temperature -40 +85 C Shock 50g, 11 msec Half Sine Shock per MIL-STD-202G, Method 213B, Condition A Vibration 20g, MIL-STD-810C, Procedure 514.2-2, Curve L Wetted Material (except elastomer seal) 17-4PH or 316L Stainless Steel For custom configurations, consult factory. Notes 1. Reflect pressure port diaphragm temperature over the compensated temperature range. 2. Response time is from power on to reading measurement data. 3. Maximum cable length for I2C output is 10meter and 2.5meter for SPI output. SENSOR SOLUTIONS ///MSP300 11/2017 Page 3 MSP300 Pressure Transducer DIMENSIONS CODE 2 4 PORT 1/4-19 BSPP DIM C 0.453[11.50] CODE CONNECTION TYPE 1 CABLE 2 FT 2 CABLE 4 FT 3 CABLE 10 FT 7/16-20 UNF-A MALE SAE J514 STRAIGHT THREAD ORING BUNA-N 70SH-904, ID8.92mm x W1.83mm 0.435[11.05] M CABLE 1 M 1/4-18 NPT 0.596[15.14] N CABLE 2 M 0.475[12.06] P CABLE 5 M R CABLE 10 M 5 6 1/8-27 NPT E 1/4-19 BSPT 0.50[12.70] F 1/4-19 BSPP FEMALE 0.70[17.78] K 1/8-27 NPT FEMALE 0.70[17.78] P 7/16-20 UNF-2A FEMALE SAE J514 STRAIGHT THREAD WITH INTEGRAL VALVE DEPRESSOR 0.689[17.50] Q M10 x 1.0 mm 0.42[10.67] S M12 x 1.5 mm 0.53[13.46] U G/14 DIN 3852 FORM E GASKET DIN3869-14 NBR 0.547[13.90] W M20 x 1.5 mm 0.702[17.83] OUTPUT (ANALOG) Code 1 2 3 4 5 Output 0 - 50mV 0 - 100mV 0.5 - 4.5V 1 - 5V 4 - 20mA Supply 5V 5V 5 0.25V 10 - 30V 9 - 30V Ratiometricity Yes Yes Yes No No Red +Supply +Supply +Supply +Supply +Supply Black -Supply -Supply Common Common -Supply Green +Output +Output Cut Off Cut Off Cut Off White -Output -Output +Output +Output Cut Off Black -Supply -Supply Green SCL SCLK White SDA MISO Yellow -SS OUTPUT (DIGITAL) Code J S Output I2C SPI SENSOR SOLUTIONS ///MSP300 Supply 2.7 - 5.0V 2.7 - 5.0V Red +Supply +Supply 11/2017 Page 4 MSP300 Pressure Transducer PRESSURE OUTPUT SENSOR SOLUTIONS ///MSP300 11/2017 Page 5 MSP300 Pressure Transducer TEMPERATURE OUTPUT SENSOR SOLUTIONS ///MSP300 11/2017 Page 6 MSP300 Pressure Transducer ORDERING INFORMATION M30 3 3 - 1 0 0 0 0 K - 350B G Output Code 1 2 3 4 5 J* S* Output Signal 0-50mV 0-100mV 0.5-4.5V 1-5V 4-20mA I2C SPI Supply Voltage 5V 5V 50.25V 10-30V 9-30V 2.7-5.0V 2.7-5.0V Pressure Reference G Gauge C Compound Pressure Ranges Psi Bar Std Std 100P 007B 200P 010B 300P 020B 500P 035B 01KP 070B 03KP 200B 05KP 350B 10KP 700B 15KP 01KB *Digital Options Cable Length 1 2 feet 2 4 feet 3 10 feet M 1 meter N 2 meter P 5 meter R 10 meter All Intermediate Ranges are Standard Pressure Port Code Port Type 2 1/4-19 BSPP 7/16-20 UNF-2A Male SAE J514 Straight Thread O-Ring Boss O-Ring 4 BUNA-N 70SH-904 ID8.92mm X W1.83mm 5 1/4-18 NPT 6 1/8-27 NPT E 1/4-19 BSPT F 1/4-19 BSPP Female K 1/8-27 NPT Female 7/16-20 UNF-2A Female SAE J514 P Straight Thread w/ Integral Valve Depressor Q M10x1.0mm S M12x1.5mm G1/4 DIN 3852 Form E Gasket U DIN3869-14 NBR W M20 x 1.5mm Port Material 0 17-4PH Stainless Steel 1 316L Stainless Steel Cleaning 0 No Selection 1 Oxygen Clean B40.1, Level IV Sleep (Digital Only) 0 Non-sleep Mode 1 Sleep Mode Code Address for I2C (Digital Only) 0 0X28H 1 0x36H 2 0x46H 3 0x48H 4 0x51H SPI Default Code `0' NORTH AMERICA EUROPE ASIA Measurement Specialties, Inc., a TE Connectivity Company Phone: 800-522-6752 Email: customercare.frmt@te.com Measurement Specialties (Europe), Ltd., a TE Connectivity Company Phone: +31 73 624 6999 Email: customercare.lcsb@te.com Measurement Specialties (China), Ltd., a TE Connectivity Company Phone: 0400-820-6015 Email: customercare.shzn@te.com Dim C 0.453[11.50] 0.435[11.05] 0.596[15.14] 0.475[12.06] 0.50[12.70] 0.70[17.78] 0.70[17.78] 0.689[17.50] 0.420[10.67] 0.53[13.90] 0.547[13.90] 0.702[17.83] TE.com/sensorsolutions Measurement Specialties, Inc., a TE Connectivity company. Measurement Specialties, TE Connectivity, TE Connectivity (logo) and EVERY CONNECTION COUNTS are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity`s obligations shall only be as set forth in TE Connectivity`s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application. (c) 2015 TE Connectivity Ltd. family of companies SENSOR SOLUTIONS ///MSP300 All Rights Reserved. 11/2017 Page 7