AON6576 30V N-Channel AlphaMOS General Description Product Summary VDS * Trench Power AlphaMOS (MOS LV) technology * Low RDS(ON) * Low Gate Charge * High Current Capability * RoHS and Halogen-Free Compliant 30V 32A ID (at VGS=10V) Applications RDS(ON) (at VGS=10V) < 4.7m RDS(ON) (at VGS=4.5V) < 7.2m 100% UIS Tested 100% Rg Tested * DC/DC Converters in Computing, Servers, and POL * Isolated DC/DC Converters in Telecom and Industrial DFN5X6 Top View D Top View Bottom View PIN1 1 8 2 7 3 6 4 5 G PIN1 S Orderable Part Number Package Type Form Minimum Order Quantity AON6576 DFN 5x6 Tape & Reel 3000 Absolute Maximum Ratings TA=25C unless otherwise noted Parameter Drain-Source Voltage Symbol VDS Gate-Source Voltage VGS TC=25C Continuous Drain Current G Pulsed Drain Current Continuous Drain Current Avalanche Current C Avalanche energy VDS Spike L=0.05mH C 10s TC=25C Power Dissipation B TC=100C Power Dissipation A TA=70C Thermal Characteristics Parameter Maximum Junction-to-Ambient A Maximum Junction-to-Ambient A D Maximum Junction-to-Case Rev.1.0: January 2014 IAS 33 A EAS 27 mJ VSPIKE 36 V 26 Steady-State Steady-State W 10.4 5 RJA RJC W 3.2 TJ, TSTG Symbol t 10s A 21 PDSM Junction and Storage Temperature Range A 26 PD TA=25C V 128 IDSM TA=70C 20 25 IDM TA=25C Units V 32 ID TC=100C C Maximum 30 -55 to 150 Typ 20 45 4 www.aosmd.com C Max 25 55 4.8 Units C/W C/W C/W Page 1 of 6 Electrical Characteristics (TJ=25C unless otherwise noted) Symbol Parameter STATIC PARAMETERS BVDSS Drain-Source Breakdown Voltage Conditions Min ID=250A, VGS=0V Typ Zero Gate Voltage Drain Current IGSS VGS(th) Gate-Body leakage current VDS=0V, VGS=20V Gate Threshold Voltage VDS=VGS, ID=250A V 1 TJ=55C 1.4 100 nA 1.8 2.2 V 3.9 4.7 5.5 6.7 7.2 RDS(ON) Static Drain-Source On-Resistance VGS=4.5V, ID=20A 5.7 gFS Forward Transconductance VDS=5V, ID=20A 83 VSD Diode Forward Voltage IS=1A,VGS=0V 0.7 IS Maximum Body-Diode Continuous Current TJ=125C DYNAMIC PARAMETERS Input Capacitance Ciss Output Capacitance Crss Reverse Transfer Capacitance Rg Gate resistance VGS=0V, VDS=15V, f=1MHz f=1MHz A 5 VGS=10V, ID=20A Coss Units 30 VDS=30V, VGS=0V IDSS Max 0.7 m m S 1 V 30 A 1320 pF 530 pF 70 pF 1.4 2.1 SWITCHING PARAMETERS Qg(10V) Total Gate Charge 18.8 27 nC Qg(4.5V) Total Gate Charge 8.8 15 nC VGS=10V, VDS=15V, ID=20A Qgs Gate Source Charge 3.7 nC Qgd Gate Drain Charge 4 nC tD(on) Turn-On DelayTime 7 ns tr Turn-On Rise Time tD(off) Turn-Off DelayTime tf trr Turn-Off Fall Time 4 ns IF=20A, dI/dt=500A/s 13.5 Qrr Body Diode Reverse Recovery Charge IF=20A, dI/dt=500A/s 20.6 ns nC Body Diode Reverse Recovery Time VGS=10V, VDS=15V, RL=0.75, RGEN=3 3 ns 21 ns A. The value of RJA is measured with the device mounted on 1in2 FR-4 board with 2oz. Copper, in a still air environment with TA =25C. The Power dissipation PDSM is based on R JA t 10s and the maximum allowed junction temperature of 150C. The value in any given application depends on the user's specific board design. B. The power dissipation PD is based on TJ(MAX)=150C, using junction-to-case thermal resistance, and is more useful in setting the upper dissipation limit for cases where additional heatsinking is used. C. Single pulse width limited by junction temperature TJ(MAX)=150C. D. The RJA is the sum of the thermal impedance from junction to case RJC and case to ambient. E. The static characteristics in Figures 1 to 6 are obtained using <300s pulses, duty cycle 0.5% max. F. These curves are based on the junction-to-case thermal impedance which is measured with the device mounted to a large heatsink, assuming a maximum junction temperature of TJ(MAX)=150C. The SOA curve provides a single pulse rating. G. The maximum current rating is package limited. H. These tests are performed with the device mounted on 1 in2 FR-4 board with 2oz. Copper, in a still air environment with TA=25C. THIS PRODUCT HAS BEEN DESIGNED AND QUALIFIED FOR THE CONSUMER MARKET. APPLICATIONS OR USES AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS ARE NOT AUTHORIZED. AOS DOES NOT ASSUME ANY LIABILITY ARISING OUT OF SUCH APPLICATIONS OR USES OF ITS PRODUCTS. AOS RESERVES THE RIGHT TO IMPROVE PRODUCT DESIGN, FUNCTIONS AND RELIABILITY WITHOUT NOTICE. Rev.1.0: January 2014 www.aosmd.com Page 2 of 6 TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 100 10V 100 4.5V VDS=5V 4V 80 80 60 60 ID(A) ID (A) 3.5V 125C 40 40 20 20 25C VGS=3V 0 0 0 1 2 3 4 0 5 1 3 4 5 6 VGS(Volts) Figure 2: Transfer Characteristics (Note E) VDS (Volts) Figure 1: On-Region Characteristics (Note E) 8 Normalized On-Resistance 1.6 VGS=4.5V 6 RDS(ON) (m ) 2 4 VGS=10V 2 VGS=10V ID=20A 1.4 1.2 VGS=4.5V ID=20A 1 0.8 0 0 5 10 15 20 25 0 30 25 50 75 100 125 150 175 Temperature (C) Figure 4: On-Resistance vs. Junction Temperature (Note E) ID (A) Figure 3: On-Resistance vs. Drain Current and Gate Voltage (Note E) 14 1.0E+02 12 1.0E+01 10 1.0E+00 IS (A) RDS(ON) (m ) ID=20A 8 125C 125C 1.0E-01 6 1.0E-02 4 1.0E-03 25C 25C 2 1.0E-04 0 1.0E-05 2 4 6 8 10 VGS (Volts) Figure 5: On-Resistance vs. Gate-Source Voltage (Note E) Rev.1.0: January 2014 www.aosmd.com 0.0 0.2 0.4 0.6 0.8 1.0 VSD (Volts) Figure 6: Body-Diode Characteristics (Note E) Page 3 of 6 TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 10 2000 VDS=15V ID=20A 8 1600 Capacitance (pF) VGS (Volts) Ciss 6 4 1200 2 800 400 0 Crss 0 0 5 10 15 20 0 Qg (nC) Figure 7: Gate-Charge Characteristics 10 15 20 25 30 500 10s 10s RDS(ON) limited 100s 10.0 DC 1ms 10ms 1.0 TJ(Max)=150C TC=25C 0.1 0.0 0.01 TJ(Max)=150C TC=25C 400 Power (W) 100.0 5 VDS (Volts) Figure 8: Capacitance Characteristics 1000.0 ID (Amps) Coss 300 200 100 0.1 1 10 VDS (Volts) VGS> or equal to 4.5V Figure 9: Maximum Forward Biased Safe Operating Area (Note F) 0 1E-05 0.0001 0.001 100 0.01 0.1 1 10 Pulse Width (s) Figure 10: Single Pulse Power Rating Junction-toCase (Note F) Z JC Normalized Transient Thermal Resistance 10 D=Ton/T TJ,PK=TC+PDM.ZJC.RJC In descending order D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse RJC=4.8C/W 1 0.1 PD Single Pulse Ton T 0.01 1E-05 0.0001 0.001 0.01 0.1 1 10 Pulse Width (s) Figure 11: Normalized Maximum Transient Thermal Impedance (Note F) Rev.1.0: January 2014 www.aosmd.com Page 4 of 6 TYPICAL ELECTRICAL AND THERMAL CHARACTERISTICS 30 40 Power Dissipation (W) 30 Current rating ID(A) 20 10 20 10 0 0 0 25 50 75 100 125 150 0 25 TCASE ( C) Figure 12: Power De-rating (Note F) 50 75 100 125 150 TCASE ( C) Figure 13: Current De-rating (Note F) 10000 TA=25C Power (W) 1000 100 10 1 1E-05 0.001 0.1 10 1000 Z JA Normalized Transient Thermal Resistance Pulse Width (s) Figure 14: Single Pulse Power Rating Junction-to-Ambient (Note H) 10 1 D=Ton/T TJ,PK=TA+PDM.ZJA.RJA RJA=55C/W In descending order D=0.5, 0.3, 0.1, 0.05, 0.02, 0.01, single pulse 0.1 0.01 PD Single Pulse Ton 0.001 0.0001 T 0.001 0.01 0.1 1 10 100 1000 Pulse Width (s) Figure 15: Normalized Maximum Transient Thermal Impedance (Note H) Rev.1.0: January 2014 www.aosmd.com Page 5 of 6 Gate Charge Test Circuit & Waveform Vgs Qg 10V + + Vds VDC - Qgs Qgd VDC - DUT Vgs Ig Charge Resistive Switching Test Circuit & Waveforms RL Vds Vds DUT Vgs 90% + Vdd VDC - Rg 10% Vgs Vgs td(on) tr td(off) ton tf toff Unclamped Inductive Switching (UIS) Test Circuit & Waveforms L 2 EAR= 1/2 LIAR Vds BVDSS Vds Id + Vdd Vgs Vgs I AR VDC - Rg Id DUT Vgs Vgs Diode Recovery Test Circuit & Waveforms Q rr = - Idt Vds + DUT Vgs Vds Isd Vgs Ig Rev.1.0: January 2014 L Isd + Vdd t rr dI/dt I RM Vdd VDC - IF Vds www.aosmd.com Page 6 of 6