3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Round Conductor Flat Cable
.025" 30 AWG Stranded, PVC 3754 Series
• Close spacing permits higher signal density
• PVC insulation provides excellent fl exibility
• 30 AWG stranded on .025 inch spacing allows for
mass termination as well as increased fl exibility
• Recommended for use with the 82XXX-600X Series
.050" x.100" Tripolarized Wiremount Mini Socket
(82XXX-600X) and Pak 25 (P25E-XXX-STGF)
• See the Regulatory Information Appendix
(RIA) in the “RoHS compliance” section of
www.3Mconnectors.com for compliance
information (RIA E1 & C1 apply)
Date Modifi ed: November 1, 2013 TS-0875-E
Sheet 1 of 3
Physical
Insulation:
Material: Polyvinyl Chloride (PVC)
Color: Gray
Marking:
Standard: None
Conductors: 30 AWG 7 X 38 [ 7 X 0.102 ] Tinned Stranded Copper
Electrical
Voltage Rating: USA: 30V EU: <50V
Insulation Resistance: >1 x 1010 Ω /10 ft [3 m]
Characteristic Impedance: Unbalanced Balanced
73 Ω 122 Ω
Capacitance: 20.8 pF/ft (68.2 pF/m) 12.0 pF/ft (39.4 pF/m)
Inductance: .11 μH/ft (0.36 μH/m) .18 μH/ft (0.59 μH/m)
Propagation Delay: 1.51 ns/ft (4.95 ns/m) 1.45 ns/ft (4.76 ns/m)
Velocity of Propagation: 67% 70%
Note: Unbalanced is measured between ground-signal-ground conductors. Balanced is measured between signal conductors within a pair.
Environmental
Temperature Rating: -20°C to +105°C
Flammability Rating: USA:VW-1
UL File No.: E42769, Style No.: 20596
3M™ Round Conductor Flat Cable
.025" 30 AWG Stranded, PVC 3754 Series
TS-0875-E
Sheet 2 of 3
3
Electronic Solutions Division
Interconnect Solutions
http://www.3Mconnectors.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
Inch
[mm]
Tolerance Unless Noted
.0 .00 .000
Inch ±.1 ±.01 ±.005
[ ] Dimensions for Reference Only
Ordering Information
3754/XX
Note: Red marking on one edge of cable designates wire #1.
Number of Conductors
(See Table)
Note: Available in standard 100 ft or 300 ft rolls, please specify
when ordering. Contact 3M for availability of additional conductor
counts and/or custom roll lengths.
A
B
.025 ± .002 Typ
[ 0.64 ]
.013 ± .005
[ 0.33 ]
.025 ± .003
[ 0.64 ]
PVC Insulation
30 AWG 7 X 38 ( 7 X 0.102 ) Tinned
Stranded Copper Conductors
Number of
Conductors
3M Part
Number Dimension A Dimension B
10 3754/10 0.250 ± .006 [ 6.350 ] 0.225 ± .004 [5.72 ]
12 3754/12 0.300 ± .006 [7.62] 0.275 ± .004 [6.99]
14 3754/14 0.350 ± .006 [8.89] 0.325 ± .004 [8.26]
16 3754/16 0.400 ± .006 [10.16] 0.375 ± .004 [9.53]
20 3754/20 0.500 ± .006 [ 12.70 ] 0.475 ± .004 [ 12.07 ]
26 3754/26 0.650 ± .006 [ 16.51 ] 0.625 ± .004 [ 15.88 ]
30 3754/30 0.750 ± .006 [ 19.05 ] 0.725 ± .006 [ 18.42 ]
32 3754/32 0.800 ± .008 [ 20.32 ] 0.775 ± .006 [ 19.69 ]
34 3754/34 0.850 ± .009 [ 21.59 ] 0.825 ± .006 [ 20.96 ]
36 3754/36 0.900 ± .009 [ 22.86 ] 0.875 ± .006 [ 22.23 ]
40 3754/40 1.000 ± .009 [ 25.40 ] 0.975 ± .006 [ 24.77 ]
50 3754/50 1.250 ± .009 [ 31.75 ] 1.225 ± .006 [ 31.12 ]
52 3754/52 1.300 ± .009 [ 33.02 ] 1.275 ± .006 [ 32.39 ]
60 3754/60 1.500 ± .012 [ 38.10 ] 1.475 ± .009 [ 37.47 ]
68 3754/68 1.700 ± .012 [ 43.18 ] 1.675 ± .009 [ 42.55 ]
80 3754/80 2.000 ± .015 [ 50.80 ] 1.975 ± .011 [ 50.17 ]
100 3754/100 2.500 ± .015 [ 63.50 ] 2.475 ± .012 [ 62.87 ]
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except
where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of
the legal theory asserted.
Please recycle. Printed in USA.
© 3M 2013. All rights reserved.
RIA-2217B-E 3M is a trademark of 3M Company.
3
3M Electronics Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
U.S.A.
1-800-225-5373
www.3Mconnectors.com
