MB90F347CASPFR-GS-SPE1 - SPANSION

CLD-CT1374.004

PRODUCT FAMILY DATA SHEET

Cree® PLCC4 1 in 1 SMD LED

CLM2D-RCC/ACC

WWW.CREE.COM/HB

Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.

FEATURES

• Size (mm):3.2 x 2.8

• Color and Typical Dominant

Wavelength:

Red (619 - 624nm)

Amber(584 - 596nm)

• Luminous Intensity (mcd)

CLM2D-RCC:(2800 - 9000)

CLM2D-ACC:(2800 - 9000)

• Moisture Sensitivity Level: 5a

• Lead-Free

• RoHS Compliant

• Untinted Diffused Lens

Cree, Inc.

4600 Silicon Drive

Durham, NC 27703

USA Tel: +1.919.313.5300

www.cree.com/xlamp

the Cree logo are registered trademarks of Cree, Inc.

Cree, Inc.

4600 Silicon Drive

Durham, NC 27703

USA Tel: +1.919.313.5300

APPLICATIONS

• Channel Letter

• Architectural Lighting

PRODUCT DESCRIPTION

SMD LEDs is packaged in the industry

standard package. These LEDs have

high reliability performance and are

designed to work under a wide

range of environmental conditions.

This high reliability feature makes

them ideally suited to be used under

Architectural lighting application

conditions

These LEDs are suited for channel

letter,or Architectural lighting

applications. Cree has been

certied in accordance with ISO/

TS16949.

of Cree, Inc.

Cree PLCC4 1 in 1 SMD LED

CLM2D-RCC/ACC

ABSOLUTE MAXIMUM RATINGS (TA = 25°C)

Items Symbol Absolute Maximum Rating Unit

Red Amber

Forward Current IF70 mA

Peak Forward Current Note IFP 200 mA

Reverse Voltage VR5V

Power Dissipation PD182 mW

Operation Temperature Topr -40 ~ +100 °C

Storage Temperature Tstg -40 ~ +100 °C

Junction Temperature TJ110 °C

Junction/Ambient RTHJA 250 °C/W

Junction/Solder Point RTHJS 100 °C/W

Electrostatic Discharge

Classication(MIL-STD-883E) ESD Class 2

Note: Pulse width ≤0.1 msec, duty ≤1/10.

TYPICAL ELECTRICAL & OPTICAL CHARACTERISTICS (TA = 25°C)

Characteristics Color Symbol Condition Unit Minimum Typical Maximum

Forward Voltage

Red VFIF = 20 mA V 2.0 2.6

Amber VFIF = 20 mA V 2.1 2.6

Reverse Current Red/Amber IRVR = 5 V μA 10

Dominant Wavelength Red λDIF = 20 mA nm 619 621 624

Amber λDIF = 20 mA nm 584 590 596

Luminous Intensity Red IVIF = 20 mA mcd 2800 5000

Amber IVIF = 20 mA mcd 2800 5200

Note: Continuous reverse voltage can cause LED damage.

of Cree, Inc.

Cree PLCC4 1 in 1 SMD LED

CLM2D-RCC/ACC

COLOR BIN LIMIT (IF = 20 mA)

Tolerance of measurement of luminous intensity is ±10%.

Red

Bin Code Min.

(mcd)

Max.

(mcd)

Ya 2800 3550

Yb 3550 4500

Z0 4500 5600

A0 5600 7100

B0 7100 9000

Red

Bin Code Min.

(nm)

Max.

(nm)

RB 619 624

Tolerance of measurement of dominant wavelength is ±1 nm.

INTENSITY BIN LIMIT (IF = 20 mA)

Amber

Bin Code Min.

(nm)

Max.

(nm)

A2 584 587

A3 587 590

A4 590 593

A5 593 596

Amber

Bin Code Min.

(mcd)

Max.

(mcd)

Ya 2800 3550

Yb 3550 4500

Z0 4500 5600

A0 5600 7100

B0 7100 9000

of Cree, Inc.

Cree PLCC4 1 in 1 SMD LED

CLM2D-RCC/ACC

ORDER CODE TABLE*

Color Kit Number Luminous Intensity (mcd) Dominant Wavelength Package

Min. Max. Color Bin Min.(nm) Color Bin Max.(nm)

Red CLM2D-RCC-CYaB0BB3 2800 9000 RB 619 RB 624 Reel

Red CLM2D-RCC-CYbB0BB3 3550 9000 RB 619 RB 624 Reel

Red CLM2D-RCC-CZ0B0BB3 4500 9000 RB 619 RB 624 Reel

Color Kit Number Luminous Intensity (mcd) Dominant Wavelength Package

Min. Max. Color Bin Min.(nm) Color Bin Max.(nm)

Amber CLM2D-ACC-CYaB0253 2800 9000 A2 584 A5 596 Reel

Amber CLM2D-ACC-CYbB0253 3550 9000 A2 584 A5 596 Reel

Amber CLM2D-ACC-CZ0B0343 4500 9000 A3 587 A4 593 Reel

Notes:

1. The above kit numbers represent order codes that include multiple intensity-bin and color-bin codes. Only one

intensity-bin code and one color-bin code will be shipped on each bulk. Single intensity-bin code and single color-bin

codes will not be orderable.

2. Please refer to the “Cree LED Lamp Reliability Test Standards” document #1 for reliability test conditions.

3. Please refer to the “Cree LED Lamp Soldering & Handling” document #2 for information about how to use this LED

product safely.

#1: Refer to http://www.cree.com/led-components/media/documents/LED_Lamp_Reliability_Test_Standard.pdf

#2: Refer to http://www.cree.com/led-components/media/documents/sh-HB.pdf

of Cree, Inc.

Cree PLCC4 1 in 1 SMD LED

CLM2D-RCC/ACC

GRAPHS

The above data are collected from statistical gures that do not necessarily correspond to the actual

parameters of each single LED. Hence, these data will be changed without further notice.











    





























   





















  

















 



































  

























 



























 

   





of Cree, Inc.

Cree PLCC4 1 in 1 SMD LED

CLM2D-RCC/ACC

MECHANICAL DIMENSIONS

All dimensions are in mm.

NOTES

RoHS Compliance

The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or other-

wise restricted materials in this product are below the maximum concentration values (also referred to as the threshold

limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/

EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as

amended through April 21, 2006.

Vision Advisory Claim

Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye.

of Cree, Inc.

Cree PLCC4 1 in 1 SMD LED

CLM2D-RCC/ACC

KIT NUMBER SYSTEM

Cree LED lamps are tested and sorted into performance bins. A bin is specied by ranges of color, forward voltage, and

brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED Lamp

Packaging Standard” document for more information about shipping and packaging options.

Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are congured in the following man-

ner:

of Cree, Inc.

Cree PLCC4 1 in 1 SMD LED

CLM2D-RCC/ACC

REFLOW SOLDERING

• The CLM2D-RCC/ACC is rated as a MSL 5a product.

• Therecommendedoorlifeoutofbagis24hrs.

• Thetemperatureproleisasbelow.

Use only with CLM2D-RCC/ACC

Solder

Average ramp-up rate = 4ºC/s max

Preheat temperature = 150ºC ~200ºC

Preheat time = 120s max

Ramp-down rate = 6ºC/s max

Peak temperature = 235ºC max

Time within 5ºC of actual Peak Temperature = 10s max

Duration above 217ºC is 45s max

Document

No.:

COTCO

-05-0057

Rev

. NO. : 13

Melting-point

Pre-heat Soak Reflow Cooling

Time

Temperature

Use all SMD besides LP6-NPP1-01-N1

Solder = Sn63-Pb37 Solder = Lead-free

Average ramp-up rate =4ºC/s max. Average ramp-up rate =4ºC/s max

Preheat temperature = 100ºC ~150ºC Preheat temperature = 150ºC ~200ºC

Preheat time = 100s max. Preheat time = 100s max.

Ramp-down rate = 6ºC/s max. Ramp-down rate = 6ºC/s max.

Peak temperature = 230ºC max. Peak temperature = 250ºC max.

Time within 5ºC of actual Peak Temperature = 10s max. Time within 5ºC of actual Peak Temperature = 10s max.

Duration above 183ºC is 80s max. Duration above 217ºC is 80s max.

Only use LP6-NPP1-01-N1 [13]

Solder = Low Lead-free

Average ramp-up rate = 3ºC/s max.

Preheat temperature = 130ºC ~170ºC

Preheat time = 120s max.

Ramp-down rate = 6ºC/s max.

Peak temperature = 213ºC max.

Time within 3ºC of actual Peak Temperature = 25s max.

Duration above 200ºC is 40s max.

Recommended solder pad design for heat dissipation (2-pin SMD LED):

0.5

7.5

7.0

4.5

2.6

1.5

Recommended solder pad design for heat dissipation (4-pin SMD LED)

Referto"http://www.cree.com/led-components/media/documents/sh-HB.pdf"forsoldering&handlingdetails.

of Cree, Inc.

Cree PLCC4 1 in 1 SMD LED

CLM2D-RCC/ACC

NOTES

• The packaging sizes of these SMD products are very small and the resin is still soft after solidication. Users are

required to handle with care. Never touch the resin surface of SMD products.

• To avoid damaging the product’s surface and interior device, it is recommended to choose a special nozzle to pick

up the SMD products during the process of SMT production. If handling is necessary, take special care when picking

up these products. The following method is necessary:

Document No.:

CREE-05-0057

Rev. NO. :

9/9

pickupSMDproductsduringtheprocessofSMTproduction.Ifhandlingisnecessary,itshouldtakemore

careful to pick up these products.Thefollowingtwomethodsarenecessary :

Fig.1a: For Small Top SMD Fig.1b: For Mini side 0.8mm SMD

 ForSmallTopSMDseries,itisrecommendedtouserubbermaterialNozzletopickupSMDproducts.Two

figuresize for reference :

a.) Circular Nozzle: inner diameter: Ø1.8mm+/-0.05mm, outer diameter: Ø2.3mm+/-0.05mm.

b.)Rectangle Nozzle: innersize:1.3mm x 2.3mm,outer size > SMDsize.

6. Electrostatic Discharge and Surge current

 Electrostaticdischarge (ESD) orsurgecurrent(EOS) maydamageSMD LED.

 PrecautionssuchasESDwriststrap,ESDshoestraporantistaticglovesmustbewornwheneverhandlingofSMD LED.

 Alldevices,equipmentandmachinerymustbeproperlygrounded.

 Itisrecommendedto perform electrical test to screen out ESD failures at final inspection.

 Itisimportanttoeliminatethepossibilityofsurgecurrentduringcircuitrydesign

7. Heat Management

HeatmanagementofSMD LEDmustbetakenintoconsiderationduringthedesignstageof SMD LED application. The

current should be de-ratedappropriatelybyreferringtothede-ratingcurveattachedoneachproductspecification.

Dataissubjecttochangewithoutpriornotice.

of Cree, Inc.

Cree PLCC4 1 in 1 SMD LED

CLM2D-RCC/ACC

PACKAGING

• The boxes are not water resistant and they must be kept away from water and moisture.

• The LEDs are packed in cardboard boxes after packaging in normal or anti-electrostatic bags.

• Cardboard boxes will be used to protect the LEDs from mechanical shocks during transportation.

• The reel pack is applied in SMD LED.

• Max 2300 pcs per reel.

  

  



  

  



  