Part Number: EMG22D 5mm x 10mm LIGHT BAR www.SunLED.com Package Schematics Features Robust package Uniform light disbursement Ideal for backlighting logos or icons Excellent for flush mounting RoHS compliant Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25C) MG (GaP) Unit Reverse Voltage VR 5 V Forward Current IF 25 mA Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS Power Dissipation PD 62.5 Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Storage Temperature 140 mA mW C Lead Solder Temperature [2mm Below Package Base] 260C For 3 Seconds Lead Solder Temperature [5mm Below Package Base] 260C For 5 Seconds Operating Characteristics (TA=25C) EMG22D Apr 15,2011 Emitting Color Green Emitting Material GaP Unit Forward Voltage (Typ.) (IF=20mA) VF 2.2 V Forward Voltage (Max.) (IF=20mA) VF 2.5 V Reverse Current (Max.) (VR=5V) IR 10 uA Wavelength of Peak Emission (Typ.) (IF=20mA) P 565 nm Wavelength of Dominant Emission (Typ.) (IF=20mA) D 568 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) 30 nm C 15 pF Capacitance (Typ.) (VF=0V, f=1MHz) Part Number MG (GaP) Luminous Intensity (IF=20mA) mcd Lens-color Green Diffused min. typ. 6 11 SDSA3729 Wavelength nm P Viewing Angle 2 1/2 565 120 V5 Layout: Maggie L. P. 1/3 Part Number: EMG22D www.SunLED.com 5mm x 10mm LIGHT BAR MG Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity / luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity / Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Apr 15,2011 SDSA3729 V5 Layout: Maggie L. P. 2/3 Part Number: EMG22D www.SunLED.com 5mm x 10mm LIGHT BAR PACKING & LABEL SPECIFICATIONS Apr 15,2011 SDSA3729 V5 Layout: Maggie L. P. 3/3