TND311S
No. A0416-1/5
Features
Dual inverter.
Monolithic structure (High voltage CMOS process adopted).
Withstand voltage of 25V is assured.
Wide range of operating voltage : 4.5V to 25V.
Peak outpout current : 2A.
Fast switching time (25ns typical at 1000pF load).
Fully compatible input to TTL / CMOS. (VIH=not more than 2.6V, at VDD=4.5 to 25V)
Built-in input pull-down resistance.
Specifications
Absolute Maximum Ratings at Ta=25°C
Parameter Symbol Conditions Ratings Unit
Supply Voltage VDD 0 to 25 V
Input Voltage VIN GND--0.3 to VDD+0.3 V
Allowable Power Dissipation PD max 0.3 W
Junction Temperature Tj --55 to +150 °C
Storage Temperature Tstg --55 to +150 °C
Recommended Operating Conditions at Ta=25°C
Parameter Symbol Conditions Ratings Unit
Operating Supply Voltage VDD 4.5 to 25 V
Operating Temperature Topr --40 to +125 °C
Electrical Characteristics (AC Characteristics) at Ta=25°C, VDD=18V, VIN=5V
Ratings
Parameter Symbol Conditions min typ max Unit
Turn-On Rise Time trCL=1000pF 20 35 ns
Turn-Off Fall Time tfCL=1000pF 25 40 ns
Delay T ime tD1C
L=1000pF 25 40 ns
tD2C
L=1000pF 45 60 ns
SANYO Semiconductors
DATA SHEET
D0606IP TI IM TB-00001541
Any and all SANYO Semiconductor products described or contained herein do not have specifications
that can handle applications that require extremely high levels of reliability, such as life-support systems,
aircraft's control systems, or other applications whose failure can be reasonably expected to result in
serious physical and/or material damage. Consult with your SANYO Semiconductor representative
nearest you before using any SANYO Semiconductor products described or contained herein in such
applications.
SANYO Semiconductor assumes no responsibility for equipment failures that result from using products
at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition
ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor
products described or contained herein.
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
TND311S
ExPD (Excellent Power Device)
General Purpose Driver for PDP Sustain Pulse Drive, Motor Drive,
Switching Power Supply, and DC / DC Converter Applications
Ordering number : ENA0416
TND311S
No. A0416-2/5
Electrical Characteristics (DC Characteristics) at Ta=25°C, VDD=4.5 to 25V
Ratings
Parameter Symbol Conditions min typ max Unit
Logic “1” Input Voltage VIH 2.6 V
Logic “0” Input Voltage VIL 0.8 V
Logic “1” Input Bias Current IIN+V
IN=VDD=25V 20 55 µA
Logic “0” Input Bias Current IIN-- VIN=0V or VDD --1 1 µA
High Level Output Voltage VOH IO=0A VDD--0. 1 V
Low Level Output Voltage VOL IO=0A 0.1 V
VDD Supply Current Isupp VDD=10V, VIN=3V, (both inputs) 1.0 4.5 mA
VDD=10V, VIN=0V, (both inputs) 0.2 mA
Output High Short Circuit Pulsed Current IO+V
DD=18V, PW10µs, VOUT=0V 2.0 A
Output Low Short Circuit Pulsed Current IO-- VDD=18V, PW10µs, VOUT=18V 2.0 A
Output On Resistance ROUT VDD=18V, Iload=10mA, VOUT=“H” 4 6
VDD=18V, Iload=10mA, VOUT=“L” 3 5
Package Dimensions
unit : mm (typ)
7005-007
Block Diagram
14
58
5.0
4.4
6.0 0.3
1.5
1.8 MAX
0.1
0.595 1.27
0.2
0.43
1 : NC
2 : IN A
3 : GND
4 : IN B
5 : OUT B
6 : VDD
7 : OUT A
8 : NC
SANYO : SOP8
VDD
IN OUT
GND
TND311S
No. A0416-3/5
Switching Time Measuring Circuit
90%
INPUT
INPUT RISE
AND FALL
TIMES=5ns
INVERTING
OUTPUT
90%
90%
10%
10%
10%
+5V
+0.4V
+18V
0V
0.1µF
OUTPUT A
1000pF
1000pF
OUTPUT B
INPUT A
INPUT B
4.7µF
tr
tf
tD1tD2
VDD=18V
TND311S
IT03750
tr -- Tc
--50 0 2575 15012550 100--25
--50 0 2575 15012550 100--25
0
10
20
50
30
40
05 20 3015 2510
05 20 3015 2510
0
10
20
50
30
40
IT03751
tr -- VDD
IT03752
tf -- Tc
0
10
20
50
30
40
0
10
20
50
30
40
IT03753
tf -- VDD
Turn-On Rise Time, tr -- ns
Case Temperature, Tc -- °C
Turn-On Rise Time, tr -- ns
Supply Voltage, VDD -- V
Turn-Off Fall Time, tf -- ns
Case Temperature, Tc -- °C
Turn-Off Fall Time, tf -- ns
Supply Voltage, VDD -- V
VDD=18V
VIN=5V
CL=1000pF
VDD=18V
VIN=5V
CL=1000pF
VIN=5V
CL=1000pF
VIN=5V
CL=1000pF
TND311S
No. A0416-4/5
0020406080100 120 140 160
00
0.05
0.10
0.15
0.20
0.25
0.30
0.35
0.40 PD -- Ta
IT03760
IT03758
IO(+) -- Tc
--50 0 25 75 15012550 100--25
0
1
2
4
3
IT03759
IO(--) -- Tc
--50 0 25 75 15012550 100--25
0
1
2
4
3
Output "High" Short Circuit
Pulsed Current, IO(+) -- A
Output "Low" Short Circuit
Pulsed Current, IO(--) -- A
Case Temperature, Tc -- °C
Allowable Power Dissipation, PD -- W
Ambient Temperature, Ta -- °C
Case Temperature, Tc -- °C
VDD=18V VDD=18V
--50 0 25 75 15012550 100--25
--50 0 25 75 15012550 100--25
IT03754
tD1 -- Tc
0
10
20
50
30
40
05 15 3020 2510
05 15 3020 2510
0
20
40
100
60
80
IT03755
tD1 -- VDD
IT03756
tD2 -- Tc
0
20
40
100
60
80
0
50
100
200
150
IT03757
tD2 -- VDD
Delay T ime, tD1 -- ns
Case Temperature, Tc -- °C
Delay T ime, tD1 -- ns
Supply Voltage, VDD -- V
Delay T ime, tD2 -- ns
Case Temperature, Tc -- °C
Delay T ime, tD2 -- ns
Supply Voltage, VDD -- V
VDD=18V
VIN=5V
CL=1000pF
VDD=18V
VIN=5V
CL=1000pF
VIN=5V
CL=1000pF
VIN=5V
CL=1000pF
IO(±) -- VDD
Output High/Low Short Circuit
Pulsed Current, IO(±) -- A
Supply Voltage, VDD -- V
0153020 25105
0
0.5
1.0
3.5
1.5
2.5
2.0
3.0
IT11081
VIN=5V
CL=10µF
TND311S
No. A0416-5/5
Specifications of any and all SANYO Semiconductor products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state,
and are not guarantees of the performance, characteristics, and functions of the described products
as mounted in the customer's products or equipment. To verify symptoms and states that cannot be
evaluated in an independent device, the customer should always evaluate and test devices mounted
in the customer's products or equipment.
SANYO Semiconductor Co., Ltd. strives to supply high-quality high-reliability products. However, any
and all semiconductor products fail with some probability. It is possible that these probabilistic failures
could give rise to accidents or events that could endanger human lives, that could give rise to smoke or
fire, or that could cause damage to other property. When designing equipment, adopt safety measures
so that these kinds of accidents or events cannot occur. Such measures include but are not limited to
protective circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO Semiconductor products (including technical data,services) described
or contained herein are controlled under any of applicable local export control laws and regulations, such
products must not be exported without obtaining the export license from the authorities concerned in
accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic
or mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Semiconductor Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO Semiconductor product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not
guaranteed for volume production. SANYO Semiconductor believes information herein is accurate
and reliable, but no guarantees are made or implied regarding its use or any infringements of
intellectual property rights or other rights of third parties.
PS
This catalog provides information as of December, 2006. Specifications and information herein are subject
to change without notice.