PD - 95035 IRG4RC10KDPbF INSULATED GATE BIPOLAR TRANSISTOR WITH ULTRAFAST SOFT RECOVERY DIODE Features Short Circuit Rated UltraFast IGBT C * Short Circuit Rated UltraFast: Optimized for high operating frequencies >5.0 kHz , and Short Circuit Rated to 10s @ 125C, VGE = 15V * Generation 4 IGBT design provides tighter parameter distribution and higher efficiency than previous generation * IGBT co-packaged with HEXFREDTM ultrafast, ultra-soft-recovery anti-parallel diodes for use in bridge configurations * Industry standard TO-252AA package * Lead-Free VCES = 600V VCE(on) typ. = 2.39V G @VGE = 15V, IC = 5.0A E n-channel Benefits * Latest generation 4 IGBT's offer highest power density motor controls possible * HEXFREDTM diodes optimized for performance with IGBTs. Minimized recovery characteristics reduce noise, EMI and switching losses * For hints see design tip 97003 D-PAK TO-252AA Absolute Maximum Ratings Parameter VCES IC @ TC = 25C IC @ TC = 100C ICM ILM IF @ TC = 100C IFM tsc VGE PD @ TC = 25C PD @ TC = 100C TJ TSTG Collector-to-Emitter Voltage Continuous Collector Current Continuous Collector Current Pulsed Collector Current Clamped Inductive Load Current Diode Continuous Forward Current Diode Maximum Forward Current Short Circuit Withstand Time Gate-to-Emitter Voltage Maximum Power Dissipation Maximum Power Dissipation Operating Junction and Storage Temperature Range Soldering Temperature, for 10 sec. Max. Units 600 9.0 5.0 18 18 4.0 16 10 20 38 15 -55 to +150 V A s V W C 300 (0.063 in. (1.6mm) from case) Thermal Resistance Parameter RJC RJC RJA Wt Junction-to-Case - IGBT Junction-to-Case - Diode Junction-to-Ambient (PCB mount)* Weight Typ. Max. --- --- --- 0.3 (0.01) 3.3 7.0 50 --- Units C/W g (oz) * When mounted on 1" square PCB (FR-4 or G-10 Material). For recommended footprint and soldering techniques refer to application note #AN-994 www.irf.com 1 2/20/04 IRG4RC10KDPbF Electrical Characteristics @ TJ = 25C (unless otherwise specified) V(BR)CES V(BR)CES/TJ VCE(on) VGE(th) VGE(th)/TJ gfe ICES VFM IGES Parameter Min. Typ. Max. Units Conditions Collector-to-Emitter Breakdown Voltage 600 -- -- V VGE = 0V, IC = 250A Temperature Coeff. of Breakdown Voltage -- 0.58 -- V/C VGE = 0V, IC = 1.0mA Collector-to-Emitter Saturation Voltage -- 2.39 2.62 IC = 5.0A VGE = 15V See Fig. 2, 5 -- 3.25 -- V IC = 9.0A -- 2.63 -- IC = 5.0A, TJ = 150C Gate Threshold Voltage 3.0 -- 6.5 VCE = VGE, IC = 250A Temperature Coeff. of Threshold Voltage -- -11 -- mV/C VCE = VGE, IC = 250A Forward Transconductance 1.2 1.8 -- S VCE = 50V, IC = 5.0A Zero Gate Voltage Collector Current -- -- 250 A VGE = 0V, VCE = 600V -- -- 1000 VGE = 0V, VCE = 600V, TJ = 150C Diode Forward Voltage Drop -- 1.5 1.8 V IC = 4.0A See Fig. 13 -- 1.4 1.7 IC = 4.0A, TJ = 150C Gate-to-Emitter Leakage Current -- -- 100 nA VGE = 20V Switching Characteristics @ TJ = 25C (unless otherwise specified) Qg Qge Qgc td(on) tr td(off) tf Eon Eoff Ets tsc Parameter Total Gate Charge (turn-on) Gate - Emitter Charge (turn-on) Gate - Collector Charge (turn-on) Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Turn-On Switching Loss Turn-Off Switching Loss Total Switching Loss Short Circuit Withstand Time td(on) tr td(off) tf Ets LE Cies Coes Cres trr Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Total Switching Loss Internal Emitter Inductance Input Capacitance Output Capacitance Reverse Transfer Capacitance Diode Reverse Recovery Time Irr Diode Peak Reverse Recovery Current Qrr Diode Reverse Recovery Charge di(rec)M /dt Diode Peak Rate of Fall of Recovery During tb 2 Min. -- -- -- -- -- -- -- -- -- -- 10 Typ. 19 2.9 9.8 49 28 97 140 0.25 0.14 0.39 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 46 32 100 310 0.56 7.5 220 29 7.5 28 38 2.9 3.7 40 70 280 235 Max. Units Conditions 29 IC = 5.0A 4.3 nC VCC = 400V See Fig.8 15 VGE = 15V -- -- TJ = 25C ns 150 IC = 5.0A, VCC = 480V 210 VGE = 15V, RG = 100 -- Energy losses include "tail" -- mJ and diode reverse recovery 0.48 See Fig. 9,10,14 -- s VCC = 360V, TJ = 125C VGE = 15V, RG = 100 , VCPK < 500V -- TJ = 150C, See Fig. 10,11,14 -- IC = 5.0A, VCC = 480V ns -- VGE = 15V, RG = 100 -- Energy losses include "tail" -- mJ and diode reverse recovery -- nH Measured 5mm from package -- VGE = 0V -- pF VCC = 30V See Fig. 7 -- = 1.0MHz 42 ns TJ = 25C See Fig. 57 TJ = 125C 14 IF = 4.0A 5.2 A TJ = 25C See Fig. 6.7 TJ = 125C 15 VR = 200V 60 nC TJ = 25C See Fig. 105 TJ = 125C 16 di/dt = 200A/s -- A/s TJ = 25C See Fig. -- TJ = 125C 17 www.irf.com IRG4RC10KDPbF 1.6 LOAD CURRENT (A) For both: Duty cycle: 50% TJ = 125C Tsink = 55 90C Gate drive as specified 1.2 Power Dissipation = 1.4 W Square wave: 60% of rated voltage 0.8 I 0.4 Ideal diodes 0.0 0.1 1 10 100 f, Frequency (KHz) Fig. 1 - Typical Load Current vs. Frequency (Load Current = IRMS of fundamental) 100 TJ = 25 C 10 1 1.0 TJ = 150 C V GE = 15V 20s PULSE WIDTH 2.0 3.0 4.0 5.0 6.0 VCE , Collector-to-Emitter Voltage (V) Fig. 2 - Typical Output Characteristics www.irf.com 7.0 I C , Collector-to-Emitter Current (A) I C, Collector Current (A) 100 10 TJ = 150 C TJ = 25 C 1 5 10 V CC = 50V 5s PULSE WIDTH 15 20 VGE , Gate-to-Emitter Voltage (V) Fig. 3 - Typical Transfer Characteristics 3 IRG4RC10KDPbF 5.0 VCE , Collector-to-Emitter Voltage(V) Maximum DC Collector Current(A) 10 8 6 4 2 0 25 50 75 100 125 150 VGE = 15V 80 us PULSE WIDTH 4.0 3.0 IC = 5A IC = 2.5 A 2.0 1.0 -60 -40 -20 0 20 40 60 80 100 120 140 160 TJ , Junction Temperature ( C) TC , Case Temperature ( C) Fig. 4 - Maximum Collector Current vs. Case Temperature IC = 10 A Fig. 5 - Typical Collector-to-Emitter Voltage vs. Junction Temperature Thermal Response (Z thJC ) 10 D = 0.50 1 0.20 0.10 0.05 0.1 0.02 0.01 PDM SINGLE PULSE (THERMAL RESPONSE) t1 t2 0.01 0.00001 Notes: 1. Duty factor D = t 1 / t 2 2. Peak TJ = PDM x Z thJC + TC 0.0001 0.001 0.01 0.1 1 t1 , Rectangular Pulse Duration (sec) Fig. 6 - Maximum Effective Transient Thermal Impedance, Junction-to-Case 4 www.irf.com IRG4RC10KDPbF VGE = 0V, f = 1MHz Cies = Cge + Cgc , Cce SHORTED Cres = Cgc Coes = Cce + Cgc 300 Cies 200 100 Coes 0 20 VGE , Gate-to-Emitter Voltage (V) C, Capacitance (pF) 400 16 12 8 4 Cres 1 10 0 100 VCE , Collector-to-Emitter Voltage (V) 10 Total Switching Losses (mJ) Total Switching Losses (mJ) V CC = 480V V GE = 15V TJ = 25 C 0.38 I C = 5.0A 0.36 0.34 0.32 20 40 60 RG , Gate Resistance 80 () Fig. 9 - Typical Switching Losses vs. Gate Resistance www.irf.com 4 8 12 16 20 Fig. 8 - Typical Gate Charge vs. Gate-to-Emitter Voltage 0.40 0 0 QG , Total Gate Charge (nC) Fig. 7 - Typical Capacitance vs. Collector-to-Emitter Voltage 0.30 VCC = 400V I C = 5.0A 100 50 RG = Ohm VGE = 15V VCC = 480V IC = 10 A 1 IC = 5A IC = 2.5 A 0.1 -60 -40 -20 0 20 40 60 80 100 120 140 160 TJ , Junction Temperature ( C ) Fig. 10 - Typical Switching Losses vs. Junction Temperature 5 IRG4RC10KDPbF RG TJ VCC VGE = Ohm 50 = 150 C = 480V = 15V 100 I C , Collector-to-Emitter Current (A) Total Switching Losses (mJ) 2.0 1.5 1.0 0.5 0.0 0 2 4 6 8 10 1 10 VGE = 20V T J = 125 o C SAFE OPERATING AREA 1 I C , Collector Current (A) 10 100 1000 VCE, Collector-to-Emitter Voltage (V) Fig. 11 - Typical Switching Losses vs. Collector-to-Emitter Current Fig. 12 - Turn-Off SOA 100 TJ = 150C 10 T = 125C J T = 25C J 1 0.1 0.0 1.0 2.0 3.0 4.0 5.0 6.0 Forward Voltage Drop - V FM(V) Fig. 13 - Maximum Forward Voltage Drop vs. Instantaneous Forward Current 6 www.irf.com IRG4RC10KDPbF 50 14 I F = 8.0A 45 12 I F = 4.0A 10 I F = 8.0A I F = 4.0A Irr- ( A) trr- (nC) 40 VR = 200V TJ = 125C TJ = 25C 35 8 6 30 4 25 2 VR = 200V TJ = 125C TJ = 25C 20 100 di f /dt - (A/s) 0 100 1000 di f /dt - (A/s) 1000 Fig. 15 - Typical Recovery Current vs. dif/dt Fig. 14 - Typical Reverse Recovery vs. dif/dt 200 1000 VR = 200V TJ = 125C TJ = 25C VR = 200V TJ = 125C TJ = 25C 160 I F = 8.0A di (rec) M/dt- (A /s) I F = 4.0A Qrr- (nC) 120 I F = 8.0A 80 I F = 4.0A 40 0 100 di f /dt - (A/s) 1000 Fig. 16 - Typical Stored Charge vs. dif/dt www.irf.com 100 100 A di f /dt - (A/s) 1000 Fig. 17 - Typical di(rec)M/dt vs. dif/dt, 7 IRG4RC10KDPbF Same type device as D.U.T. 430F 80% of Vce 90% D.U.T. 10% Vge VC 90% td(off) 10% IC 5% Fig. 18a - Test Circuit for Measurement of tf tr ILM, Eon, Eoff(diode), trr, Qrr, Irr, td(on), tr, td(off), tf t d(on) t=5s Eon Eoff Ets= (Eon +Eoff ) Fig. 18b - Test Waveforms for Circuit of Fig. 18a, Defining Eoff, td(off), tf GATE VOLTAGE D.U.T. 10% +Vg trr Ic Qrr = tx DUT VOLTAGE AND CURRENT Vce 10% Ic 90% Ic tr td(on) 10% Irr Ipk Vpk Vcc Irr Ic DIODE RECOVERY WAVEFORMS 5% Vce t1 t2 VceieIcdtdt Eon = Vce t1 t2 DIODE REVERSE RECOVERY ENERGY t3 Fig. 18c - Test Waveforms for Circuit of Fig. 18a, Defining Eon, td(on), tr 8 +Vg 10% Vcc Vcc trr id Ic dtdt tx t4 Erec = Vd VdidIcdt dt t3 t4 Fig. 18d - Test Waveforms for Circuit of Fig. 18a, Defining Erec, trr, Qrr, Irr www.irf.com IRG4RC10KDPbF Vg GATE SIGNAL DEVICE UNDER TEST CURRENT D.U.T. VOLTAGE IN D.U.T. CURRENT IN D1 t0 t1 t2 Figure 18e. Macro Waveforms for Figure 18a's Test Circuit D.U.T. L 1000V Vc* RL= 0 - 480V 480V 4 X IC @25C 50V 6000F 100V Figure 19. Clamped Inductive Load Test Circuit www.irf.com Figure 20. Pulsed Collector Current Test Circuit 9 IRG4RC10KDPbF D-Pak (TO-252AA) Package Outline Dimensions are shown in millimeters (inches) 2.38 (.094) 2.19 (.086) 6.73 (.265) 6.35 (.250) 1.14 (.045) 0.89 (.035) -A1.27 (.050) 0.88 (.035) 5.46 (.215) 5.21 (.205) 0.58 (.023) 0.46 (.018) 4 6.45 (.245) 5.68 (.224) 6.22 (.245) 5.97 (.235) 1.02 (.040) 1.64 (.025) 1 2 10.42 (.410) 9.40 (.370) 3 LEAD ASSIGNMENTS 1 - GATE 0.51 (.020) MIN. -B1.52 (.060) 1.15 (.045) 4 - DRAIN 3X 2X 2 - DRAIN 3 - SOURCE 1.14 (.045) 0.76 (.030) 0.89 (.035) 0.64 (.025) 0.25 (.010) 0.58 (.023) 0.46 (.018) M A M B NOTES: 1 DIMENSIONING & TOLERANCING PER ANSI Y14.5M, 1982. 2.28 (.090) 2 CONTROLLING DIMENSION : INCH. 3 CONFORMS TO JEDEC OUTLINE TO-252AA. 4.57 (.180) 4 DIMENSIONS SHOWN ARE BEFORE SOLDER DIP, SOLDER DIP MAX. +0.16 (.006). D-Pak (TO-252AA) Part Marking Information (Lead-Free) EXAMPLE: THIS IS AN IRFR120 WITH AS S EMBLY LOT CODE 1234 AS S EMBLED ON WW 16, 1999 IN T HE AS SEMBLY LINE "A" INT ERNAT IONAL RECTIFIER LOGO PART NUMBER IRFR120 12 Note: "P" in assembly line pos ition indicates "Lead-Free" AS S EMBLY LOT CODE 916A 34 DAT E CODE YEAR 9 = 1999 WEEK 16 LINE A OR INTERNATIONAL RECTIFIER LOGO PART NUMBER IRFR120 P916A 12 AS S EMBLY LOT CODE 10 34 DATE CODE P = DES IGNATES LEAD-FREE PRODUCT (OPTIONAL) YEAR 9 = 1999 WEEK 16 A = AS S EMBLY S IT E CODE www.irf.com IRG4RC10KDPbF Notes: Repetitive rating: VGE=20V; pulse width limited by maximum junction temperature (figure 20) VCC=80%(VCES), VGE=20V, L=10H, RG= 100 (figure 19) Pulse width 80s; duty factor 0.1%. Pulse width 5.0s, single shot. D-Pak (TO-252AA) Tape & Reel Information Dimensions are shown in millimeters (inches) TR TRR 16.3 ( .641 ) 15.7 ( .619 ) 12.1 ( .476 ) 11.9 ( .469 ) FEED DIRECTION TRL 16.3 ( .641 ) 15.7 ( .619 ) 8.1 ( .318 ) 7.9 ( .312 ) FEED DIRECTION NOTES : 1. CONTROLLING DIMENSION : MILLIMETER. 2. ALL DIMENSIONS ARE SHOWN IN MILLIMETERS ( INCHES ). 3. OUTLINE CONFORMS TO EIA-481 & EIA-541. 13 INCH 16 mm NOTES : 1. OUTLINE CONFORMS TO EIA-481. Data and specifications subject to change without notice. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information.02/04 www.irf.com 11 Note: For the most current drawings please refer to the IR website at: http://www.irf.com/package/