EBF Series Accessory Outlet Filter EBF1 UL Recognized CSA Certified VDE Approved SEMKO Approved* EBF4 EBF Series Specifications The EBF accessory outlet filters provide an innovative means of connecting accessories while filtering noise between a system and the accessories attached. These filters provide enhanced performance utilizing common mode inductance and differential mode capacitance for attenuation of noise across the frequency range. Maximum leakage current, each line-to-ground @ 120 VAC 60 Hz: @ 250 VAC 50 Hz: The filtered connector offers the additional advantage of a grounded connection and features low leakage current required for international usage. Operating frequency: Electrical Schematic Resistor location for reference only. .25 mA .50 mA Hipot rating (one minute): line-to-ground line-to-line 1500 VAC 1450 VDC 50/60 Hz Rated voltage: 120/250 VAC Minimum insertion loss in dB: Line-to-ground in 50 ohm circuit Current Rating .05 .15 Frequency-MHz .5 1 5 10 30 1A 3A 6A 10A 23 10 1 1 32 19 10 5 41 30 22 14 47 50 48 38 40 47 47 47 47 36 28 20 47 48 42 32 Line-to-line in 50 ohm circuit Current Rating .15 .5 Frequency-MHz 1 3 5 10 30 1A 3A 6A 10A 3 2 2 2 14 11 10 10 23 14 14 16 50 44 42 39 44 40 40 40 41 25 20 19 47 38 33 19 BF 24 * Except 10A models Libertyville, IL (847) 680-7400 Series EBF Case Styles Case Dimensions Metric shown in italics. Metric shown in italics. EBF1 A (max) B (max) C (max) .010 .25 D E (max) EBF1 2.57 65.3 1.33 33.8 1.0 25.4 1.575 40.01 1.99 50.5 EBF4 2.09 53.01 1.39 35.31 1.16 29.46 1.575 40.01 1.99 50.5 Part No. Ordering Information Typical dimensions .07 x .16 .07 .250 (3) Holes: Dia.(2) Slot: 1.8 x 4.1 1.8 6.35 .132 Mounting holes: Dia.(2) with .250 Dia. x 90 countersunk 3.35 Terminals: Consult your local Corcom sales representative for pricing. for #4 Flathead Screw EBF4 Available Part Numbers 1EBF1 3EBF1 6EBF1 10EBF1 1EBF4 3EBF4 6EBF4 10EBF4 Wire 18 AWG 10" length Recommended Panel Cutouts Front mount only Libertyville, IL (847) 680-7400 EB 25