Parameter Value Units Notes
General
Pressure Range 100 kPa ≈15 psi
200 kPa ≈30 psi
700 kPa ≈100 psi
Maximum Pressure 3 x rated pressure
Electrical
@ 25°C (77°F) unless otherwise stated
Excitation 3.0 V 10VDC max.
Input Impedance 5,000 ± 20% Ω
Output Impedance 5,000 ± 20% Ω
Environmental
Electrostatic Damage (ESD) Class 1
Operating Temperature Range –40 to +125 °C –40° to +257°F
Mechanical
(1)
Weight ≈0.10 grams
Media Compatibility Clean, dry air and noncorrosive gases
Parameter Units Min. Typ. Max. Notes
Performance Parameters
(Note 2)
Offset mV/V ±10
Full Scale Output mV 60 ±20
Linearity %FSO ±0.20 3
Hysteresis and Repeatability %FSO 0.1
Thermal Coefficient of Zero %FSO/°C 0.04 4
Thermal Coefficient of Resistance %/°C +0.3 4
Thermal Coefficient of Sensitivity %FSO/°C –0.2 4
Thermal Hysteresis of Zero %FSO 0.1 5
Long-Term Stability of FSO %FSO 0.2 6
Notes: 1. Standard IC industry bake operations should be used prior to surface mount operations. Consult factory for further information.
2. Values measured at 3VDC and 22°C, unless otherwise noted. 3. Best fit straight line. 4. Typical coefficients, between 0° and +70°C.
5. 0° to 70°C. 6. Typical value over one year.
Specifications
g
GE NovaSensor
SM0025 Rev. F 04/03
NPP-301 Series
Surface Mount Pressure Sensor
Sales Terms:
GE NovaSensor standard sales terms apply.
Prices and specifications are subject to change without notice.
Warranty:
GE NovaSensor warrants its products against defects in material and workmanship for
12 months from the date of shipment. Products not subjected to misuse will be repaired
or replaced. GE NovaSensor reserves the right to make changes without further notice to
any products herein. NovaSensor makes no warranty, representation or guarantee
regarding the suitability of its products for any particular application, nor does GE
NovaSensor assume any liability arising out of the application or use of any product or
circuit and specifically disclaims and all liability without limitation consequential or inci-
dental damages. The foregoing warranties are exclusive and in lieu of all other war-
ranties, whether written, oral, implied or statutory. NO IMPLIED STATUTORY WARRANTY
OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE SHALL APPLY.