812 serial Connector Amphenol Part Number: 842812-xxxx-xxxx - 812 serial IDC Socket connector can be used where quick connect and disconnect capability are required, Termination is fast and simple by means of IDC technology, Available in size from 10 to 64 contacts with or without mild-in center polarizing key, Strain relief may be added to reduce strain on cable when removing connector. A. FEATURES & BENEFITS : MIL-C-83503, BT224, IEC603-13 and BS9525-F0023 compatible. .100"x .100"( 2.54mm x 2.54mm ) grid. One step mass termination with no wire preparation. Double depth slots for polarization ( except 10 & 14 contact sizes ). The mold-in CPK ( center polarizing key ) option is available. The accessories of optional CPK, polarizing plug and strain relief are available. Selective gold plated contacts. Various copper alloy options for contact material. Ribbed cover for correct cable alignment. Open-end cover for feed-through and daisy-chain application. CEC ( Close Entry Cover ) to shield the cable end exposure and to prevent any wrong direction entry. UL and CSA Approved. Standard color grey only. Various packaging options for ease of termination and handling. Mate with 0.025"square pins male header and Amphenol header of 816, 821 & 822 series B. SPECIFICATIONS Physical Characteristics Insulation Material : glass reinforced polyester, UL flammability rating 94V-0. Contact Material : Beryllium Copper or Phoshphor Bronze. Contact Area Plating : Gold over Nickel. Wire Accomodation : AWG 26 and AWG 28 stranded, or AWG 28 and AWG 30 solid. Contact Spacing : .100"( 2.54mm ) grid terminates to .050"( 1.27mm ) flat ribbon cable. Electrical Characteristics Current Rating : 1 Amp. Contact Resistance : 50 m Max. Dielectric Withstanding Voltage : 500Vdc Min. at sea level. 812 series Insulation Resistance : 5,000 M Min. at 500Vdc. Mechanical Characteristics Durability : a. 500 cycles for 30 microinches gold plated. b. 250 cycles for 15 microinches gold plated. c. 50 cycles for gold flash. Mating Force : 8 oz max. per contact. Unmating Force : 2 oz min. per contact. Contact-Body Retention Force : 8 oz min. per contact. Environmental Characteristics Humidity : 95% relative humidity at 40 C for 96 hours. Operating Temperature : -55 C to +105 C C. APPLICATIONS D. OA Equipment Computer, Peripheral Testing Equipment Switching System Industrial Control ORDERING INFORMATION Amphenol 812 series Amphenol Table I No. of Position 10 14 16 20 26 30 34 36 40 50 60 64 Strain Relief 842-800-1206 Grey Black -030 -050 -031 -051 -032 -052 -033 -053 -034 -054 -040 -060 -035 -055 -041 -061 -036 -056 -037 -057 -038 -058 -039 -059 DIM A in .004 mm .10 0.68 [17.27] 0.88 [22.35] 0.98 [24.89] 1.18 [29.97] 1.48 [37.59] 1.68 [42.67] 1.88 [47.75] 1.98 [50.29] 2.18 [55.37] 2.68 [68.07] 3.18 [80.77] 3.38 [85.85] DIM B in .004 mm .10 0.40 [10.16] 0.60 [15.24] 0.70 [17.78] 0.90 [22.86] 1.20 [30.48] 1.40 [35.56] 1.60 [40.64] 1.70 [43.18] 1.90 [48.26] 2.40 [60.96] 2.90 [73.66] 3.10 [78.74] Table II - Options Code 02 03 04 05 06 09 12 13 22 33 34 35 43 44 45 - Black, No CPK, Open Cover Packed separately (obsoleted) Grey, No CPK, Close Cover Packed separately Grey, Mold-in CPK, Close Cover Packed separately Black, No CPK, Close Cover Packed separately (obsoleted) Black, Mold-in CPK, Close Cover Packed separately (obsoleted) Black, No CPK, Open Cover, Pre-latch (obsoleted) Grey, No CPK, Open Cover Packed separately Grey, Mold-in CPK, Open Cover Packed separately Grey, No CPK, Open Cover, Pre-latch Grey, Mold-in CPK, Open Cover, Pre-latch Grey, Mold-in CPK, Close Entry Cover on even side Grey, Mold-in CPK, Close Entry Cover on odd side Grey, No CPK, Close Entry Cover on odd side Grey, No CPK, Close Entry Cover on even side Black, Mold-in CPK, Open Cover, Pre-latch (obsoleted) Optional black color socket is dis-continued. Only standard grey is available. 812 series Amphenol Table III - Plating Code 34 - 30 microinches ( 0.76 microns ) min. gold in mating area, 100 to 200 microinches ( 2.54 to 5.08 microns ) 90/10 tin lead plated in termination area. and 50 microinches ( 1.27 microns ) min. nickel underplated allover. 18 - 15 microinches ( 0.38 microns ) min. gold in mating area, 100 to 200 microinches ( 2.54 to 5.08 microns ) 90/10 tin lead plated in termination area. and 50 microinches ( 1.27 microns ) min. nickel underplated allover. AA - Gold Flash in mating area, 100 to 200 microinches ( 2.54 to 5.08 microns ) 90/10 tin lead plated in termination area. and 50 microinches ( 1.27 microns ) min. nickel underplated allover. Title : Amphenol 812 series connector Part Number : 812 series Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Amphenol: 8428001607006 8428001206036 8428121422134 8428001211002 8428001206035 8428001206034 8428001206033 8428001206031 8428001206032