Axial Leaded Glass PIN Diodes Multi Purpose Axial Leaded Glass PIN Diodes Glass Package Styles Features V6 Glass Hermetically Sealed Packages Large Signal Switch Design Available in Low Capacitance Passivated Chip for Low Leakage Current Tape and Reel Packaging Available Fully RoHS Compliant MIL-STD 19500 Screening Available ODS 4, 54 , 139, 146 Description M/A-COM Technology Solutions series of low and medium power glass PIN diodes are specifically designed for use in switches, duplexers, electrically tuned digital filters AGC attenuators, TR switches and RF modulators. They preform particularly well in distortion sensitive environments from HF through S-Band. These hermetically sealed axial leaded PIN diodes are designed for use in the harshest commercial and military applications where their inherent ruggedness makes them an ideal choice. They may ordered screened to meet MIL-STD 19500 requirements. Absolute Maximum Ratings TAMB = +25C (Unless Otherwise Noted) 1 Parameter D.C. Reverse Voltage Absolute Maximum (See Tables) Operating Temperature Storage Temperature -55C to +175C -55C to +200C Installation Temperature +280C for 10 Seconds Power Dissipation Listed Below Will De-Rate Linearly to 0mW at 175C Case Style 54 250mW without heatsink Case Style 139 500mW without heatsink Case Style 4 & 146 1000mW without heatsink Notes 1. Operation of this device above any one of these parameters may cause permanent damage. PIN Chip Glass Cylinder Tin Plated Dumet Leads Design Recommendations The axial leaded, glass, PIN diode series is available in four glass package styles. The ODS 54 is the most suitable to meet low power, low capacitance requirements for high isolation in a series connected switch at VHF frequencies. The ODS 4, 139 and 146 are most suited for moderate power applications requiring low package inductance. M/A-COM Technology Solutions silicon PIN diode chips are also available in a wide variety of alternative package styles besides glass. For case style options, availability and electrical specifications, please refer to the "Packaged PIN Diode Datasheet" located on the M/A-COM Technology Solutions website at : www.macomtech.com/DataSheets/packagedpindiodes.pdf 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.43537383 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. Axial Leaded Glass PIN Diodes Multi Purpose Axial Leaded Glass PIN Diodes Part Number MA47120 1N5719 V6 Unless otherwise noted Unless otherwise noted Package Style Rev. Volt. VR < 10 A VDC Max. Cap. 1MHz CT @ -50V pF Max. Series Res. 54 35 1.00 1 0.5 54 5 100 Carrier 4 Lifetime I Region Length S Mils 3.0 0.4 1.0 2.0 1.5 0.1 0.8 100MHz RS @ 10mA 1.5 0.35 3 Nominal Characteristics 2 MA4P203 54 100 0.25 MA47047 54 200 0.30 3.0 1.0 2.0 MA47600 54 200 0.30 6.0 2.0 4.0 1.0 1.0 MA4P404 54 250 0.30 Rev. Volt.5 Part Number Max. Cap. 1MHz Max. Series Res. 100MHz CT @ -50V pF Nominal Characteristics Carrier Lifetime4 I Region Length RS @ 10mA S Mils 1.20 0.6 1.0 0.8 200 0.55 6.0 2.0 4.0 200 0.50 3.0 1.0 2.0 Max. Cap. 1MHz Max. Series Res. 100MHz CT @ -50V pF Package Style VR < 10 A VDC MA4PH151 139 100 MA47110 139 MA47123 139 Rev. Volt. Part Number .60 2 5 Nominal Characteristics Carrier Lifetime4 I Region Length RS @ 50mA S Mils 3.0 3.0 Package Style VR < 10 A VDC MA47266 146 200 1.50 0.6 MA4PH301 146 200 1.10 1.0 Rev. Volt.5 Max. Cap. 1MHz Max. Series Res. 100MHz CT @ -100V pF RS @ 100mA 5.0 5.0 Nominal Characteristics Carrier Lifetime4 I Region Length Package Style VR < 10 A VDC MA4P504 4 500 0.35 0.60 1.0 2.0 MA4P505 4 500 0.50 0.45 2.0 2.0 MA4P506 4 500 0.85 0.30 3.0 2.0 MA4P606 4 1000 0.70 0.70 4.0 4.0 Part Number S Mils Notes: 1. Tested at VR = 20V. 2. Tested at IF = 50mA. 3. Tested at VR = 10V. 4. Nominal carrier lifetime, TL, specified at IF = + 10mA , IREV = - 6mA. 5. Minimum specified reverse voltage, VR, is sourced and the resultant reverse leakage current, IR, is measured to be <10A. 2 *Specifications subject to change without notice ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.43537383 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. Axial Leaded Glass PIN Diodes Multi Purpose Axial Leaded Glass PIN Diodes V6 Typical RS vs. IF @ TAMB = +25C 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.43537383 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. Axial Leaded Glass PIN Diodes Multi Purpose Axial Leaded Glass PIN Diodes V6 SERIES RESISTANCE Rs (OHMS) Typical RS vs. IF @ TAMB = +25C SERIES RESISTANCE Rs (OHMS) FORWARD CURRENT (IF) FORWARD CURRENT (IF) 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.43537383 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. Axial Leaded Glass PIN Diodes Multi Purpose Axial Leaded Glass PIN Diodes V6 Package Outline Dimensions B A C D (2 plcs) Package Style Dimension A Dimension B Dimension C Dimension D (Min.) Mils mm Mils mm Mils mm Mils mm 4 265 35 7.33 .89 96 11 2.44 .28 20 2 .51 .05 1000 25.4 54 155 10 3.94 .25 71 3 1.8 .08 15 1 .38 .03 1000 25.4 139 150 15 3.81 .38 60 10 1.52 .25 20 3 .51 .08 1000 25.4 146 220 20 5.59 .51 95 10 2.41 .25 30 3 .51 .08 1000 25.4 Assembly Recommendations * Leads on axial leaded devices must be formed while being held firm. Bending the leads too close to the body of the part may cause internal damage to the device. Bends <0.060" from body are not recommended. Appropriate fixturing should be used. * Devices may be soldered using standard 60/40, Sn/Pb or RoHS compliant solders. Axial leads are tin plated, 50M, thick to ensure an optimum connection. * For recommended Sn/Pb and RoHS soldering profiles See Application Note M538 on the M/A-COM Technology Solutions website. 5 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.43537383 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. Axial Leaded Glass PIN Diodes Multi Purpose Axial Leaded Glass PIN Diodes V6 Environmental Ratings M/A-COM Technology Solutions axially leaded glass PIN diodes are designed to meet most environmental and electrical requirements and may be ordered screened to MIL-STD-19500. Examples of the methods and conditions are described in the table below. TEST METHOD MIL-STD 750 DESCRIPTION/ CONDITIONS Moisture Resistance 1021 85C, 85% Relative Humidity High Temperature Storage 1031 +175C HTRB 1038 80% of rated VR, 50C Temperature Cycling 1051 -65C to +175C, 20 Cycles Shock 2016 500 g's Vibration 2056 15 g's Solderability 2026 IPC/JDEC J-STD-02 Constant Acceleration 2006 20,000 g's Fine Leak 1071 H Gross Leak 1071 C or E Ordering Information M/A-COM Technology Solutions glass PIN diodes are tape and reeled in 1000 piece quantities. The various base part numbers are only available in the case styles as shown in the tables on page 2. To order, indicate the base part number followed by a dash and the indicated package style. Also add a "T" at the end for tape and reel For example: The MA4P504-4T is the MA4P504 chip in case style 4, tape and reeled. *Specifications subject to change without notice 6 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 * Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, * India Tel: +91.80.43537383 * China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.