MBRB1645-E345 - VISHAY - Product.Network

MBRF16xx, MBRB16xx

www.vishay.com Vishay General Semiconductor

Revision: 26-Sep-2018 1Document Number: 88671

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Schottky Barrier Rectifier

FEATURES

• Power pack

• Guardring for overvoltage protection

• Low power loss, high efficiency

• Low forward voltage drop

• High forward surge capability

• High frequency operation

• Meets MSL level 1, per J-STD-020, LF maximum peak

of 245 °C (for D2PAK (TO-263AB) package)

• Solder bath temperature 275 °C maximum, 10 s, per

JESD 22-B106 (for ITO-220AC package)

• AEC-Q101 qualified

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

TYPICAL APPLICATIONS

For use in low voltage, high frequency rectifier of switching

mode power supplies, freewheeling diodes, DC/DC

converters, and polarity protection application.

MECHANICAL DATA

Case: ITO-220AC, D2PAK (TO-263AB)

Molding compound meets UL 94 V-0 flammability rating

Base P/N-E3 - RoHS-compliant, commercial grade

Base P/NHE3_X - RoHS-compliant, AEC-Q101 qualified

(“_X” denotes revision code, e.g. A, B, ...)

Terminals: matte tin plated leads, solderable per

J-STD-002 and JESD 22-B102

E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix

meets JESD 201 class 2 whisker test

Polarity: as marked

Mounting Torque: 10 in-lbs maximum

PRIMARY CHARACTERISTICS

IF(AV) 16 A

VRRM 35 V to 60 V

IFSM 150 A

VF 0.57 V, 0.65 V

TJ max. 150 °C

Package ITO-220AC, D2PAK (TO-263AB)

Circuit configuration Single

ITO-220AC

MBRF16xx MBRB16xx

PIN 1

PIN 2

HEATSINK

PIN 2

PIN 1

PAK (TO-263AB)

MAXIMUM RATINGS (TC = 25 °C unless otherwise noted)

PARAMETER SYMBOL MBRB1635 MBRB1645 MBRB1660 UNIT

Maximum repetitive peak reverse voltage VRRM 35 45 60

VWorking peak reverse voltage VRWM 35 45 60

Maximum DC blocking voltage VDC 35 45 60

Maximum average forward rectified current at TC = 125 °C IF(AV) 16

Peak forward surge current 8.3 ms single half sine-wave

superimposed on rated load IFSM 150

Peak repetitive reverse current at tp = 2.0 µs, 1 kHz IRRM 1.0 0.5

Voltage rate of change (rated VR) dV/dt 10 000 V/μs

Operating junction temperature range TJ-65 to +150 °C

Storage temperature range TSTG -65 to +175

Isolation voltage (ITO-220AC only) from terminal to heatsink

t = 1 min VAC 1500 V

MBRF16xx, MBRB16xx

www.vishay.com Vishay General Semiconductor

Revision: 26-Sep-2018 2Document Number: 88671

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Notes

(1) Pulse test: 300 μs pulse width, 1 % duty cycle

(2) Pulse test: pulse width  40 ms

Note

(1) AEC-Q101 qualified

(2) 60 V available in D2PAK (TO-263AB) package only

ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted)

PARAMETER SYMBOL TEST CONDITIONS MBRB1635 MBRB1645 MBRB1660 UNIT

Maximum instantaneous forward voltage VF (1) IF = 16 A TC = 25 °C 0.63 0.75 V

IF = 16 A TC = 125 °C 0.57 0.65

Maximum instantaneous reverse current 

at DC blocking voltage IR (1) Rated VR

TC = 25 °C 0.2 1.0 mA

TC = 125 °C 40 50

THERMAL CHARACTERISTICS (TC = 25 °C unless otherwise noted)

PARAMETER SYMBOL MBRF MBRB UNIT

Typical thermal resistance from junction to case RJC 3.0 1.5 °C/W

ORDERING INFORMATION (Example)

PACKAGE PREFERRED P/N UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE

ITO-220AC MBRF1645-E3/45 1.94 45 50/tube Tube

TO-263AB MBRB1645-E3/45 (2) 1.33 45 50/tube Tube

TO-263AB MBRB1645-E3/81 (2) 1.33 81 800/reel Tape and reel

ITO-220AC MBRF1645HE3_A/P (1) 1.94 P 50/tube Tube

TO-263AB MBRB1645HE3_B/P (1)(2) 1.33 P 50/tube Tube

TO-263AB MBRB1645HE3_B/I (1)(2) 1.33 I 800/reel Tape and reel

MBRF16xx, MBRB16xx

www.vishay.com Vishay General Semiconductor

Revision: 26-Sep-2018 3Document Number: 88671

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

RATINGS AND CHARACTERISTICS CURVES (TC = 25 °C unless otherwise noted)

Fig. 1 - Forward Current Derating Curve

Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current

Fig. 3 - Typical Instantaneous Forward Characteristics

Fig. 4 - Typical Reverse Characteristics

Fig. 5 - Typical Junction Capacitance

Fig. 6 - Typical Transient Thermal Impedance

050 100 150

Resistive or Inductive Load

Average Forward Current (A)

Case Temperature (°C)

110 100

100

125

150

= T

Max.

8.3 ms Single Half Sine-Wave

Number of Cycles at 60 Hz

Peak Forward Surge Current (A)

00.2 0.4 0.6 0.81.0 1.2

0.01

0.1

100

TJ = 150 °C

TJ = 25 °C

Instantaneous Forward Voltage (V)

Instantaneous Forward Current (A)

Pulse Width = 300 µs

1 % Duty Cycle

MBRB1635, MBRB1645

MBRB1660

020 40 60 80100

0.001

0.01

0.1

100

= 125 °C

= 75 °C

= 25 °C

MBRB1635, MBRB1645

MBRB1660

Percent of Rated Peak Reverse Voltage (%)

Instantaneous Reverse Current (mA)

0.1 110 100

100

1000

10 000

= 25 °C

f = 1.0 MHz

sig

= 50 mV

p-p

Reverse Voltage (V)

Junction Capacitance (pF)

MBRB1635, MBRB1645

MBRB1660

0.01 0.1 110 100

0.1

100

t - Pulse Duration (s)

Transient Thermal Impedance (°C/W)

MBRF16xx, MBRB16xx

www.vishay.com Vishay General Semiconductor

Revision: 26-Sep-2018 4Document Number: 88671

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

PACKAGE OUTLINE DIMENSIONS in inches (millimeters)

ITO-220AC

0.025 (0.64)

0.015 (0.38)

0.404 (10.26)

0.384 (9.75)

0.076 (1.93) REF.

45° REF.

0.600 (15.24)

0.580 (14.73)

0.560 (14.22)

0.530 (13.46)

0.035 (0.89)

0.025 (0.64)

0.205 (5.21)

0.195 (4.95)

0.191 (4.85)

0.171 (4.35)

0.057 (1.45)

0.045 (1.14)

0.671 (17.04)

0.651 (16.54)

0.028 (0.71)

0.020 (0.51)

0.110 (2.79)

0.100 (2.54)

7° REF.

0.350 (8.89)

0.330 (8.38)

0.140 (3.56) DIA.

0.125 (3.17) DIA.

0.135 (3.43) DIA.

0.122 (3.08) DIA.

0.110 (2.79)

0.100 (2.54)

0.190 (4.83)

0.170 (4.32)

D2PAK (TO-263AB) Mounting Pad Layout

0.670 (17.02)

0.591 (15.00)

0.105 (2.67)

0.095 (2.41)

0.08 (2.032) MIN.

0.15 (3.81) min.

0.33 (8.38) min.

0.42 (10.66) min.

0.140 (3.56)

0.110 (2.79)

0.021 (0.53)

0.014 (0.36)

0.110 (2.79)

0.090 (2.29)

0 to 0.01 (0 to 0.254)

0.055 (1.40)

0.047 (1.19)

0.055 (1.40)

0.045 (1.14)

0.190 (4.83)

0.160 (4.06)

0.205 (5.20)

0.195 (4.95)

0.624 (15.85)

0.591 (15.00)

0.037 (0.940)

0.027 (0.686)

0.105 (2.67)

0.095 (2.41)

0.360 (9.14)

0.320 (8.13)

0.411 (10.45)

0.380 (9.65)

0.245 (6.22)

MIN.

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 01-Jan-2019 1Document Number: 91000

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.