SURFACE MOUNT DISPLAY Part Number: ACSC04-41SRWA-F01 Super Bright Red Features Description z 0.4 inch digit height. The Super Bright Red source color devices are made with z Low current operation. Gallium Aluminum Arsenide Red Light Emitting Diode. z Excellent character appearance. z Mechanically rugged. z Gray face,white segment. z Package:400pcs/ reel. z Moisture sensitivity level : level 2a. z RoHS compliant. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is 0.25(0.01")unless otherwise noted. 2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 3. The gap between the reflector and PCB shall not exceed 0.25mm. SPEC NO: DSAF7020 REV NO: V.8 DATE: MAR/23/2011 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1351000373 Selection Guide Part No. Dice ACSC04-41SRWA-F01 Iv (ucd) [1] @ 10mA Lens Type Super Bright Red (GaAlAs) White Diffused Min. Typ. 5600 14000 Description Common Cathode, Rt. Hand Decimal. Note: 1. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength Super Bright Red D [1] Dominant Wavelength 1/2 Max. Units Test Conditions 660 nm IF=20mA Super Bright Red 640 nm IF=20mA Spectral Line Half-width Super Bright Red 20 nm IF=20mA C Capacitance Super Bright Red 45 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Red 1.85 2.5 V IF=20mA IR Reverse Current Super Bright Red 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter Super Bright Red Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 155 mA 5 V Reverse Voltage Operating / Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAF7020 REV NO: V.8 DATE: MAR/23/2011 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1351000373 Super Bright Red ACSC04-41SRWA-F01 SPEC NO: DSAF7020 REV NO: V.8 DATE: MAR/23/2011 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1351000373 ACSC04-41SRWA-F01 Recommended Soldering Pattern (Units : mm; Tolerance: 0.15) Reel Dimension Tape Specifications (Units : mm) SPEC NO: DSAF7020 REV NO: V.8 DATE: MAR/23/2011 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1351000373 PACKING & LABEL SPECIFICATIONS ACSC04-41SRWA-F01 SPEC NO: DSAF7020 REV NO: V.8 DATE: MAR/23/2011 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: J.Yu ERP: 1351000373