F-219 (Rev 06NOV20) TFM-115-02-L-S TFM-110-02-L-D-LC TFM-110-01-L-D-RE1-WT (1.27 mm) .050" TFML-115-02-L-D-K SMT & THROUGH-HOLE HEADER Shrouded body for blind mating TFM Board Mates: SFM, SFMC SPECIFICATIONS For complete specifications and recommended PCB layouts see www.samtec.com?TFM or www.samtec.com?TFML (1.27 mm x 1.27 mm) .050" x .050" micro pitch TFM Cable Mates: SFSD TFML Board Mates: SFML Insulator Material: Black Liquid Crystal Polymer Terminal Material: Phosphor Bronze Plating: Au or Sn over 50 " (1.27 m) Ni Current Rating (TFM/SFM): 3.2 A per pin (2 pins powered) Voltage Rating: 250 VAC mated with SFM Operating Temp Range: -55 C to +125 C RoHS Compliant: Yes APPLICATIONS TFM-DH Board Mates: SFM (-DH), SFMC TFM-DH Cable Mates: SFSDX (-S, -D, -SR, -DR) 10 YEAR MFG WITH 30 " GOLD EXTENDED LIFE PRODUCT HIGH-SPEED CHANNEL PERFORMANCE HIGH MATING CYCLES PROCESSING Lead-Free Solderable: Yes SMT Lead Coplanarity: (0.10 mm) .004" max (05-25) (0.15 mm) .006" max (30-50)* *(.004" stencil solution may be available; contact IPG@samtec.com) TYPE STRIP TFM-DH to SFM-DH SHOWN Surface mount or through-hole tails 8 Rating based on Samtec reference channel. For full SI performance data visit Samtec.com or contact SIG@samtec.com NO. PINS PER ROW 1 TFM to SFM-SH SHOWN G b p s PLATING OPTION LEAD STYLE RECOGNITIONS For complete scope of recognitions see www.samtec.com/quality MATED HEIGHTS LEAD STYLE TFM SFM -02 LEAD STYLE (9.91) .390 (T/H) -01 -03* -11* -13* -21* -23* -31* (11.81) .465 MATED HEIGHT* (5.97) .235 (5.97) .235 (7.75) .305 -01 (7.75) .305 (9.53) .375 B SINGLE ROW C (5.59) .220 (2.77) .109 (7.37) .290 (1.97) .078 * Lower cost plating options. See TFC Series. 01 LEAD STYLE (SMT) (9.14) .360 (1.97) .078 (9.14) .360 (2.77) .109 (5.72) .225 (11.05) .435 (1.97) .078 A DOUBLE ROW (1.14) .045 (5.72) .225 (7.49) .295 (9.27) .365 (11.18) .440 * N/A with 07, -DH or -S row option 01 * Not Available with 07 or -S row option -02 -12* -22* -32* (1.27) .050 (7.37) .290 (2.77) .109 (1.27) .050 DIA -A (SMT or TH) (1.27) .050 (0.46) .018 DIA (11.43) .450 Note: Some sizes, styles and options are non-standard, non-returnable. (2.79) .110 (1.27) .050 x No. of Positions + (3.18) .125 (See website for -REX, -DH, -DS, -WT OAL) 02 (5.59) .220 (1.97) .078 (9.53) .375 *Processing conditions will affect mated height. OTHER SOLUTIONS (1.27) .050 x No. of Positions + (3.18) .125 (4.45) .175 (8.13) .320 = 15 " (0.38 m) Gold on post, Matte Tin on tail (Call Samtec for E.L.P.TM plating option) (Standard sizes) = Locking (-01 & -02 lead style only) MATED HEIGHT* (6.35) .250 LEAD STYLE TFM SFM -01 -03 -11 -13 -21 -23 -31 05, 07, 10, 15, 20, 25, 30, 35, 40, 45, 50 TFML FILE NO. E111594 - 02 - 12 - 22 - 32 (TFM -01 & -02 only) = Standard -L Specify LEAD STYLE from chart 03, 04, 06, 08 TFM B (1.40) .055 A C (0.36) .014 THROUGH-HOLE SURFACE MOUNT (1.42) .056 -LC (SMT or TH) Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec's specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply. (2.35) (0.64) .093 .025 -WT (-01 & -02 ONLY) TFM-105-01-L-D-RA TFML-150-01-L-D-LC TFM-125-01-L-D-WT TFM-110-02-L-DH TFM-110-02-L-D-DS TFM, TFML SERIES Shrouded body for blind mating (1.27 mm) .050" pitch * Passes 10 Year MFG * Locking option Surface mount or through-hole tails * Locking clip option Screw down option ROW OPTION -S Specify only -RA, -RE1 or -RE2 -RA = Right-angle (Lead style -01 only) -D = Alignment Pin = Right-angle Elevated for (1.58 mm) .062" PCB (Requires TFM lead style -01, -D row and -WT) -DH* = Double Horizontal (TFM lead style -02 only) (05 thru 50 positions only) (-TR option only available) Specify only -A, -LC, -DS or -WT Not available with -RA, -RE1 and -RE2 unless otherwise noted. -A -RE1 = Double Row -RE2 -LC = Locking Clip (Manual Placement required) -DS = Right-angle Elevated for (2.36 mm) .093" PCB (Requires TFM lead style -01, -D row and -WT) (0.76) .030 *Screw down option = Dual Screw Down for (1.60 mm) .062" PCB (05, 07, 10, 15, 20, 25, 30, Note: The recommended -REX PCB board layout is different from the -RA. Contact IPG@samtec.com 35, 40 positions only) before designing your board for specifications. (TFM lead styles -01 and -02 only) (Requires -D row option) (Mates with SFM-DS option and SFSD/SFSDT -SS and -DS option only) (Not available with -A, -LC, -WT, -K, -P, -TR) (1.91) .075 (1.27) (0.51) .020 = Weld Tab .050 -RA (TFM lead styles -01 and -02 only) (Required callout for -RE1 & -RE2) (Mates to SFSS/SFSD -SR and -DR option only) (6.48) (05, 07, 10, 15, 20, 25, 30, 35, .255 40, 45, 50 positions only) SMT lead styles only Specify only -K or -P -K = Polyimide Film Pick & Place Pad -P = Plastic Pick & Place Pad (5 positions minimum) (Not available with 5 position with -WT) Specify -TR last -TR = Tape & Reel (Not available with -DS) -FR = Full Reel Tape & Reel (must order max. quantity per reel; contact Samtec for quantity breaks) (Not available with -DS) -WT -DH* (3.81) .150 * Weld tab option Weld tab option OPTION = Single Row (TFM only) (2.26) .089 Mates with SFM for coplanar mating (1.99) .079 -DS (-D, -01 & -02 ONLY) (0.51) .020 -RE1 & -RE2 (1.91) .075 * Note: Weld tab is standard on -DH option. No need to specify -WT. ALSO AVAILABLE (MOQ Required) * Solder nail option * Other sizes * Other platings Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec's specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.