D
A
TA SHEE
T
SURFACE-MOUNT CERAMIC
MULTILAYER CAPACITORS
Class 1, NP0
50 V TO 500
V
Product Specification – Jul 06, 2004 V.10
Phycomp Product specification
Surface-mount ceramic
multilayer capacitors
Class 1, NP0
50 V to 500V
2004 Jul 06 Rev.10 2 www.yageo.com
FEATURES
• Six standard sizes
• High capacitance per unit volume
• Supplied in tape on reel or in bulk
case (case sizes 0402, 0603 and
0805 only)
• For high frequency applications
• NiSn terminations.
APPLICATIONS
• Consumer electronics
• Telecommunications
• Automotive
• Data processing.
DESCRIPTION
The capacitor consists of a
rectangular block of ceramic
dielectric in which a number of
interleaved precious metal
electrodes are contained. This
structure gives rise to a high
capacitance per unit volume.
The inner electrodes are connected
to the two terminations, silver dipped
with a barrier layer of plated nickel
and finally covered with a layer of
plated tin (NiSn). A cross section of
the structure is shown in Fig.1.
QUICK REFERENCE DATA
DESCRIPTION VALUE
Rated voltage Ur (DC) 50 V, 100 V, 200 V and 500 V (IEC)
Capacitance range
(E12 series); note 1:
50 V; note 2 0.47 pF to 22 nF
100 V 10 pF to 22 nF
200 V 10 pF to 5.6 nF
500 V 10 pF to 3.3 nF
Tolerance on capacitance:
C ≥ 10 pF ±5%; ±2%; ±1%
C < 10 pF ±0.5 pF; ±0.25 pF; ±0.1 pF
Test voltage (DC) for 1 minute:
50 V and 100 V 2.5 × Ur
200 V 3 × Ur
500 V 2 × Ur
Sectional specifications IEC 60384-10 second edition 1989-04;
also based on CECC 32 100
Detailed specification based on CECC 32 101-801
Climatic category (IEC 60068) 55/125/56
Notes
1. Other values below 10 pF and non E12 series are available on request.
2. Also applicable for applications up to 63 V.
MLB457
terminations
electrodes
ceramic material
Fig.1 Construction of a ceramic multilayer capacitor.
Phycomp Product specification
Surface-mount ceramic
multilayer capacitors
Class 1, NP0
50 V to 500V
2004 Jul 06 Rev.10 3 www.yageo.com
MECHANICAL DATA
MBB211
T
L4
L1
L2L3
W
Fig.2. Component outline.
For dimensions see Table 1.
Physical dimensions
Table 1 Capacitor dimensions
T L2 and L3
CASE SIZE L1 W
MIN. MAX. MIN. MAX.
L4
MIN.
Dimensions in millimetres
0402 1.0
±0.05 0.5
±0.05 0.45 0.55 0.20 0.30 0.40
0603 1.6 ±0.10 0.8 ±0.07 0.73 0.87 0.25 0.65 0.40
0805 2.0
±0.10 1.25
±0.10 0.50 1.35 0.25 0.75 0.55
1206 3.2
±0.15 1.6
±0.15 0.50 1.25 0.25 0.75 1.40
1210 3.2
±0.20 2.5
±0.20 0.50 1.75 0.25 0.75 1.40
1812 4.5 ±0.20 3.2 ±0.20 0.50 1.30 0.25 0.75 2.20
Dimensions in inches
0402 0.040
±0.002 0.020
±0.002 0.018 0.022 0.008 0.012 0.016
0603 0.063 ±0.004 0.032 ±0.003 0.029 0.035 0.010 0.026 0.016
0805 0.079 ±0.004 0.049 ±0.004 0.020 0.053 0.010 0.030 0.022
1206 0.126
±0.006 0.063
±0.006 0.020 0.049 0.010 0.030 0.056
1210 0.126
±0.008 0.098
±0.008 0.020 0.069 0.010 0.030 0.056
1812 0.177 ±0.008 0.126 ±0.008 0.020 0.051 0.010 0.030 0.088
Phycomp Product specification
Surface-mount ceramic
multilayer capacitors
Class 1, NP0
50 V to 500V
2004 Jul 06 Rev.10 4 www.yageo.com
SELECTION CHART FOR 50 V
50 V
C
(pF)
LAST THREE
DIGITS OF
12NC 0402 0603 0805 1206 1210 1812
0.47 477
0.56 567
0.68 687
0.82 827
1.0 108
1.2 128
1.5 158
1.8 188
2.2 228
2.7 278
3.3 338
3.9 398
4.7 478
5.6 568
6.8 688 0.5 ±0.05 0.8 ±0.07 0.6 ±0.1 0.6 ±0.1
8.2 828
10 109
12 129
15 159
18 189
22 229
27 279 0.5 to 1.0
33 339
39 399
47 479
56 569
68 689
82 829
Note
1. Values in shaded cells indicate thickness class.
Phycomp Product specification
Surface-mount ceramic
multilayer capacitors
Class 1, NP0
50 V to 500V
2004 Jul 06 Rev.10 5 www.yageo.com
SELECTION CHART FOR 50 V (CONTINUED)
50 V
C
(pF)
LAST THREE
DIGITS OF
12NC 0402 0603 0805 1206 1210 1812
100 101
120 121
150 151 0.5 ±0.05
180 181
220 221
270 271 0.8 ±0.07
330 331 0.6 ±0.1
390 391
470 471 0.6 ±0.1
560 561
680 681
820 821
1,000 102 0.5 to 1.0
1,200 122
1,500 152 0.85 ±0.1
1,800 182
2,200 222 1.25 ±0.1 0.5 to 1.0
2,700 272
3,300 332
3,900 392 0.85 ±0.1
4,700 472
5,600 562 1.15 ±0.1
6,800 682
8,200 822
10,000 103
12,000 123
15,000 153
18,000 183 0.9 to 1.3
22,000 223
Note
1. Values in shaded cells indicate thickness class.
Phycomp Product specification
Surface-mount ceramic
multilayer capacitors
Class 1, NP0
50 V to 500V
2004 Jul 06 Rev.10 6 www.yageo.com
Thickness classification and packing quantities
8 mm TAPE WIDTH
QUANTITY PER REEL
12 mm TAPE
WIDTH
QUANTITY PER
REEL
∅180 mm; 7" ∅330 mm; 13" ∅180 mm; 7"
BLISTER
QUANTITY PER BULK
CASE
THICKNESS
CLASSIFICATION
(mm)
PAPER BLISTER PAPER BLISTER 1812 0402 0603 0805
0.5 ±0.05 10,000 − 50,000 − − 50,000 − −
0.6 ±0.1 4,000 − 20,000 − − − − 10,000
0.8 ±0.07 4,000 − 15,000 − − − 15,000 −
0.85 ±0.1 4,000 − 15,000 − − − − 8,000
0.5 to 1.0 − 4,000 − 10,000 2,000 − − −
0.9 to 1.3 − 3,000 − 10,000 1 500 − − −
1.15 ±0.1 − 3,000 − 10,000 − − − −
1.25 ±0.1 − 3,000 − 10,000 − − − 5,000
Phycomp Product specification
Surface-mount ceramic
multilayer capacitors
Class 1, NP0
50 V to 500V
2004 Jul 06 Rev.10 7 www.yageo.com
ORDERING INFORMATION FOR 50 V
Com
p
onents ma
y
be ordered b
y
usin
g
either a Ph
y
com
p
’s uni
q
ue 12NC or sim
p
le 15-di
g
it clear text code.
Ordering code 12NC (preferred)
2 2 X X X X X X X X X X
Carrier type
22
38
54
blister
paper
bulk
Voltage
86 50 V
Size
9
7
1
3
2
5
0402 (1)
0603 (1)
0805 (1)
1206 (1)
1210
1812
Capacitance value
Tolerance
4
Packing
1
7
4
180 mm / 7" reel
330 mm / 13" reel
bulk case
RYA014_a
see selection chart
±0.25 pF for 5 pF ≤ C < 10 pF
±2% for C ≥ 10 pF
5±0.25 pF for C < 5 pF
±0.5 pF for 5 pF ≤ C < 10 pF
±5% for C ≥ 10 pF
8±0.1 pF for 5 pF ≤ C < 10 pF
(1)
±1% for C ≥ 10 pF
Clear text code
Example: 0805CG102J9B200
Size
Code
Temp.
Char. Capacitance Tol. Vol. Termination Packing Marking Series
0402 (1)
0603 (1)
0805 (1)
1206 (1)
1210
1812
CG = NP0 102 = 1000 pF; the
third digit signifies
the multiplying
factor:
8 = × 0.01
9 = × 0.1
0 = × 1
1 = × 10
2 = × 100
3 = × 1000
B = ±0.1 pF
C = ±0.25 pF
D = ±0.5 pF
F = ±1 %
G = ±2%
J = ±5%
9 = 50 V B = NiSn 2 = 180 mm; 7" paper
3 = 330 mm; 13" paper
B = 180 mm; 7" blister
F = 330 mm; 13" blister
P = bulk case
0 = no marking 0 = conv.
ceramic
Note
1. ±1 % only available in 0402, 0603, 0805, and 1206.
Note
1.
±
1 % onl
y
available in 0402, 0603, 0805, and 1206.
Phycomp Product specification
Surface-mount ceramic
multilayer capacitors
Class 1, NP0
50 V to 500V
2004 Jul 06 Rev.10 8 www.yageo.com
SELECTION CHART FOR 100 V
100 V
C
(pF)
LAST
TWO DIGITS
OF 12NC 0603 0805 1206 1210 1812
10 23
12 24
15 25
18 26
22 27
27 28
33 29
39 31
47 32
56 33
68 34
82 35 0.8 ±0.07 0.6 ±0.1 0.6 ±0.1
100 36
120 37
150 38
180 39
220 41
270 42
330 43
390 44
470 45
560 46
680 47
820 48
Note
1. Values in shaded cells indicate thickness class.
Phycomp Product specification
Surface-mount ceramic
multilayer capacitors
Class 1, NP0
50 V to 500V
2004 Jul 06 Rev.10 9 www.yageo.com
SELECTION CHART FOR 100 V (CONTINUED)
100 V
C
(pF)
LAST
TWO DIGITS
OF 12NC 0603 0805 1206 1210 1812
1,000 49 0.6 ±0.1
1,200 51
1,500 52 0.85 ±0.1 0.6 ±0.1
1,800 53
2,200 54 1.25 ±0.1
2,700 55
3,300 56
3,900 57 0.85 ±0.1
4,700 58
5,600 59 1.15 ±0.1
6,800 61
8,200 62 0.5 to 1.0
10,000 63
12,000 64 0.5 to 1.0
15,000 65
18,000 66 0.9 to 1.3
22,000 67
Note
1. Values in shaded cells indicate thickness class.
Phycomp Product specification
Surface-mount ceramic
multilayer capacitors
Class 1, NP0
50 V to 500V
2004 Jul 06 Rev.10 10 www.yageo.com
SELECTION CHART FOR 200 V AND 250 V
200 V 250 V
C
(pF)
LAST TWO
DIGITS OF
12NC 0805 1206 1210 1812 0805 1206 1210 1812
10 23
12 24
15 25
18 26
22 27
27 28
33 29
39 31
47 32 0.6 ±0.1 0.6 ±0.1 0.6 ±0.1 0.6 ±0.1
56 33
68 34
82 35
100 36
120 37
150 38
180 39
220 41
270 42
330 43 0.85 ±0.1 0.85 ±0.1
390 44
470 45 0.85 ±0.1 0.85 ±0.1
560 46 1.25 ±0.1 1.25 ±0.1
680 47
820 48
1,000 49
1,200 51
1
500 52 1.15 ±0.1 1.15 ±0.1
1
800 53 0.8 to 1.0 0.8 to 1.0
2
200 54
2,700 55 0.9 to 1.3 0.9 to 1.3
3,300 56
3
900 57 0.8 to 1.0 0.8 to 1.0
4
700 58 0.9 to 1.3 0.9 to 1.3
5,600 59
Note
1. Values in shaded cells indicate thickness class.
Phycomp Product specification
Surface-mount ceramic
multilayer capacitors
Class 1, NP0
50 V to 500V
2004 Jul 06 Rev.10 11 www.yageo.com
SELECTION CHART FOR 500 V
500 V
C
(pF)
LAST TWO
DIGITS OF
12NC 1206 1210 1812
10 23
12 24
15 25
18 26
22 27
27 28
33 29
39 31
47 32 0.6 ±0.1
56 33
68 34
82 35
100 36
120 37
150 38
180 39
220 41 0.8 to 1.0
270 42
330 43 0.85 ±0.1
390 44
470 45
560 46
680 47 1.15 ±0.1
820 48
1
000 49
1
200 51 0.9 to 1.3
1,500 52
1
800 53 1.2 to 1.75
2
200 54
2,700 55 0.9 to 1.3
3,300 56
3
900 57
4,700 58
5,600 59
Note
1. Values in shaded cells indicate thickness class.
Phycomp Product specification
Surface-mount ceramic
multilayer capacitors
Class 1, NP0
50 V to 500V
2004 Jul 06 Rev.10 12 www.yageo.com
Thickness classification and packing quantities
8 mm TAPE WIDTH
QUANTITY PER REEL
12 mm TAPE WIDTH
QUANTITY PER REEL
∅180 mm; 7" ∅330 mm; 13" ∅180 mm; 7" BLISTER
QUANTITY PER
BULK CASE
THICKNESS
CLASSIFICATION
(mm)
PAPER BLISTER PAPER BLISTER 1812 0603 0805
0.6 ±0.1 4,000 − 20,000 − − − 10,000
0.8 ±0.07 4,000 − 15,000 − − 15,000 −
0.85 ±0.1 4,000 − 15,000 − − − 8,000
0.8 to 1.0 − 4,000 − 10,000 2,000 − −
0.9 to 1.3 − 3,000 − 10,000 1 500 − −
1.15 ±0.1 − 3,000 − 10,000 − − −
1.25 ±0.1 − 3,000 − 10,000 − − 5,000
1.2 to 1.75 − 2 500 − 10,000 1 200 − −
Phycomp Product specification
Surface-mount ceramic
multilayer capacitors
Class 1, NP0
50 V to 500V
2004 Jul 06 Rev.10 13 www.yageo.com
ORDERING INFORMATION FOR 100 V TO 500 V
Components may be ordered by using either a Phycomp’s unique 12NC or simple 15-digit clear text code.
Ordering code 12NC (preferred)
2 2 X X X X X X 1 X X X
Carrier type
22
38
54
blister
paper
bulk
Voltage
60
93
83
97
100 V
200 V
250 V
500 V
Size
6
0
1
2
4
0603
0805
1206
1210
1812
Capacitance value
Tolerance
4
5
Packing
1
5
4
180 mm / 7" reel
330 mm / 13" reel
bulk case
RYA016_a
see selection chart
±2%
±5%
Clear text code
Example: 1206CG102GBB200
Size
Code
Temp.
Char. Capacitance Tol. Vol. Termination Packing Marking Series
0805
1206
1210
1812
CG = NP0 102 = 1000 pF;
the third digit
signifies the
multiplying factor:
0 = × 1
1 = × 10
2 = × 100
3 = × 1000
G = ±2%
J = ±5%
0 = 100 V
B = 200 V
C = 250 V
D = 500 V
B = NiSn 2 = 180 mm; 7" paper
3 = 330 mm; 13" paper
B = 180 mm; 7" blister
F = 330 mm; 13" blister
P = bulk case
0 = no marking 0 = conv.
ceramic
Phycomp Product specification
Surface-mount ceramic
multilayer capacitors
Class 1, NP0
50 V to 500V
2004 Jul 06 Rev.10 14 www.yageo.com
ELECTRICAL CHARACTERISTICS
Class 1 capacitors; NP0 dielectric; NiSn terminations
Unless otherwise stated all electrical values apply at an ambient temperature of 20 ±1 °C, an atmospheric pressure of
86 to 106 kPa, and a relative humidity of 63 to 67%.
DESCRIPTION VALUE
Capacitance range (E12 series); note 1
50 V 0.47 pF to 22 nF
100 V 10 pF to 22 nF
200 V 10 pF to 5.6 nF
500 V 10 pF to 3.3 nF
Tolerance on capacitance after 1,000 hours
C ≥ 10 pF ±5%; ±2%
5 pF ≤ C < 10 pF ±0.5 pF, ±0.25 pF
C < 5 pF ±0.25 pF
Tan δ; note 1
C < 10pF
+
≤7.0
3
10
C × 10−4 or 30 × 10−4, whichever is smallest
C ≥ 10 pF ≤10 × 10−4
Insulation resistance after 1 minute at Ur (DC) Rins > 10 GΩ
Temperature coefficient:
C < 10 pF (0 ±150) × 10−6/K; note 2
C ≥ 10 pF (0 ±30) × 10−6/K; note 2
Ageing not applicable
Notes
1. Measured at 1 V, 1 MHz for C ≤ 1000 pF and 1 V, 1 kHz for C > 1,000 pF, using a four-gauge method.
2. For sizes 0402 and 0603 all capacitance values from 0.47 pF to 150 pF have a temperature coefficient of
(0 ±30) × 10−6/K.
Phycomp Product specification
Surface-mount ceramic
multilayer capacitors
Class 1, NP0
50 V to 500V
2004 Jul 06 Rev.10 15 www.yageo.com
40
40
40
MEA607
20
0
20
0 40 80 120
T ( C)
o
TC
(x10 /K)
6
MEA608
7.5
5
2.5
0
– 40 0 40 80 120
T ( C)
o
tan δ
(x 10 )
–
4
10
Fig.3 Typical temperature coefficient as
a function of tem
p
erature. Fig.4 Typical tan
δ as a function of temperature.
15
5
Ð 5
Ð 15
MEA614
0102030
10
0
Ð 10
40 50
VDC (V)
∆
C
(%)
C
Fig.5 Typical capacitance change with respect to
the capacitance at 1 V as a function of
DC voltage.
Sample limits (broken lines).
Requirement levels (dotted lines).
Fig.5 Typical capacitance change with respect to
the capacitance at 1 V as a function of
DC voltage.
0 250 500
1
0.5
−0.5
−1
0
MGA457 - 1
VDC (V)
C
(%)
∆C
Fig.6 Typical capacitance change with respect to
the capacitance at 1 V as a function of
DC voltage.
High voltage series.
Phycomp Product specification
Surface-mount ceramic
multilayer capacitors
Class 1, NP0
50 V to 500V
2004 Jul 06 Rev.10 16 www.yageo.com
REVISION HISTORY
Revision Date Change
Notification
Description
Rev.6 2001 Jul 16
− - Converted to Phycomp brand
- Highest value in 50 V range reduced from 47 nF to 33 nF
- Various thickness classes corrected
- Products in 2020 case size removed
- AgPd finishing for terminations no longer supported
Rev.7 2003 Mar 21 - - Updated company logo
Rev.8 2003 Jul 24 - - Cover page revised
Rev.9 2004 Apr 27 - - "Silver palladium (AgPd)" in the description on page 2 deleted
Rev.10 2004 Jul 06 - - Insulation resistance updated!!
print-friendly version
Product Detail Information
Product Group Multilayer Capacitor Chips and Arrays
Ordering Code CC1206ZRY5V9BB104
Ordering Code 223858119812
Unified CTC C1206ZRY5V9BB104
Additional Product Code 12062F104Z9B20D
Description General purpose, 1206, Y5V, 100nF, -20/+80%, 50V, 7" paper
Status Standard
Size Code 1206
Capacitance Tolerance -20/+80%
Packing Style Paper Tape & 180mm (7") Reel
Dielectric Material (TC) Y5V
Rated Voltage 50V
Capacitance 100 nF
Related Data Sheets, Catalogs and Application Notes:
Datasheet - Y5V 16/25/50 V, Rev.11 [246 kb]
Product Selection Guide 2008 (revision 1) [3.65 MB]
Yageo Passive Components 2008 [3.26 mb]
Environmental declaration
Appl. note - DC, AC and Pulse load of Multilayer Ceramic Capacitors [308 kb]
MLCC sample kits [177 kb]
Appl. manual - MLCC application manual [577 kb]
Datasheet - MLCC introduction, Rev.9 [98 kb]
Datasheet - MLCC general data of packing, labelling, mounting, tests & requirements;
Rev.7 [159 kb]
Flowchart - Quality Flowchart, Rev.4 [80kb]
Calculation tool - MLCC Spice Data
General info - Standard Values in a Decade [8.39 kb]
Requirements, Rev.7 [158 kb]
For optimal printing of Data sheets print from page 2 of the PDF.
Note Clear Text Codes in the data sheets can differ from the Clear Text Codes displayed above.
The CTC displayed above is a new code which has been introduced to align product codes in the
complete Yageo organisation. You can search products with the CTC displayed in the data sheet
by using the competitor part number search function.
Documents are in PDF format so to view and print them you will need Adobe Acrobat Reader
installed on your computer. This is available free of charge.
Copyright © 2002-2005 Yageo Corporation
Privacy Policy | Access to and use of this web site is subject to the following Terms of use
Springsite Technology