B78477P1006A114 - EPCOS (TDK)

LAN Modules

Series/Type: B78477P1***A*14

The following products presented in this data sheet are being withdrawn.

Ordering Code Substitute Product Date of

Withdrawal Deadline Last

Orders Last

Shipments

B78477P1007A114 2014-04-25 2014-07-31 2014-10-31

B78477P1006A114 2014-04-25 2014-07-31 2014-10-31

B78477P1005A314 2014-04-25 2014-07-31 2014-10-31

information contained therein without EPCOS' prior express consent is prohibited.

EPCOS AG is a TDK Group Company.

Ordering Code Substitute Product Date of

Withdrawal Deadline Last

Orders Last

Shipments

B78477P1004A314 2014-04-25 2014-07-31 2014-10-31

B78477P1003A014 2014-04-25 2014-07-31 2014-10-31

B78477P1002A014 2014-04-25 2014-07-31 2014-10-31

B78477P1001A314 2014-04-25 2014-07-31 2014-10-31

For further information please contact your nearest EPCOS sales office, which will also support

you in selecting a suitable substitute. The addresses of our worldwide sales network are

presented at www.epcos.com/sales.

Applications

Local Area Networks using Ethernet protocol

Hubs, switches, routers

ADSL modems

Industrial automation equipment using

Ethernet protocol for communication

Features

Fully compliant with IEEE 802.3,

IEEE 802.3af (B78477P1001A314)

With EMI fingers for shielding

High electrical performance and EMI suppression

Optimized for all major transceiver ICs

Industry standard footprint

RoHS-compatible

Construction

Housing: Thermoplastic, UL 94 V-0

Shield: Ni plated on copper alloy

Contact: Phosphor bronze,

1.27 µm (50 µ") Ni underplating,

0.4 µm (15 µ") selective gold plating

Connector dimensions comply with

TIA-968 (FCC 68.5) dimension requirements

Marking

EPCOS, middle block of ordering code, date code

Delivery mode and packing unit

Blister trays in carton box

Packing unit: 512 pcs. per carton box (8 trays),

B78477P1001A314: 640 pcs.

RJ45 Jacks with integrated magnetics B78477P100*A*14

10/100 Base-T, single port, tab down

Page 2 of 12Please read Cautions and warnings and

Important notes at the end of this document.

Overview and ordering codes

Operating temperature range LED (left - right) Ordering code

0°C ... +70 °C Green - yellow B78477P1004A314

Green - yellow B78477P1005A314

Yellow - green B78477P1006A114

Yellow - green B78477P1007A114

B78477P1003A014

40 °C ... +85 °C Green - yellow B78477P1001A314

B78477P1002A014

Mechanical characteristics

Insertion force 20 N max.

Retention force 75 N min.

Durability 750 mating cycles min.

LED specification

LED colour Wave length Forward voltage

Max. Typical

Green 565 nm 2.6 V 2.2 V

Yellow 585 nm 2.6 V 2.1 V

RJ45 Jacks with integrated magnetics B78477P100*A*14

10/100 Base-T, single port, tab down

Page 3 of 12Please read Cautions and warnings and

Important notes at the end of this document.

1) On mass manufacture will be 2 s to HVtest

Characteristics

B78477P1001A314

(electrical specifications at +25 °C)

Turns ratio (primary : secondary) 1.414 : 1 ±3%

Inductance L 350 µH min. 100 kHz, 100 mV,

8 mA DC bias

Voltage test Vtest (primary : secondary) 1500 VRMS 0.5 mA, 50 Hz, 1 min1)

(primary : shield) 1500 VRMS 0.5 mA, 50 Hz, 1 min1)

DCR (1/2 winding) 0.6 Ωmax.

DCR Balance ±0.065 Ωmax. center tap symmetry

Insertion loss 1.2 dB max. 0.1 MHz

Return loss 16 dB min.

10+20log(f/60) dB min.

10 dB min.

0.1 MHz ... 30 MHz

30 MHz ... 60 MHz

60 MHz ... 80 MHz

Crosstalk 50 dB min.

50+17log(f/10) dB min.

1 MHz

10 MHz ... 100 MHz

Common-mode rejection 50 dB typ.

15+17log(f/200) dB typ.

2 MHz

30 MHz ... 200 MHz

Weight Approx. 5.7 g

RJ45 Jacks with integrated magnetics B78477P100*A*14

10/100 Base-T, single port, tab down

Page 4 of 12Please read Cautions and warnings and

Important notes at the end of this document.

Characteristics

B78477P1002A014, B78477P1003A014,

B78477P1004A314, B78477P1006A114,

B78477P1007A114

(electrical specifications at +25 °C)

Turns ratio (primary : secondary) 1CT : 1CT ±3%

Inductance L 350 µH min. 100 kHz, 100 mV,

8 mA DC bias

Voltage test Vtest (primary : secondary) 1500 V AC 50 Hz, 1 min

Insertion loss 1.0 dB max. 1 MHz ... 100 MHz

Return loss 18 dB min.

14 dB min.

12 dB min.

10 dB min.

1 MHz ... 40 MHz

60 MHz

80 MHz

100 MHz

Crosstalk 33 dB min. 1 MHz ... 100 MHz

Common-mode rejection 30 dB typ. 1 MHz ... 100 MHz

Weight Approx. 5.7 g

RJ45 Jacks with integrated magnetics B78477P100*A*14

10/100 Base-T, single port, tab down

Page 5 of 12Please read Cautions and warnings and

Important notes at the end of this document.

Characteristics

B78477P1005A314

(electrical specifications at +25 °C)

Turns ratio (primary : secondary) 1CT : 1 ±3%

Inductance L 350 µH min. 100 kHz, 100 mV,

8 mA DC bias

Voltage test Vtest (primary : secondary) 1500 V AC 50 Hz, 1 min

Insertion loss 1.0 dB max. 1 MHz ... 100 MHz

Return loss 18 dB min.

14 dB min.

12 dB min.

10 dB min.

1 MHz ... 40 MHz

60 MHz

80 MHz

100 MHz

Crosstalk 33 dB min. 1 MHz ... 100 MHz

Common-mode rejection 30 dB typ. 1 MHz ... 100 MHz

Weight Approx. 5.7 g

RJ45 Jacks with integrated magnetics B78477P100*A*14

10/100 Base-T, single port, tab down

Page 6 of 12Please read Cautions and warnings and

Important notes at the end of this document.

Dimensional drawing for B78477P1001A314

Layout recommendation (top view)

Dimensions in mm

Values without tolerances are nominal values for reference.

Pinning

RJ45 Jacks with integrated magnetics B78477P100*A*14

10/100 Base-T, single port, tab down

Page 7 of 12Please read Cautions and warnings and

Important notes at the end of this document.

Dimensional drawing for B78477P1002A014 and B78477P1003A014

Layout recommendation (top view)

Dimensions in mm

Values without tolerances are nominal values for reference.

Pinnings

B78477P1002A014 B78477P1003A014

RJ45 Jacks with integrated magnetics B78477P100*A*14

10/100 Base-T, single port, tab down

Page 8 of 12Please read Cautions and warnings and

Important notes at the end of this document.

Dimensional drawing for B78477P1004A314 and B78477P1005A314

Layout recommendation (top view)

Dimensions in mm

Values without tolerances are nominal values for reference.

Pinnings

B78477P1004A314 B78477P1005A314

RJ45 Jacks with integrated magnetics B78477P100*A*14

10/100 Base-T, single port, tab down

Page 9 of 12Please read Cautions and warnings and

Important notes at the end of this document.

Dimensional drawing for B78477P1006A114 and B78477P1007A114

Layout recommendation (top view)

Dimensions in mm

Values without tolerances are nominal values for reference.

Pinnings

B78477P1006A114 B78477P1007A114

RJ45 Jacks with integrated magnetics B78477P100*A*14

10/100 Base-T, single port, tab down

Page 10 of 12Please read Cautions and warnings and

Important notes at the end of this document.

Cautions and warnings

If the components are to be washed varnished it is necessary to check whether the washing

varnish agent that is used has a negative effect on the wire insulation, any plastics that are

used, or on glued joints. In particular, it is possible for washing varnish agent residues to have a

negative effect in the long-term on wire insulation.

The following points must be observed if the components are potted in customer applications:

– Many potting materials shrink as they harden. They therefore exert a pressure on the plastic

housing or core. This pressure can have a deleterious effect on electrical properties, and in

extreme cases can damage the core or plastic housing mechanically.

– It is necessary to check whether the potting material used attacks or destroys the wire

insulation, plastics or glue.

– The effect of the potting material can change the high-frequency behaviour of the

components.

Ferrites are sensitive to direct impact. This can cause the core material to flake, or lead to

breakage of the core.

Even for customer-specific products, conclusive validation of the component in the circuit can

only be carried out by the customer.

RJ45 Jacks with integrated magnetics B78477P100*A*14

10/100 Base-T, single port, tab down

Page 11 of 12Please read Cautions and warnings and

Important notes at the end of this document.

The following applies to all products named in this publication:

1. Some parts of this publication contain statements about the suitability of our products for

certain areas of application. These statements are based on our knowledge of typical re-

quirements that are often placed on our products in the areas of application concerned. We

nevertheless expressly point out that such statements cannot be regarded as binding

statements about the suitability of our products for a particular customer application.

As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar

with them than the customers themselves. For these reasons, it is always ultimately incum-

bent on the customer to check and decide whether an EPCOS product with the properties de-

scribed in the product specification is suitable for use in a particular customer application.

2. We also point out that in individual cases, a malfunction of electronic components or

failure before the end of their usual service life cannot be completely ruled out in the

current state of the art, even if they are operated as specified. In customer applications

requiring a very high level of operational safety and especially in customer applications in

which the malfunction or failure of an electronic component could endanger human life or

health (e.g. in accident prevention or lifesaving systems), it must therefore be ensured by

means of suitable design of the customer application or other action taken by the customer

(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by

third parties in the event of malfunction or failure of an electronic component.

3. The warnings, cautions and product-specific notes must be observed.

4. In order to satisfy certain technical requirements, some of the products described in this

publication may contain substances subject to restrictions in certain jurisdictions (e.g.

because they are classed as hazardous). Useful information on this will be found in our Ma-

terial Data Sheets on the Internet (www.epcos.com/material). Should you have any more de-

tailed questions, please contact our sales offices.

5. We constantly strive to improve our products. Consequently, the products described in this

publication may change from time to time. The same is true of the corresponding product

specifications. Please check therefore to what extent product descriptions and specifications

contained in this publication are still applicable before or when you place an order. We also

reserve the right to discontinue production and delivery of products. Consequently, we

cannot guarantee that all products named in this publication will always be available. The

aforementioned does not apply in the case of individual agreements deviating from the fore-

going for customer-specific products.

6. Unless otherwise agreed in individual contracts, all orders are subject to the current ver-

sion of the "General Terms of Delivery for Products and Services in the Electrical In-

dustry" published by the German Electrical and Electronics Industry Association

(ZVEI).

7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CSMP, CSSP, CTVS,

DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC,

MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL,

SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse,

WindCap are trademarks registered or pending in Europe and in other countries. Further

information will be found on the Internet at www.epcos.com/trademarks.

Important notes

Page 12 of 12