GU 1 Form A (AQV21❍, AQV214H)
TYPES
*Indicate the peak AC and DC values.
Note: The surface mount terminal shape indicator “A” and the packing style indicator “X” or “Z” are not marked on the relay.
RATING
6-pin type for switching
low-level analog signal GU 1 F orm A
(AQV21❍, A QV214H)
I/O isolation
Output rating*
Package
Part No. Packing quantity
Through hole
terminal Surface-mount terminal
Load
voltage Load
current Tube packing style Tape and reel packing style Tube Tape and reel
Pick ed from the
1/2/3-pin side Pick ed from the
4/5/6-pin side
AC/DC
dual use
Standard
1,500 V AC
60V 550 mA
DIP6-pin
AQV212 AQV212A AQV212AX AQV212AZ
1 tube contains
50 pcs.
1 batch contains
500 pcs.
1,000 pcs.
100 V 320 mA AQV215 A QV215A A QV215AX AQV215AZ
200 V 180 mA AQV217 A QV217A A QV217AX AQV217AZ
350 V 130 mA AQV210 A QV210A A QV210AX AQV210AZ
400 V 120 mA AQV214 A QV214A A QV214AX AQV214AZ
600 V 50 mA AQV216 A QV216A A QV216AX AQV216AZ
Reinforced
5,000 V 400 V 120 mA AQV214H AQV214HA AQV214HAX AQV214HAZ
TESTING (Reinforced type)(Standard type)
mm inch
FEATURES
1. Controls low-level analog signals
PhotoMOS relays feature extremely low
closed-circuit offset voltage to enable
control of low-le vel analog signals without
distortion.
2. Controls various types of loads
such as relays, motors, lamps and
solenoids
3. Optical coupling for extremely high
isolation
Unlike mechanical rela ys , the PhotoMOS
relay combines LED and optoelectronic
device to transfer signals using light for
extremely high isolation.
4. Eliminates the need for a counter
electromotive force protection diode
in the drive circuits on the input side
5. Stable on-resistance
6. Low-level off state leakage current
of max. 1 µA
7. Reinforced insulation type of I/O
voltage 5,000V also available
TYPICAL APPLICATIONS
• High-speed inspection machines
• Telephone equipment
• Data communication equipment
• Computers
8.8 6.4
3.9
8.8 6.4
3.6
.346 .252
.154
.346 .252
.142
1
2
3
6
5
4
Compliance with RoHS Directive
1. Absolute maximum ratings (Ambient temperature: 25°C 77°F)
Item Sym-
bol
Type of
connec-
tion
AQV212(A) AQV215(A) AQV217(A) AQV210(A) AQV214(A) AQV216(A)
AQV214H(A)
Remarks
Input
LED forward current IF50 mA
LED reverse voltage VR5 V
Peak forward current IFP 1 A f = 100 Hz, Duty factor = 0.1%
Power dissipation Pin 75 mW
Output
Load voltage (peak AC) VL60 V 100 V 200 V 350 V 400 V 600 V 400 V
Continuous load
current IL
A 0.55 A 0.32 A 0.18 A 0.13 A 0.12 A 0.05 A 0.12 A A connection: Peak AC, DC
B, C connection: DC
B 0.65 A 0.42 A 0.22 A 0.15 A 0.13 A 0.06 A 0.13 A
C 0.80 A 0.60 A 0.30 A 0.17 A 0.15 A 0.08 A 0.15 A
Peak load current Ipeak 1.2 A 0.96 A 0.54 A 0.4 A 0.3 A 0.15 A 0.3 A A connection: 100 ms (1 shot),
VL=DC
Power dissipation Pout 500 mW
Total power dissipation PT550 mW
I/O isolation voltage Viso 1,500 V A C
5,000 V A C
Temperature
limits Operating Topr –40°C to +85°C –40°F to +185°FNon-condensing at low temp.
Storage Tstg –40°C to +100°C –40°F to +212°F
PhotoMOS.book Page 79 Thursday, March 26, 2009 2:21 PM
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.