NP2RX-ULTIMATE - NEUTRIK - Product.Network

Plugs & Jacks

setting standards

Plugs & Jacks Plugs & Jacks

Content Page

Plugs:

1/4" Phone Plug - PX Series ........................................ 48

1/4" Phone Plug - crystalCON ..................................... 49

1/4" Phone Plug - jumboPLUG .................................... 49

1/4" Phone Plug - silentPLUG ..................................... 50

1/4" Phone Plug - timbrePLUG ................................... 51

1/4" Phone Plug - ultimatePLUG ................................. 52

1/4" Phone Plugs - C Series ........................................ 53

MIL / B-Gauge Type Phone Plugs ................................. 53

0.173" Bantam Type Miniature Plugs .......................... 54

3.5 mm Right-Angle Stereo Plug ................................. 54

Technical Data ........................................................... 55

Ordering Information ................................................. 56

Accessories ................................................................ 58

Jacks:

Locking 1/4" Cable Jacks ........................................... 59

Locking 1/4" Chassis Jacks ......................................... 60

1/4" Vertical Jacks ..................................................... 61

M Jacks ..................................................................... 62

Slim Jacks .................................................................. 63

Stacking Jacks ............................................................ 64

Technical Data ........................................................... 65

Ordering Information ................................................. 66

Accessories ................................................................ 67

Phono (RCA):

Profi - RCA Serie ........................................................ 68

Phono Socket ............................................................. 68

Technical Data ............................................................ 69

Ordering Information ................................................. 69

Accessories ................................................................ 69

Inline Adapter:

plug2PLUG ................................................................. 70

Ordering Information .................................................. 70

NEUTRIK®, crystalCON®, etherCON®, maxCON®, miniCON®,

nanoCON®, neutriCON®, opticalCON®, powerCON®, Profi®,

rearTWIST®, silentPLUG®, speakON®, DIWA® ,XIRIUM®, are

registered trademarks of Neutrik AG.

www.neutrik.com 47

Plugs & Jacks Plugs & Jacks

Introduction

The Neutrik® plug and jack program offers a wide range

of professional phone connectors including 1/4", 3.5 mm,

MIL/B-gauge style and TT or bantam style plugs. The jack

range offers an exceptional "slim" 1/4" PCB jack that is

almost 20 % smaller than most other designs. The heavy

duty M line combines a wide range of options such as three

different nose forms and four styles of contacts including 3

PCB and one solder tab. It also includes a 1/4" chassis and

cable jack line with the secure locking feature, well known

from the XLR range. All jacks are manufactured from strong

high-grade thermoplastics and are available in all common

versions which make them suitable for audio and indus-

trial applications.

The plug line features:

• Mono (TS) and Stereo (TRS) plugs

• Straight and right-angle versions

• Rugged diecast shell in nickel or black chromium

• Nickel or gold plated contacts

• Chuck type strain relief

• Precision machined plugfinger without rivets

• Coloured boots and rings for coding

• Silent Plug , timbrePLUG and ultimatePLUG for instrument

(guitar) applications

All plugs and jacks are specified to IEC 60603-11 and

EIA RS-453 or the respective MIL standard.

Neutrik® also offers a special jack version which is a combined

3 pole XLR receptacle and a 1/4" phone jack for balanced

mic or line inputs in one XLR shell. This "one for two" panel

mount offers substantial cost, labour and material savings.

For more information on the Combo products see page 36

and 37 or visit our website at www.neutrik.com.

setting standards

NP2X NP2RX

NP2X NP3X-B NP2X-WT NP3RX-B

Plugs Plugs

1/4" Phone Plug - PX and PRX Series

• Slim 1/4" plug with million fold proven chuck type strain relief

• Precision machined one piece contacts – no rivets

• Sleek attractive design for best handling convenience

• 14.5 mm only in diameter (right angle 15.4 mm) – serves highest packing density of 15.88 mm jack pitch

• Nickel or gold plugfinger in mono (TS) and stereo (TRS)

• Screwless assembly (PRX series as well)

• L-D version available which accommodates cable O.D.s up to 8 mm

15.88 mm jack pitch:

Neutrik brand Anti-kink bushing Chuck type strain

relief

White painted

housing

Right angle plug

www.neutrik.com 49

NP2X-B-CRYSTAL NP2XL

NP2X-B-CRYSTAL NP3XL

jumboPLUGcrystalCON

Plugs Plugs

Robust metal

housing

Big bushing for

cable up to 10 mm

crystalCON jumboPLUG

• Mono 1/4" phone plug embellished with CRYSTALLIZEDTM –

Swarovski Elements

• Fancy, noble, valuable, attractive package – an eye-catcher

• 2 or 3 pole 1/4" professional phone plug

• Up to 10 mm cable O.D.

• Robust diecast shell in stylish design

• Proven chuck type strain relief for reliable cable retention

• Ergonomic design for best handling convenience

• Precision machined one piece contacts – avoid hook up of

tip contact

CRYSTALLIZEDTM –

Swarovski Elements

setting standards

NP2X-AU-SILENT

NP2X-AU-SILENT NP2RX-AU-SILENT

silentPLUG

Plugs Plugs

silentPLUG – 1/4" Phone Plug

• Avoids pops and squeals

• Hermetically sealed switching contacts

• Lifetime beyond 10'000 mating cycles

• Slim right-angle plug with industry proven and

reliable chuck type cable strain relief

• Sleek attractive design for convenient handling

and connections

• Rubber overlay on straight housing for best

shock-protection and reliability

• L-D version available accommodating up to 8 mm

Attention!

For use with instrument (guitar) applications

only. Damage may occur if connected to

amplifier output.

Detail Silent Switch:

Gold plated

contacts

Hermetically sealed

Moving magnet

REED SWITCH

• Cannot corrode or pollute

• No wear, constant contact resistance

• Decoupled from switching mechanism

Moving magnet Right angle plug

Design Criteria

The silentPLUG automatically mutes (shorts) an instrument (guitar)

cable to avoid pops and squeals when changing the instrument

(guitar) under load.

The integrated silent switch (pat. pending) is based on REED-

technology and guarantees a lifetime beyond 10'000 mating cycles.

The PX silentPLUG features a rugged metal shell enhanced with a

rubber cushion overlay for improved shock protection.

www.neutrik.com 51

NP2RX-TIMBRE

timbrePLUG

Plugs Plugs

• Standard timbre of your cable plus 3 additional sound

characteristics

• Slim right-angle plug with industry proven and reliable

chuck type cable strain relief

• Sleek attractive design for convenient handling

• Gold plug finger, precision machined one piece contacts

Rotary knob to

change the timbre

Right angle plug

Design Criteria

The characteristic sound of a guitar is not only influenced

by the guitar (strings, pickups, body) alone but also by the

attached instrument cable and the following guitar amp.

The timbrePLUG provides the possibility to change the tim-

bre of your guitar sound from neutral, clear sound to warm

characteristics.

timbrePLUG - characteristic

timbrePLUG – 1/4" Guitar Plug

setting standards

NP2RX-ULTIMATE

ultimatePLUG

Plugs Plugs

• 2 in 1 – combines timbrePLUG & silentPLUG

• Change of timbre and avoiding of pop and squeals are combined in one plug

• The ultimate guitar plug

• Slim right-angle plug with industry proven and reliable chuck type cable strain relief

• Sleek attractive design for convenient handling

• Gold plug finger, precision machined one piece contacts

Details of silentPLUG on page 50 and timbrePLUG charakteristics on page 51.

Rotary knob to

change the timbre

Right angle plug Moving magnet

ultimatePLUG – 1/4" Guitar Plug

Attention!

For use with instrument (guitar)

applications only. Damage may

occur if connected to amplifier

output.

www.neutrik.com 53

NP3C NP3TB-B

NP3CM-B

NP2C + BSP-3 NP3TB-R NP3CM-B

Plugs Plugs

The standard of professional

phone plugs

B-Gauge type

• Available in mono (TS) or stereo (TRS)

• Meets EIA / IEC standards

• Unique plug finger design without rivets

• Sturdy diecast metal shell

• Excellent Neutrik® chuck type strain relief

• 1/4" "B-Gauge" and "MIL" Type Plugs

• All metal design, chuck type strain relief, no rivets

• Meet all prevailing standards

• Available as plug fingers only for overmolding

C Series MIL/B-Gauge Type Plugs

setting standards

NP3TT-1-B NP3TT-2 NTP3RC NTP3RC-B

NP3TT-1

NP3TT-P

NTP3RC

Plugs Technical Data

0.173" Bantam Type Miniature Plugs 3.5 mm Right-Angle Stereo Plug

• Very robust ergonomic design

• Gold contact version in combination with the NJ3TTA jack

eliminates contact problems due to corrosion or dirt

• The single plug NP3TT-P and the dual bantam plug NP3TT-2

are made for assembling with a standard HEX crimping

tool as used with coax cables

• Solder termination for T + R, crimp termination for sleeve

contact

• The only available 3.5 mm plug with chuck type strain relief

• All metal housing – reliable and robust

• Easy to assemble, simple to use

• Slim design – space saving

• Excellent cable protection

• All nickel or black housing, available with gold plated

contacts

Bantam plug Dual bantam plug Gold plated

contacts

Easy connector

assembly

www.neutrik.com 55

Plugs Technical Data

Specifications

1/4" Phone Plugs MIL / B-Gauge Type 0.173" Bantam Type 3.5 mm Stereo Plugs

SILENT & CRYSTAL

timbrePLUG & ultimatePLUG

jumboPLUG

Electrical

Mechanical

Environmental

Materials

Rated current: depends on mating connector    

Contact resistance: depends on mating connector    

Insulation resistance: - initial: > 2 GΩ    

- after damp heat test: ≥ 1 GΩ    

> 0.1 GΩ ULTIMATE + TIMBRE   

Dielectric strength 1 kV dc  - - -

200 V dc SILENT - - -

100 V dc ULTIMATE + TIMBRE - - -

Shell: Zinc diecast Brass Brass (CuZn39Pb3) Zinc diecast

(ZnAl4Cu1) Ni or (CuZn39Pb3) 2 µm Ni (Su) plated (ZnAl4Cu1) Ni or

black Cr plated black or red coated PA 6 30 % GR black Cr plated

Insulation: Polyamide (PA 6.6 30% GR)    PA 6.6 15% GR

Contacts: Brass (CuZn39Pb3)    (Tip: CuSn6) 

2 µm Ni (Su) or Au plated   or Brass 2 µm TRIBOR® (NiP-AuCo) 

Chuck: POM POM - POM

Bushing: POM + PU - - CuZn39Pb3 + PU

(Ni or black Chrome)

Rubber shell-overlay: EPDM - - -

Lifetime > 1'000 mating cycles    

Wiring: solder terminals    

Wire size mm2 1 1 (NP3CM: 0.5) 0.25 0.22

AWG 18 18 (NP3CM: 20) 24 24

Cable O.D.: mm 4 – 7 (≤10: NP*XL) 4 – 7 4 – 4.8 2 – 4.5

Temperature range: -20 °C to +65 °C    

Solderability complies with IEC 68-2-20    

setting standards

Ordering Information Ordering Information

NP2X NP2RX Nickel Nickel IEC 60603-11 / EIA RS-453 Mono plug, black bushing

NP2X-BAG NP2RX-BAG Black Cr Nickel  Mono plug, black bushing

NP2X-B NP2RX-B Black Cr Gold  Mono plug, black bushing

NP2X-WT - White painted Nickel  Mono plug, white bushing

NP3X NP3RX Nickel Nickel  Stereo plug, black bushing

NP3X-BAG NP3RX-BAG Black Cr Nickel  Stereo plug, black bushing

NP3X-B NP3RX-B Black Cr Gold  Stereo plug, black bushing

*-D *-D Bulk packed to be ordered in multiples of 100

NP2XL Nickel Nickel IEC 60603-11 / EIA RS-453 Mono plug, black bushing

NP3XL Nickel Nickel  Stereo plug, black bushing

NP2C Nickel Nickel IEC 60603-11 / EIA RS-453 Mono plug, black bushing

NP2C-BAG Black Cr Nickel  Mono plug, black bushing

NP2C/B Black Cr Gold  Mono plug, black bushing and gold contacts

NP3C Nickel Nickel  Stereo plug, black bushing

NP3C-BAG Black Cr Nickel  Stereo plug, black bushing

NP3C/B Black Cr Gold  Stereo plug, black bushing and gold contacts

NP2C-BAG-T-AU Black Cr Nickel + T: Gold  Mono plug, black bushing with gold tip

NP2C-T10AA Nickel Nickel  Mono plug, red bushing, with built-in 1:10 transformer

to convert microphone levels to guitar inputs

NP2RCS Nickel +

black plastic Nickel  Mono right-angle plug, black bushing

NP3RCS Nickel +

black plastic Nickel  Stereo right-angle plug, black bushing

NP*C-D Bulk packed to be ordered in multiples of 100

1/4" Professional Phone Plugs - PC Series

silentPLUG - special Guitar Plug

timbrePLUG - special Guitar Plug

ultimatePLUG - special Guitar Plug

1/4" Professional Phone Plugs - PX and PRX Series

jumboPLUG - 1/4'' plug for thick instrument and loudspeaker cables

NP2X-AU-SILENT Rubber overlay Gold IEC 60603-11 / EIA RS-453 Mono plug, silent switch

NP2RX-AU-SILENT red coated Gold IEC 60603-11 / EIA RS-453 Right angle mono plug, silent switch

NP2RX-TIMBRE red coated Gold IEC 60603-11 / EIA RS-453 Right angle mono plug, timbre switch

NP2RX-ULTIMATE Black Cr Gold IEC 60603-11 / EIA RS-453 Right angle mono plug, timbre switch & silent switch

Ordering Information

Part Number Shell Contacts Standards Remarks

Compatibility

crystalCON - 1/4" Professional Phone Plug

NP2X-B-CRYSTAL Black Cr Gold IEC 60603-11 / EIA RS-453 Mono plug, black bushing, equipped with CRYSTALLIZEDTM

–

Swarovski Elements

www.neutrik.com 57

Ordering Information Ordering Information

NP3TB-B Black Nickel B-GAUGE BP0316 1/4" B-Gauge plug

NP3TB-R Red Nickel

 1/4" B-Gauge plug

NP3TM-B Black Nickel MIL-P-642/2 1/4" MIL plug

NP3TM-R Red Nickel

 1/4" MIL plug

NP2CM-B Black Brass MIL-P-642/4 Mono 1/4" MIL plug

NP2CM-R Red Brass  Mono 1/4" MIL plug

NP3CM-B Black Brass MIL-P642/5A Stereo 5.23 mm (0.206") MIL plug

NP3CM-R Red Brass  Stereo 5.23 mm (0.206") MIL plug

MIL/B-gauge Type Phone Plugs

Ordering Information

Part Number Shell Contacts Standards Remarks

Compatibility

NP3TT-1-B Nickel + black plastic Nickel MIL-P-642/13 4.4 mm (0.173") Bantam plug with solder contacts, black sleeve

NP3TT-1-R Nickel + red plastic Nickel  4.4 mm (0.173") Bantam plug with solder contacts, red sleeve

NP3TT-AU-B Nickel + black plastic Gold  4.4 mm (0.173") Bantam plug with solder contacts, black sleeve

NP3TT-AU-R Nickel + red plastic Gold  4.4 mm (0.173") Bantam plug with solder contacts, red sleeve

NP3TT-P-B Black plastic Nickel  4.4 mm (0.173") Bantam plug with solder contacts, black sleeve

NP3TT-P-R Red plastic Nickel  4.4 mm (0.173") Bantam plug with solder contacts, red sleeve

NP3TT-P-AU-B Black plastic Gold  4.4 mm (0.173") Bantam plug with solder contacts, black sleeve

NP3TT-P-AU-R Red plastic Gold  4.4 mm (0.173") Bantam plug with solder contacts, red sleeve

NP3TT-2 Black plastic Nickel  4.4 mm (0.173") Twin Bantam plug with solder contacts, black sleeve

NTP3RC Nickel Nickel IEC 60603-11 3.5 mm audio plug with chuck and bushing

NTP3RC-B Black Cr Gold IEC 60603-11 3.5 mm audio plug with chuck and bushing

0.173" Bantam Type Miniature Plugs

3.5 mm Right-Angle Stereo Plug

setting standards

BSP-*

HX-TT-1 HX-R-BNC HX-R-BNC-PJ HTXP HTPXS

BSTT-* BSTP-* PCR-*

BPX-* PXR-*

Ordering Information Locking Jacks

Accessories

BSP-* Colored bushing for NP*C Series

BPX-* Colored bushing for NP*X Series

BPX-L Large bushing for NP*X Series up to 8.0 mm cable O.D.

BSTT-* Colored sleeves for NP3TT Series

BSTP-* Colored sleeves for NP3TT-P Series

PXR-* Colored marking rings for NP*X Series

PCR-* Colored marking rings for NP*C Series

*: Must be ordered in multiples of 100. Black Brown Red Orange Yellow Green Blue Violet Grey White

0 1 2 3 4 5 6 7 8 9

Assembly tool

HX-TT-1 Assembly and crimp tool for NP3TT-1/AU

HX-R-BNC HEX crimp tool for NP3TT-P*

DIE-R-BNC-PJ HEX crimp die for NP3TT-P* (5.4 mm)

HTXP Hand tool to tighten the PX and XX-bushing

HTPXS Hand tool to hold shell of PX Plug

www.neutrik.com 59

NJ3FC6 NJ3FC6-BAG

NJ3FC6

Ordering Information Locking Jacks

• Securely locking cable jack

• Mates with all mono or stereo plugs specified to EIA RS-453

• Extremely robust and reliable

• Excellent Neutrik cable retention

• Colored boots available in 10 colors

• For cable O.D.s up to 8 mm

Locking 1/4" Cable Jacks

1/4" cable jack with

locking

Neutrik cable retention

setting standards

NJ3FP6C

NJ3FP6C-BAGNJ3FP6C

Locking Jacks Vertical PCB Jacks

• Mates with all mono or stereo plugs specified to EIA RS-453

• Dimensionally compatible with D Series (31 x 26 mm)

• Securely locking chassis jack

• Solder terminals

• Special version with black plastic shell

• Choice of grounding option (see on www.neutrik.com)

Locking 1/4" Chassis Jacks

Release latch Standard D mounting

dimensions

www.neutrik.com 61

NJ*FD-V

*: 2, 3, 5, 6

NJ6TB-V

Locking Jacks Vertical PCB Jacks

1/4" Vertical Jacks

• Neutrik 1/4" Vertical PCB Jacks come in either standard

1/4" (FD) or mil gauge (TB) versions

• They feature a snap on/twist off cap which drastically

reduces assembly times

• Retention force is provided by a special spring element

independent of the contacts which results in optimal

contact force with minimal contact wear

• Gold plated contact area for long durability and reliable,

corrosion free operation

• High packing density compact design allows for more jacks

in less space

• Available in Stereo switching and non-switching versions,

and Mono non-switching version

• More than 10'000 insertion / withdrawal cycles

Snapping cap Solder tags

setting standards

NMJ6HHD2

NMJ4HC-S

NMJ6HFD2NRJ-NUT-B

NMJ4HHD2 NMJ2HC-S NMJ6HFD2

Horizontal PCB Jacks Horizontal PCB Jacks

M Jacks

• Wide body and extremely durable contacts

• Available in all common versions:

- mono

- stereo

- switched

- unswitched

• Hardwire and PCB version

• Nose type in

- half threaded

- fully threaded

- chrome ferrule

• Full threaded and chrome nose M Jacks are supplied with

washer and fixing nut

• Mounting hardware for half threaded nose must be ordered

separatly

• Fascia appearance in plastic or chrome

Half threaded nose Chrome ferrule Plastic nut

NRJ-WB (washer)

www.neutrik.com 63

NRJ4HH-1 NRJ6HF-1 NRJ6HM-1

NRJ4HH-1 NRJ4HF-1 NRJ6HM-1

NRJ-NUT-MK NRJ-NUT-MSNRJ-NUT-B

NRJ-NUT-B NRJ-NUT-MK

NRJ-NUT-MS

Horizontal PCB Jacks Horizontal PCB Jacks

Slim Jacks

• High board packing density

• Nose type in

- half thread

- fully threaded

- metal

• *-1 versions meet the requirements of EMC rules through

efficient chassis grounding system

• Retention spring ensures optimal grip on inserted

plugs, avoiding the chance of lost connection

• All Slim line jacks have PCB horizontal mount pins

• Mounting nuts in different versions available – must be

ordered separatly

Half threaded nose Chrome nose Chassis ground

contact

Gold plated contacts

NRJ-NUT-MN

(Metal Nose only)

NRJ-NUT-MN

(Only compatible with metal nose).

Thread pitch is a 3/8" 32 UNEF 2A.

setting standards

NSJ8HC NSJ12HL

NSJ8HC

NSJ12HH-1

NSJ12HL

NSJ12HF-1

NSJ12HH-1 NSJ12HF-1

NSJ-NUT-B

Tuerca “quick fix” de

montaje rápido

NRJ-NUT-B

PCB Mount Stacking Jacks

Stacking Jacks

• Mono and stereo dual slim jack socket for PCB mounting

with switch contacts

• Mounting method by either two quick fix or threaded

nuts or one single center screw

• Highest board packing density as two jacks are in a single

footprint, fit in 1 RU

• Version with fully and half threaded nose, full nose, quick-fit

and plane

Plane nose Quick fix nose Quick fix nut Fully threaded nose

www.neutrik.com 65

Technical Data

Specifications Vertical Locking

M Jack

Slim Jack

Stacking

Jack Cable & Chassis Jack

Jack

Contact resistance - initial < 10 mΩ < 6 mΩ < 15 mΩ < 10 mΩ -

- Top row - - - -

< 15 mΩ

- Bottom row - - - -

< 10 mΩ

Switch contact resistance - for silver - -

< 30 mΩ < 25 mΩ -

- for gold < 15 mΩ - - < 10 mΩ -

- Top row - - - -

< 15 mΩ

- Bottom row - - - -

< 10 mΩ

Insulation resistance ≥ 1GΩ @ 500 V dc     

Dielectric strength 1 kV dc     

Rated current 3 A 10 A 3 A 3 A 3 A

Rated switch contact current 0.25 A @ 12 V - 0.5 A @ 50 V 0.5 A @ 50 V 0.5 A @ 50 V

Lifetime > 10`000 cycles     

Insertion / withdrawal force < 20 N / > 8 N < 30 N / > 20 N < 30 N / > 10 N < 30 N / > 10 N < 30 N / > 10 N

Cap opening torque 25 N cm / 9.84 N in - - - -

Locking force - > 80 N - - -

Wire size - 1 mm2 / 18 AWG  - - -

Cable O.D. (FC6 only) - 3.5 - 8.0 mm - - -

Panel thickness 1.2 - 1.5 mm [0.047 - 0.06"] - - - -

- Full nose type - -

< 3.0 mm < 3.0 mm -

- Half nose type - -

< 1.0 mm < 1.0 mm -

- Chrome nose - -

< 4.7 mm - -

- NSJ*HL - - - - 1.0 - 1.6 mm

- NSJ*HC - - - -

> 1.0 mm

Solderability complies with IEC 68-2-20     

Standard Compatibility

EIA RS 453 + IEC 60603-11 NJ*FD    

B-GAUGE BPO 316, MIL-J-641/3 NJ*TB - - - -

Temperature range -25 °C to +70 °C     

Shell / Handle PA 6.6 30% GR ZnAI4Cu1 PA 6.6 15% GR PA 6 15% GR PA 6 15% GR

Ni or black

- FP6P - PA 6.6 30% GR - - -

Insulation - PA 6.6 30% GR -

Contacts CuSn6 CuBe2/CuZn37 (ground) CuSn6 CuSn6 CuSn6

Contact surface 0.2 µm Au 2 µm Ag gal 2 µm Ag / 0.2 µm Au gal 2 µm Ag / 0.2 µm Au gal 2 µm Ag

Cap / Nut / Washer POM - PA 6.6 15% GR PA 6.6 15% GR PA 6.6 15% GR

Ring Nut - - - Brass (Ni plated) Brass (Ni plated)

Chuck - POM - - -

Bushing - PA 6.6 15% GR + PUR - - -

... max. for soldering tag

Electrical

Mechanical

Environmental

Material

Circuits:

Mono unswitched Mono switched Stereo unswitched 2x switching 3x switching

(normalling) Stereo (normalling) Stereo

N*J2** N*J4** N*J3** N*J5** N*J6**

EXCEPTION: NRJ*HM-1-PRE & NRJ*HH(F)-1 ..... Sleeve not switched

setting standards

Ordering Information

Part Number Shell Contacts

Terminations Standards Remarks

Compatibility

PCB Mount Sockets - Switched

NRJ3HF-1 Black/Plastic Silver Horizontal PCB mount IEC 60603-11/EIA RS 453 Stereo, full threaded nose, chassis ground contact

NRJ4HF     Mono, full threaded nose

NRJ4HF-1     Mono, full threaded nose, chassis ground contact

NRJ6HF     Stereo, full threaded nose

NRJ6HF-1     Stereo, full threaded nose, chassis ground contact

NRJ4HH     Mono, half threaded nose

NRJ4HH-1     Mono, half threaded nose, chassis ground contact

NRJ6HH     Stereo, half threaded nose

NRJ6HH-1     Stereo, half threaded nose, chassis ground contact

NRJ6HF-AU  Gold   Stereo, full threaded nose, gold plated contacts

NRJ6HF-1-AU  Gold   Stereo, full threaded nose, chassis ground contact,

gold plated contacts

NRJ6HH-AU  Gold   Stereo, half threaded nose, gold plated contacts

NRJ-NUT-B  - - - Hexagonal black plastic nut

NRJ-NUT-R Red/Plastic - - - Hexagonal red plastic nut

NRJ-NUT-MK Metal/Ni plated - - - Metal ring nut, knurled

NRJ-NUT-MS Metal/Ni plated - - - Metal ring nut

PCB Mount Sockets - Switched with Metal Nose

NRJ6HM-1 Black/Plastic Silver Horizontal PCB mount IEC 60603-11/EIA RS 453 Stereo, metal threaded nose

NRJ6HM-1-AU  Gold   Stereo, metal threaded nose, gold plated contacts

NRJ-NUT-MN Metal - - - Hexogonal metal nut (for metal nose jack only)

NSJ8HL Polyamid PA 6.6 GR Silver Horizontal PCB mount IEC 60603-11/EIA RS 453 Mono, quick fix nose

NSJ12HL     Stereo, quick fix nose

NSJ8HC     Mono, full nose

NSJ12HC     Stereo, full nose

NSJ12HF-1     Full threaded nose

NSJ12HH-1     Half threaded nose

NSJ-NUT-B Black/Plastic - - - Quick fix nut

All Slim jacks are for PCB mount only.

Mounting nuts must be ordered separately, except for Stacking Jack type NSJ8HL and NSJ12HL.

Ordering Key:

NRJ*H NEUTRIK Jack Horizontal * number of contacts:

H half threaded nose 2 mono unswitched

F full threaded nose 4 mono switched

L quick fix nose 6 stereo switched

M metal threaded nose 8 mono stacking jack

C plane nose 12 stereo stacking jack

-1 chassis ground contact

Nose: -H -F -M -L -C

Slim Jack

Stacking Jack

www.neutrik.com 67

Ordering Information

Part Number Shell Contacts Terminations Standards Remarks

Compatibility

1/4" Locking Jack

M Jack

1/4" Vertical Jack

NJ2FD-V Black/Plastic Gold Vertical PCB mount IEC 60603-11/EIA RS 453 Non-switching Mono Jack (T/S)

NJ3FD-V     Non-switching Stereo Jack (T/R/S)

NJ5FD-V     2 x switching (normalling) Stereo jack (T/TN/R/RN/S)

NJ6FD-V     3 x switching (normalling) Stereo jack (T/TN/R/RN/S/SN)

NJ6TB-V    B-Gauge BPO316 Mil-J-641/3 3 x switching (normalling) Stereo jack (T/TN/R/RN/S/SN)

NMJ2HF-S Black/Plastic Silver Horizontal PCB mount IEC 60603-11/EIA RS 453 Mono, unswitched, full threaded nose, solder tags

NMJ3HF-S     Stereo, unswitched, full threaded nose, solder tags

NMJ4HF-S     Mono, switched, full threaded nose, solder tags

NMJ2HC-S     Mono, unswitched, Chrome ferrule, solder tags

NMJ4HC-S     Mono, switched, Chrome ferrule, solder tags

NMJ4HFD2     Mono, switched, full threaded nose, PCB mount

NMJ4HFD3     Mono, switched, full threaded nose, offset PCB mount

NMJ4HCD2     Mono, switched, Chrome ferrule, PCB mount,

NMJ4HHD2     Mono, switched, half threaded nose, PCB mount, without nut and washer

NMJ6HF-S     Stereo, switched, full threaded nose, solder tags

NMJ6HC-S     Stereo, switched, Chrome ferrule, solder tags

NMJ6HCD2     Stereo, switched, Chrome ferrule, PCB mount

NMJ6HHD2     Stereo, switched, half threaded nose, PCB mount, without nut and washer

NMJ6HFD2     Stereo, switched, full threaded nose, PCB mount

NMJ6HFD3     Stereo, switched, full threaded nose, offset PCB mount

NMJ6HCD3     Stereo, switched, Chrome ferrule, offset PCB mount

NMJ6HFD4     Stereo, switched, full threaded nose, tear drop PCB mount

Full threaded and Chrome nose M-Jacks are supplied with fixing nut and washers.

Mounting hardware for half threaded nose must be ordered separately.

Ordering Key: -S -D2

NMJ*H NEUTRIK M Jack Horizontal * number of contacts:

H half threaded nose 2 mono unswitched

F fully threaded nose 3 stereo unswitched

C chrome nose 4 mono switched

-S solder tag 5 stereo switched (T/S) -D3 -D4

D2 PCB pins 02 6 stereo switched (T/R/S)

D3 PCB pins 03

D4 PCB pins 04

NJ 3FC6 Nickel Silver Wire soldering IEC 60603-11/EIA RS 453 Cable Jack

NJ3FC6-BAG Black

   

NJ3FP6C Nickel

   Chassis Jack

NJ3FP6C-B Black Gold   

NJ3FP6C-BAG Black Silver   

NJ3FP6F-P Black/Plastic

 Flat tabs  Plastic Chassis

NJ3FP6P-BAG Black/Plastic

   Plastic Chassis

Accessories

Example Example

NZP1RU-8 Panel 1RU housing with 8 D-shape cutouts

NZP1RU-12 Panel 1RU housing with 12 D-shape cutouts

DSS-* Lettering plate, colored plastic

SCDR Rear end protection cover for locking 1/4"chassis jack

NDJ dummyPLUG for 1/4" chassis jack

SCDX Hinged cover seals locking 1/4 chassis jack, IP42 rated

SCCD-W Spring-loaded cover to seals locking 1/4 chassis jack, IP 65

SCDP-* D-Size sealing gaskets, color coding

(*: 0- black, 2- red, 4- yellow, 5- green, 6- blue, 9- white)

NDJ NZP1RU-12 SCDP-*DSS SCDR SCDX SCCD-W

setting standards

NF2C-B2 NF2D-4

NF2D-B-6

NF2C-B2 NF2D-*

RCA Series

• Makes ground before signal contact and breaks signal

before ground

• No more disturbing noise and broken speaker cones

• Precisely machined to our demanding quality standards

• Neutrik unique chuck type strain relief

• Gold plated contacts

• Sleek barrel with soft touch surface and colored shrink

sleeve

• Improved ground solder lug for ease soldering

• Precisely machined to our demanding quality standards

• Gold plated contacts

*: available in 9 colors see page 69

Profi® RCA Series Phono Socket

Gold plated

contacts

Soft-touch surface Phono socket

www.neutrik.com 69

RCA Series

Specification Profi® Phono Socket

Accessories

Rated current per contact 10 A rms continuous  

Rated insulation voltage 50 V ac  

Insulation resistance > 100 GΩ < 5 GΩ

Dielectric strength 1.5 kV dc 0.5 kV dc

Capacitance (pin to shell) 7 pf 9 pf

Life time (mating cycles) > 2000  

Cable O.D. range 3.0 – 7.3 mm  -

Wiring soldering  

Max. wire size 2.5 m2 / AWG 14  -

Cable anchoring Neutrik® chuck type strain relief  -

Housing Brass (CuZn39Pb3)  -

Zinc diecast (ZnAICu1) - 

Insert PBTP 20% GR  -

Contacts Brass (CuZn39Pb3)  

Contact plating 0.05 µm Au plated over 2 µm Ni  

Chuck Polyacetal (POM)  -

Temperature range -30 °C to +80 °C  

Protection class IP 40  

Flammability UL 94 HB  

Solderability complies with IEC 68-2-20  

Phono (RCA) Socket

NF2D-* Chassis Phono (RCA) socket in D Shape housing

NF2D-B-* Chassis Phono (RCA) socket in black D Shape housing

* color coding: 0 - Black, 1- Brown, 2 - Red, 3 - Orange, 4 - Yellow, 5 - Green, 6 - Blue, 7 - Violet, 8 - Grey, 9 - White

Ordering Information

Phono Profi®

NF2C-B2 Professional "phono Plug" (RCA or CINCH type), two plugs with red and black coding, two strain relief

chucks for a second cable diameter

Electrical

Mechanical

Material

Environment

NDP Dummy plug for phone socket

NZP1RU-8 Panel 1RU housing with 8 D-shape cutouts

NZP1RU-12 Panel 1RU housing with 12 D-shape cutouts

SCL Plastic sealing cover to protect the connector sockets against dust and moisture

SCDP-* D-Size sealing gaskets, colour coding (*: 0- black, 2- red, 4- yellow, 5- green, 6- blue, 9- white)

SCDX Hinged cover seals D-size chassis connectors, IP 42 rated

SCCD-W Spring-loaded cover to seals D-size chassis connectors, IP 65 rated

setting standards

NA2JJ

[2.14“]

[0.70“]

plug2PLUG

Inline Adapter

• The plug2PLUG is a simple yet sophisticated plug adapter

for a quick and easy connection of two mono TS plugs.

plug2PLUG

Simple housing

Application: 1/4" Phone Plug to 1/4" Phone Plug

Ordering Information

plug2PLUG

NA2JJ 2 pole coupler to extend two 2 pole 1/4" Phone Plugs