313
DC
Splash Proof Fan 140 mm sq.
Model no.
Rated voltage
Operating voltage range
PWM duty
cycle*
[%]
Rated current
Rated input
Rated speed Max. airow
Max. static pressure
SPL
Operating temperature
Expected life
[V] [V] [A] [W] [min-1]
[m³/min]
[CFM] [Pa] [inchH²O] [dB (A)] [˚C] [h]
9WL1412P1A001
12 10.2 to 13.8
100 3.72 44.64 6900 8.0 282 516 2.07 68
-20 to +70
100000/60˚C
20 0.27 3.24 2300 2.66 93 80 0.32 39
9WL1412P1H001 100 1.7 20.4 5200 6.0 212 300 1.2 62
20 0.27 3.24 2300 2.66 93 80 0.32 39
9WL1412P1M001 100 0.6 7.2 3300 3.7 130 170 0.68 46
20 0.16 1.92 1300 1.45 51 26 0.1 29
9WL1424P1A001
24 20.4 to 27.6
100 1.86 44.64 6900 8.0 282 516 2.07 68
20 0.17 4.08 2300 2.66 93 80 0.32 39
9WL1424P1H001 100 0.85 20.4 5200 6.0 212 300 1.2 62
20 0.16 3.84 2300 2.66 93 80 0.32 39
9WL1424P1M001 100 0.3 7.2 3300 3.7 130 170 0.68 46
20 0.11 2.64 1300 1.45 51 26 0.1 29
9WL1448P1A001
48 40.8 to 55.2
100 0.92 44.16 6900 8.0 282 516 2.07 68
20 0.11 5.28 2300 2.66 93 80 0.32 39
9WL1448P1H001 100 0.42 20.16 5200 6.0 212 300 1.2 62
20 0.11 5.28 2300 2.66 93 80 0.32 39
9WL1448P1M001 100 0.15 7.2 3300 3.7 130 170 0.68 46
20 0.09 4.32 1300 1.45 51 26 0.1 29
* PWM frequency: 25 kHz. Fan does not rotate when PWM duty cycle is 0%.
The following sensor and control options are available for selection.
Differs according to the model. Refer to the table on pp. 579 to 580.
The models listed below have pulse sensors.
Model no.
Rated voltage
Operating voltage range
Rated current
Rated input Rated speed Max. airow
Max. static pressure
SPL
Operating temperature
Expected life
[V] [V] [A] [W] [min-1]
[m³/min]
[CFM] [Pa] [inchH²O] [dB (A)] [˚C] [h]
9WL1448L1001 48 40.8 to 55.2 0.11 5.3 2300 2.6 91.9 80 0.32 39 -20 to +70
100000/60˚C
The following sensor and control options are available for selection.
Available for all models. Without sensor
Splash Proof Fan
140×140×38 mm
San Ace 140W 9WL type
■General Specications
・ Material ………………………………………… Frame: Aluminum (Black coating), Impeller: Plastic (Flammability: UL 94V-0)
・ Expected life …………………………………… See the table below. (L10 life: 90% survival rate for continuous operation in indoor free air
at 60˚C, rated voltage)
・ Motor protection function ………………… Locked rotor burnout protection, Reverse polarity protection
For details, please refer to p. 547.
・ Dielectric strength …………………………… 50/60 Hz, 500 VAC, for 1 minute (between lead wire conductors and frame)
・ Insulation resistance ………………………… 10 MΩ or more with a 500 VDC megger (between lead wire conductors and frame)
・ Sound pressure level (SPL) ……………… At 1 m away from the air inlet
・ Storage temperature ……………………… -30 to +70˚C (Non-condensing)
・ Lead wire ……………………………………… Red Black Sensor Yellow Control Brown
(For models without PWM control function, there is no speed control wiring.)
・ Mass ……………………………………………… 740 g
・ Ingress protection …………………………… IP68
■Specications
The models listed below have pulse sensors with PWM control function.