DATA SHEET PIGTAIL ISOLATOR FIP-X-XX-XX-X-XXXX FEATURES: High reliability Low insertion loss High isolation Optimized for 1310nm, 1490nm or 1550nm wavelengths Wide operating temperature range Complete range of termination connectors available Various fiber colors for easy identification Finisar pigtailed isolators are used in various laser assemblies which require isolation to prevent optical feedback. The isolators offer excellent performance with low insertion loss and high isolation. Our proprietary bonding process, and years of volume manufacturing experience, result in a high reliability record. Bare isolator chips survive more than 5,000hrs of damp heat testing without delamination. Available in single stage or semi-double stage options centered at 1310nm, 1490, or 1550nm, the isolators can be terminated with any standard fiber connector. Various fiber colors are also available, see the product selection guide below for further ordering options. FIP-X-XX-XX-X-XXXX PIGTAIL ISOLATORS SPECIFICATIONS Single Stage Pigtail Isolator Parameter Units Specification CWL nm 1310 1490 1550 Operating Wavelength nm 1290-1330 1470-1510 1530-1570 Insertion Loss (isolator chip) dB <0.4 Maximum Connector Loss dB <0.3 Isolation at Centre Wavelength dB >30dB @ 23C Tilt Angle Degrees Maximum Power Rating mW Operating Temperature C -40 to 85 Storage Temperature C -40 to +100 6 +/-1 4 See Product Selection Connector Type *Note: Over all wavelengths and temperatures. Semi-Double Stage Pigtail Isolator Parameter Units Specification CWL nm 1310 1490 1550 Operating Wavelength nm 1290-1330 1470-1510 1530-1570 Insertion Loss (isolator chip) dB <0.6 Maximum Connector Loss dB <0.3 Isolation at Centre Wavelength dB >45dB @ 23C Tilt Angle Degrees Maximum Power Rating mW Operating Temperature C -40 to 85 Storage Temperature C -40 to +100 Connector Type *Note: Over all wavelengths and temperatures. 6 +/-1 4 See Product Selection FIP-X-XX-XX-X-XXXX MECHANICAL DIMENSIONS - IN MM Single Stage Pigtail Isolator Semi-Double Stage Pigtail Isolator FIP-X-XX-XX-X-XXXX PIGTAIL ISOLATORS PRODUCT SELECTION FIP-X-XX-XX-X-XXXX By Specs: 0000 = Standard XXXX= Custom Connector Type: 4 = SC/APC 0 = None 1 = FC/UPC 5 = LC/UPC 2 = FC/APC X = Special 3 = SC/UPC Bending: 0 = 30mm 1 = 20mm X = Special Fiber Color: 0 = Natural 1 = Bule 2 = Yellow X = Special Wavelength: 31 = 1310nm 49 = 1490nm 55 = 1550nm ....... Stage: S = Single D = Semi-Double Pigtail Isolator Finisar Example: FIP-S-31-00-2-0000 Standard pigtail isolator, 1310nm, single stage, FC/APC connector FIF-X-XX-XX-X-XXXX PIGTAIL ISOLATORS ADVANCED OPTICAL COMPONENTS AOC CAPABILITIES Finisar's ADVANCED OPTICAL COMPONENTS division was formed through strategic acquisition of key optical component suppliers. The company has led the industry in high volume Vertical Cavity Surface Emitting Laser (VCSEL) and associated detector technology since 1996. VCSELs have become the primary laser source for optical data communication, and are rapidly expanding into a wide variety of sensor applications. VCSELs' superior reliability, low drive current, high coupled power, narrow and circularly symmetric beam and versatile packaging options (including arrays) are enabling solutions not possible with other optical technologies. ADVANCED OPTICAL COMPONENTS is also a key supplier of Fabrey-Perot (FP) and Distributed Feedback (DFB) Lasers, and Optical Isolators (OI) for use in single mode fiber data and telecommunications networks ADVANCED OPTICAL COMPONENTS' advanced capabilities include: 1, 2, 4, 8, and 10Gbps serial VCSEL solutions 1, 2, 4, 8, and 10Gbps serial SW DETECTOR solutions VCSEL and detector arrays 1, 2, 4, 8, and 10Gbps FP and DFB solutions at 1310 and 1550nm 1, 2, 4, 8, and 10Gbps serial LW DETECTOR solutions Optical Isolators from 1260 to 1600nm range Laser packaging in TO46, TO56, and Optical subassemblies with SC, LC, and MU interfaces for communication networks VCSELs operating at 670nm, 780nm, 980nm, and 1310nm in development LOCATION Allen, TX - Business unit headquarters, VCSEL wafer growth, wafer fabrication and TO package assembly. Fremont, CA - Wafer growth and fabrication of 1310 to 1550nm FP and DFB lasers. Sensor packages include surface mount, various plastics, chip on board, chipscale packages, etc. Custom packaging options Shanghai, PRC - Optical passives assembly, including optical isolators and splitters. SALES AND SERVICE Finisar's ADVANCED OPTICAL COMPONENTS division serves its customers through a worldwide network of sales offices and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact a nearby sales office or call the number listed below. Phone:1-866-MY-VCSEL USA (toll free) 1-214-509-2700 USA (Direct dial) 44 (0) 174 336 5533 Europe 886-935-409898 China & Taiwan 81-90-4437-1130 Japan 82-11-220-6153 Asia Pacific & Korea Fax: 1-214-509-3709 USA Email: salesAOCD@finisar.com WEB: www.finisar.com/aoc.php (c)2007 Finisar Corporation. All rights reserved. Finisar is a registered trademark of Finisar Corporation. Features and specifications are subject to change without notice. 01/08 Rev A.