C-51505NFQJ-LG-AF - RF Micro Devices

C-51505NFQJ-LG-AF (AF) No. 2002-0183 OPTREX CORPORATION Page 1/18

LCD Module Technical Specification

C-51505NFQJ-LG-AF

Table of Contents

1. General Specifications..................................................................................................................................2

2. Electrical Specifications...............................................................................................................................3

3. Optical Specifications ...................................................................................................................................7

4. I/O Terminal......................................................................................................................................................9

5. Test...................................................................................................................................................................11

6. Appearance Standards................................................................................................................................12

7. Code System of Production Lot...............................................................................................................16

8. Type Number..................................................................................................................................................16

9. Applying Precautions ..................................................................................................................................16

10. Precautions Relating Product Handling................................................................................................17

11. Warranty........................................................................................................................................................18

Checked by (Design Engineering Div.)

Checked by (Quality Assurance Div.)

Approved by (Production Div.)

Prepared by (Production Div.)

Revision History

Rev. Date Page Comment

Type No.

Jul 3, 2002

OPTREX

First Edition

Final Revision

******

C-51505NFQJ-LG-AF (AF) No. 2002-0183 OPTREX CORPORATION Page 2/18

1. General Specifications

Operating Temp. :min. -20°C ~ max. 70°C

Storage Temp. :min. -20°C ~ max. 70°C

Display Format :20 characters × 2 lines

Display Fonts :5 × 8 dots ( 1 character )

Viewing Area :83.0 (W) × 18.6 (H) mm

Outline Dimensions :116.0 (W) × 37.0 (H) × (15.6) (D) mm

Weight :42.9g max.

LCD Type :NTD-21333

( STN / Color-mode / Transmissive)

Viewing Angle :6:00

Data Transfer :8-bit parallel data transfer

Backlight :LED Backlight / Green

Additional Spec :Vivid Color Display Specification

(High Performance Color Film is Used)

Drawings :Dimensional Outline UE-311044

C-51505NFQJ-LG-AF (AF) No. 2002-0183 OPTREX CORPORATION Page 3/18

2. Electrical Specifications

2.1. Absolute Maximum Ratings VSS=0V

Parameter Symbol Conditions Min. Max. Units

Supply Voltage

(Logic)

VCC-VSS --0.3 7.0 V

Supply Voltage

(LCD Drive)

VCC-VEE --0.3 13.5V

Input Voltage VI--0.3 VCC+0.3 V

2.2. DC Characteristics Ta=25°C, VCC=5V, VSS=VEE=0V

Parameter Symbol Conditions Min. Typ. Max. Units

Supply Voltage

(Logic)

VCC-VSS -4.5 -5.5 V

Supply Voltage

(LCD Drive)

VCC-VEE Shown in 3.1 V

High Level

Input Voltage

VIH -2.2 -VCC V

Low Level

Input Voltage

VIL --0.3 -0.8V

High Level

Output Voltage

VOH IOH=-0.25mA 2.4 - - V

Low Level

Output Voltage

VOL IOL=1.2mA - - 0.4 V

Supply Current ICC VCC-VSS=5.3V-2.0 3.0 mA

All voltage values are referenced to VSS =0V

V1 to V5 must maintain VDD ≥ V1 ≥ V2 ≥ V3 ≥ V4 ≥V5.

C-51505NFQJ-LG-AF (AF) No. 2002-0183 OPTREX CORPORATION Page 4/18

2.3. AC Characteristic

Read Operation VCC=5.0V±10%

Parameter Symbol Min. Max. Units

Enable Cycle Time tCYCE500 -ns

Enable “H” Level Pulse Width twHE 300 -ns

Enable Rise/Fall Time tRE, tFE -25 ns

RS,R/W Setup Time (8-bit operation mode)

(4-bit operation mode) tAS 60

100 -ns

RS,R/W Address Hold Time tAH 10 -ns

Read Data Output Delay tRD -190 ns

Read Data Hold Time tDHR 20 -ns

Read Operation Timing

R/W

VIH

VIL

tWHE

VIL

tCYCE

tRE tFE

tRD tDHR

tAHtAS

VIL

DB0~DB7 Valid Data

VIH

VIL

VIH

VIL VIH VILVIL

VIH

VIL VIH

VIL

C-51505NFQJ-LG-AF (AF) No. 2002-0183 OPTREX CORPORATION Page 5/18

Write Operation VCC=5.0V±10%

Parameter Symbol Min. Max. Units

Enable Cycle Time tCYCE500 -ns

Enable “H” Level Pulse Width twHE300 -ns

Enable Rise/Fall Time tRE, tFE -25 ns

RS,R/W Setup Time (8-bit operation mode)

(4-bit operation mode) tAS 60

100 -ns

RS,R/W Address Hold Time tAH 10 -ns

Data Output Delay tDS - - ns

Data Hold Time tDHR 10 -ns

Write Operation Timing

R/W VIHVIH

VIH

tWHE

tDS

tFE

tCYCE

tDHW

tRE

tAH

tAS

VIL

DB0~DB7 Valid Data

VIH

VIL

VIH

VIL

VIH VIL

VIL

VOH

VOL

VOH

VOL

C-51505NFQJ-LG-AF (AF) No. 2002-0183 OPTREX CORPORATION Page 6/18

2.4. Lighting Specifications

2.4.1. Absolute Maximum Ratings Ta=25°C

Parameter Symbol Conditions Min. Typ. Max. Units

Forward Voltage VFNote 1 - - 6.0 V

LED Power Dissipation PD- - - 0.125 mW

Reverse Voltage VR- - - 5.0 V

Note 1 : VF is defined as the voltage between ANODE and CATHODE as shown below.

2.4.2. Operating Characteristics Ta=25°C

Parameter Symbol Conditions Min. Typ. Max. Units

Foward Current IFVF=5.0V-15 18 mA

Luminance of

Backlight Surface

LVF=5.0V160 - - cd/m2

ANODE

CATHODE

C-51505NFQJ-LG-AF (AF) No. 2002-0183 OPTREX CORPORATION Page 7/18

3. Optical Specifications

3.1. LCD Driving Voltage

Parameter Symbol Conditions Min. Typ. Max. Units

Recommended Ta= -20°C- - 5.5 V

LCD Driving Voltage VCC-VEE Ta=25°C4.9 5.3 5.5 V

Note 1 Ta=70°C4.7 - - V

Note 1 : Voltage (Applied actual waveform to LCD Module) for the best contrast. The

range of minimum and maximum shows tolerance of the operating voltage. The

specified contrast ratio and response time are not guaranteed over the entire range.

3.2. Optical Characteristics Ta=25°C, 1/16 Duty, 1/5 Bias, VOD=5.5V (Note 4), θ= 0°C, φ=-°

Parameter Symbol Conditions Min. Typ. Max. Units

Contrast Ratio Note 1 CR θ= 0°C , φ=-°-80 -

Viewing Angle Shown in 3.3

Response Rise Note 2 TON - - 45 90 ms

Time Decay Note 3 TOFF - - 200 300 ms

Note 1 :Contrast ratio is definded as follows. (CR = LON / LOFF)

LON :Luminance of the ON segments

LOFF:Luminance of the OFF segments

Measuring Spot:0.9mmφ

Note 2 :The time that the luminance level reaches 90% of the saturation level from 0%

when ON signal is applied.

Note 3 :The time that the luminance level reaches 10% of the saturation level from

100% when OFF signal is applied.

Note 4 :Definition of Driving Voltage VOD

Assuming that the typical driving waveforms shown below are applied to the LCD

Panel at 1/A Duty - 1/B Bias (A: Duty Number, B: Bias Number). Driving voltage

VOD is definded as the voltage VO-P when the contrast ratio (CR=LON / LOFF) is at its

maximum.

O-P

1 /

( B-2 )×VO-P / B

1 / ( fF×A )

C-51505NFQJ-LG-AF (AF) No. 2002-0183 OPTREX CORPORATION Page 8/18

3.3. Definition of Viewing Angle and Optimum Viewing Area

*Point • shows the point where contrast ratio is measured. : θ= 0°, φ= -°

*Driving condition : 1/16 Duty, 1/5 Bias, VOD=5.5V, fF=84.3Hz

270°

180°

270°

135°

315°225°

45°

180°

90°

(φ = 0°)

*Area shows typ. CR≥2 (Measuring Spot:0.9mmφ)

3.4. System Block Diagram

Halogen bulb

Computer

Rotation Table ( θ,φ )

Temperature Chamber

LCD

Optical Fiber

Waveform Generator

Control Unit &

#1980A WB

Photometer φ

C-51505NFQJ-LG-AF (AF) No. 2002-0183 OPTREX CORPORATION Page 9/18

4. I/O Terminal

4.1. Pin Assignment

CN1

No. Symbol Function

1LED (A)LED Anode Terminal

2LED (K)LED Cathode Terminal

3VSS Power Supply (0V, GND)

4VCC Power Supply for Logic

5VEE Power Supply for LCD Drive

6RS Register Select Signal

7R/W Read/Write Select Signal H : Read L : Write

8EEnable Signal (No pull-up Resister)

9DB0 Data Bus Line / Non-connection at 4-bit operation

10 DB1 Data Bus Line / Non-connection at 4-bit operation

11 DB2 Data Bus Line / Non-connection at 4-bit operation

12 DB3 Data Bus Line / Non-connection at 4-bit operation

13 DB4 Data Bus Line

14 DB5 Data Bus Line

15 DB6 Data Bus Line

16 DB7 Data Bus Line

CN2

No. Symbol Function

1LED (A)LED Anode Terminal

2LED (K)LED Cathode Terminal

4.2. Example of Power Supply

It is recommended to apply a potentiometer for the contrast adjust due to the

tolerance of the driving voltage and its temperature dependence.

MODULE

VCC

VEE

VSS

VCC (+Voltage)

VR=10~20K

Ω

VSS (0V)

C-51505NFQJ-LG-AF (AF) No. 2002-0183 OPTREX CORPORATION Page 10/18

4.3. Block Diagram

R/W

Control LSI

NT3881D

L C D P

20 characters × 2 lines

Column Driver

LED Backlight

NT3883H

DB7

DB0

SEG 40 SEG 60

COM 16

LED (K)

LED (A)

VEE

VSS

VCC

To LSIBias Circuit

C-51505NFQJ-LG-AF (AF) No. 2002-0183 OPTREX CORPORATION Page 11/18

5. Test

No change on display and in operation under the following test condition.

Conditions: Unless otherwise specified, tests will be conducted under the following condition.

Temperature: 20±5°C

Humidity : 65±5%RH

tests will be not conducted under functioning state.

No. Parameter Conditions Notes

1High Temperature Operating 70°C±2°C, 96hrs (operation state)

2Low Temperature Operating -20°C±2°C, 96hrs (operation state) 1

3High Temperature Storage 70°C±2°C, 96hrs 2

4Low Temperature Storage -20°C±2°C, 96hrs 1,2

5Damp Proof Test 40°C±2°C,90~95%RH, 96hrs 1,2

6Vibration Test Total fixed amplitude : 1.5mm 3

Vibration Frequency : 10~55Hz

One cycle 60 seconds to 3 directions of X, Y, Z for

each 15 minutes

7Shock Test To be measured after dropping from 60cm high on

the concrete surface in packing state.

Note 1 :No dew condensation to be observed.

Note 2 :The function test shall be conducted after 4 hours storage at the normal

Temperature and humidity after removed from the test chamber.

Note 3 :Vibration test will be conducted to the product itself without putting it in a container.

60cm

Concrete Surface

Dropping method corner dropping

E,F,G face : once

B,C,D edge : once

A corner : once

Face dropping

Edge dropping

C-51505NFQJ-LG-AF (AF) No. 2002-0183 OPTREX CORPORATION Page 12/18

6. Appearance Standards

6.1. Inspection conditions

The LCD shall be inspected under 40W white fluorescent light.

The distance between the eyes and the sample shall be more than 30cm.

All directions for inspecting the sample should be within 45°against perpendicular line.

6.2. Definition of applicable Zones

A Zone : Active display area

B Zone : Out of active display area ~ Maximum seal line

C Zone : Rest parts

A Zone + B Zone = Validity viewing area

X : Maximum Seal Line

A Zone

B Zone

C Zone

C-51505NFQJ-LG-AF (AF) No. 2002-0183 OPTREX CORPORATION Page 13/18

6.3. Standards(E rank, LED) D = ( Long + Short ) / 2 * : Disregard Units : mm

No. Parameter Criteria

1The Shape of Dot (1) Pin Hole

Dimension Acceptable Number

D ≤ 0.10 *

1 pc / dot(only segment)or less

0.10 < D ≤ 0.15 2 pcs / cell or less

(2) Pattern Shift

| A – B | ≤ 0.15

(3) Breakage or Chips / Deformation

1.Segment Type

Dimension Acceptable Number

A ≤ 0.10 *

B ≤ 0.10 *

2.Dot Type

Dimension Acceptable Number

A≤0.10*

(Should not be connected to next dot)

1 pc / dot(only segment)or less

2 pcs / cell or less0.10<A≤0.15

(Should not be connected to next dot)

B ≤ 0.10 *

3.Defective type extends over multiple numbers of dots

Dimension Acceptable Number

D≤0.10*

1 pc / dot(only segment)or less

2 pcs / cell or less

(Individual dot must secure 1/2 area

0.10<D≤0.15

or more)

C-51505NFQJ-LG-AF (AF) No. 2002-0183 OPTREX CORPORATION Page 14/18

D = ( Long + Short ) / 2 * : Disregard Units : mm

No. Parameter Criteria

2Black and (1) Round Shape

White Spots, Zone Acceptable Number

Foreign Substances Dimension A B C

D ≤ 0.10 * * *

0.10< D ≤ 0.20 6 6 *

0.20< D ≤ 0.30 2 2 *

Individual dot must secure 1/2 area or more.

(2) Line Shape

Zone Acceptable Number

Length Width A B C

L ≤2.0 W≤0.03 * * *

L ≤2.0 0.03<W≤0.05 4 4 *

* 0.05<W In the same way (1) *

No more than 7pcs as total.

(Refer to “Complex Foreign Substance Defects”)

3Color Variation Not to be conspicuous defects.

4Air Bubbles

(between glass Zone Acceptable Number

& polarizer) Dimension A B C

D ≤ 0.15* * *

0.15< D ≤ 0.30 2 3 *

0.30< D ≤ 0.50 1 2 *

0.50< D ≤ 1.00 0 1 *

No more than 3pcs as total.

(Refer to “Complex Foreign Substance Defects”)

5Polarizer Scratches Not to be conspicuous defects.

6Polarizer Dirts If the stains are removed easily from LCDP surface, the module is

not defective.

7Complex Foreign Black spots, line shaped foreign substances or air bubbles between

Substance Defects glass & polarizer should be 7pcs maximum in total.

8Distance between 20mm or more

Different Foreign

Substance Defects

C-51505NFQJ-LG-AF (AF) No. 2002-0183 OPTREX CORPORATION Page 15/18

D = ( Long + Short ) / 2 * : Disregard Units : mm

No. Parameter Criteria

9Chipped Glass (1) Other than electrode pad areas and corner areas

“A” size:0.82or more “A” size:Less than 0.82

X Y ZX Y Z

*≤0.4 * * ≤0.3 *

≤2.5 ≤0.7 =t ≤2.0 ≤0.5 =t

≤3.5 ≤1.0 ≤1/2t ≤3.0 ≤0.5 ≤1/2t

≤5.5 ≤1.5 ≤1/3t ≤4.5 ≤1.2 ≤1/3t

(2) Corner Areas

1.Lead Areas

“A” size “A” size

0.82or more Less than 0.82

X+Y X+Y

≤4.0 ≤3.0

2.Other than electrode pad Areas

“A” size “A” size

0.82or more Less than 0.82

X+Y X+Y

≤3.0 ≤2.0

The total number of chipped glass defects shall be up to 5 spots.

The chipped glass shall be judged only from the size of the defect.

If the chipped area touches the seal line, the LCD is not acceptable.

X Y

C-51505NFQJ-LG-AF (AF) No. 2002-0183 OPTREX CORPORATION Page 16/18

7. Code System of Production Lot

The production lot of module is specified as follows.

Factory Number (Numeral)

Factory Code (Alphabet)

Production Week (1~5)

Production Month (1~9, X, Y, Z)

Production Year (Lower 2 digits)

8. Type Number

The type number of module is specified as follows.

C-51505NFQJ-LG-AF

9. Applying Precautions

Please contact us when questions and/or new problems not specified in this

specificationsarise.

C-51505NFQJ-LG-AF (AF) No. 2002-0183 OPTREX CORPORATION Page 17/18

10. Precautions Relating Product Handling

The Following precautions will guide you in handling our product correctly.

1) Liquid crystal display devices

1. The liquid crystal display device panel used in the liquid crystal display module is

made of plate glass. Avoid any strong mechanical shock. Should the glass break

handle it with care.

2. The polarizer adhering to the surface of the LCD is made of a soft material.

Guard against scratching it.

2) Care of the liquid crystal display module against static electricity discharge.

1. When working with the module, be sure to ground your body and any electrical

equipment you may be using. We strongly recommend the use of anti static mats

( made of rubber ), to protect work tables against the hazards of electrical shock.

2. Avoid the use of work clothing made of synthetic fibers. We recommend cotton

clothing or other conductivity-treated fibers.

3. Slowly and carefully remove the protective film from the LCD module, since this

operation can generate static electricity.

3) When the LCD module alone must be stored for long periods of time:

1. Protect the modules from high temperature and humidity.

2. Keep the modules out of direct sunlight or direct exposure to ultraviolet rays.

3. Protect the modules from excessive external forces.

4) Use the module with a power supply that is equipped with an overcurrent protector

circuit, since the module is not provided with this protective feature.

5) Do not ingest the LCD fluid itself should it leak out of a damaged LCD module.

Should hands or clothing come in contact with LCD fluid, wash immediately with soap.

6) Conductivity is not guaranteed for models that use metal holders where solder

connections between the metal holder and the PCB are not used. Please contact

us to discuss appropriate ways to assure conductivity.

7) For models which use CFL:

1. High voltage of 1000V or greater is applied to the CFL cable connector area.

Care should be taken not to touch connection areas to avoid burns.

2. Protect CFL cables from rubbing against the unit and thus causing the wire jacket

to become worn.

3. The use of CFLs for extended periods of time at low temperatures will significantly

shorten their service life.

8) For models which use touch panels:

1. Do not stack up modules since they can be damaged by components on neighboring

modules.

2. Do not place heavy objects on top of the product. This could cause glass breakage.

9) For models which use COG,TAB,or COF:

1. The mechanical strength of the product is low since the IC chip faces out

unprotected from the rear.

Be sure to protect the rear of the IC chip from external forces.

2. Given the fact that the rear of the IC chip is left exposed, in order to protect the unit

from electrical damage, avoid installation configurations in which the rear of the IC

chip runs the risk of making any electrical contact.

C-51505NFQJ-LG-AF (AF) No. 2002-0183 OPTREX CORPORATION Page 18/18

10) Models which use flexible cable, heat seal, or TAB:

1. In order to maintain reliability, do not touch or hold by the connector area.

2. Avoid any bending, pulling, or other excessive force, which can result in broken

connections.

11) In case of buffer material such as cushion / gasket is assembled into LCD module,

it may have an adverse effect on connecting parts ( LCD panel-TCP / HEAT SEAL /

FPC / etc., PCB-TCP / HEAT SEAL / FPC etc., TCP-HEAT SEAL, TCP-FPC, HEAT

SEAL-FPC, etc.,) depending on its materials.

Please check and evaluate these materials carefully before use.

12) In case of acrylic plate is attached to front side of LCD panel, cloudiness ( very

small cracks ) can occur on acrylic plate, being influenced by some components

generated from polarizer film.. Please check and evaluate those acrylic materials

carefully before use.

11. Warranty

This product has been manufactured to your company’s specifications as a part for use

in your company’s general electronic products. It is guaranteed to perform according to

delivery specifications. For any other use apart from general electronic equipment, we

cannot take responsibility if the product is used in medical devices, nuclear power

control equipment, aerospace equipment, fire and security systems, or any other

applications in which there is a direct risk to human life and where extremely high levels

of reliability are required. If the product is to be used in any of the above applications,

we will need to enter into a separate product liability agreement.

1. We cannot accept responsibility for any defect, which may arise from additional

manufacturing of the product (including disassembly and reassembly), after product

delivery.

2. We cannot accept responsibility for any defect, which may arise after the application

of strong external force to the product.

3. We cannot accept responsibility for any defect, which may arise due to the application

of static electricity after the product has passed your company’s acceptance

inspection procedures.

4. When the product is in CFL models, CFL service life and brightness will vary according

to the performance of the inverter used, leaks, etc. We cannot accept responsibility

for product performance, reliability, or defect, which may arise.

5. We cannot accept responsibility for intellectual property of a third party, which may

arise through the application of our product to your assembly with exception to those

issues relating directly to the structure or method of manufacturing of our product.

6. Optrex will not be held responsible for any quality guarantee issue for defect products

judged as Optrex-origin longer than 2 (two) years from Optrex production or 1(one)

year from Optrex, Optrex America, Optrex Europe delivery which ever comes later.