GS2101M Series 2.7 mm 18 mm Wi-Fi 802.11 b/g/n 25 mm Embedded Product Description The GS2101M module series provides a quick, easy, and cost effective way for device and appliance manufacturers to add Wi-Fi connectivity to their products. The module runs the SEP 2.0 Smart Energy Profile stack and has 3 high bit-rate sigma-delta ADCs for high resolution sensor and measurement devices, making it ideally suited for smart energy and sensor applications. This module provides a low cost, high speed serial to Wi-Fi connection to an embedded design built on an 8/16/32-bit microcontroller, over SDIO interfaces. The GS2101M is an ideal solution for organizations with limited Wi-Fi or RF expertise or for those seeking faster time to market, as it reduces RF design time and removes the burden of testing and certification. The module is IEEE 802.11b/g/n compliant, and meets worldwide regulatory and Wi-Fi Alliance certification requirements. The module runs the full Wi-Fi and TCP/IP networking stacks, completely offloading the host microcontroller. It supports a complete suite of security protocols, also without tasking the host microcontroller, including WPA/ WPA2-Enteprise and Personal security modes, legacy WEP encryption, and upper layer security protocols such as TLS/SS and HTTPs. Alternatively, it can be run selfcontained without a host. For ease of provisioning, the module can be set up simply and easily from a smartphone or laptop through the innovative Limited AP mode or with Wi-Fi Protected Setup (WPS). The module is single sided with castellation on the edges for the I/O connections for soldering down on the product's baseboard. The GS2101M has extended range with industry leading receiver sensitivity. It is available with an U.FL (Universal change) connector to add an external antenna for max ENABLING END-TO-END IOT SOLUTIONS performance or a PCB antenna for convenience while saving space. It is US/Canada (FCC /IC), Europe (CE/ETSI) and Japan (TELEC) certified. The GS2101M module is easily designed into embedded systems, allowing customers to develop a broad array of devices and appliances that connect to other local devices or the Internet over Wi-Fi. Applications include smart energy, smart home, healthcare and fitness, industrial controls, commercial building automation, and consumer electronics. Key Benefits * High resolution sensing and energy measurement * Adds low power, high speed Wi-Fi and Internet connectivity to any device with a microcontroller and serial host interface * Certified module reduces development time, testing and certification, accelerating time to market * Full offload solution minimizes load on host processor * Easy smartphone provisioning with Limited AP or Wi-Fi Protected Set-up (WPS) AVAILABLE FOR EMEA North America Latin America Japan Korea Australia Combine your Cat 1 module with High precision GNSS modules www.telit.com GNSS modules Complete, Ready to Use Access to the Internet of Things * Ultra low power consumption through dynamic power management modes IoT MODULES IoT PLATFORMS IoT CONNECTIVITY IoT KNOW-HOW GS2101M Series Radio Protocol IEEE 802.11 b/g/n Pin Count 40 pins RF Output Power (Typical) +14 dBm (802.11b) Rx Sensitivity (Typical) -91 dBm (802.11b 1Mbps), -88 dBm (802.11g 6Mbps), -88 dBm (802.11n MCS0) RF Operating Frequency 2.4 - 2.495 GHz 65, 58.5, 52, 39, 26, 19.5, 13, 6.5Mbps (802.11n), 54, 48, 36, 24, 18, 12, 9, 6 Mbps (802.11g), 11, 5.5, 2, 1 Mbps (802.11b) Supported Data Rates Antenna Option External antenna (U.FL connector) or Onboard PCB trace antenna Operating Temperature -40 to +85C WPA/WPA2 - Personal, WPA/WPA2 - Enterprise (PEAP, EAP-FAST, EAP-TLS,EAP-TTLS), WEP, TLS/SSL Client and Server, HTTPs Security Protocols Networking Protocols TCP, UDP, IPv4, TLS Client and Server, SNTP client, DHCP Client and Server v4, DHCP Client and Server v6, DNS Client and Server, mDNS, DNS-SD, HTTP Client and Server, and XML Parser Certifications and Compliance FCC, IC, TELEC, CE/ETSI, ROHS, Wi-Fi CERTIFIED I/O Interfaces SPI, UART, SDIO, I2C, I2S,GPIO, ADC (16 bit), ADC (12 bit), JTAG Host Connections UART, SPI, SDIO Internal Flash 4 MB Outline Dimensions 18 mm x 25 mm x 2.7 mm (shield) I/O Voltage 2.7-3.6V Operating Voltage 2.7-3.6V VBAT 1.6-3.6V [02.2017] Models GS2101MIP PCB Antenna GS2101MIE U.FL Telit reserves all rights to this document and the information contained herein. Products, names, logos and designs described herein may in whole or in part be subject to intellectual property rights. The information contained herein is provided "as is". No warranty of any kind, either express or implied, is made in relation to the accuracy, reliability, fitness for a particular purpose or content of this document. This document may be revised by Telit at any time. For most recent documents, please visit www.telit.com Copyright (c) 2017, Telit * Copyright (c) 1990-2017, Python Software Foundation Telit Communications S.p.A. Via Stazione di Prosecco, 5/B I-34010 Sgonico (Trieste), Italy Phone +39 040 4192 200 Fax +39 040 4192 383 E-Mail EMEA @ telit.com Telit Wireless Solutions Inc. 3131 RDU Center Drive, Suite 135 Morrisville, NC 27560, USA Phone +1 888 846 9773 or +1 919 439 7977 Fax +1 888 846 9774 or +1 919 840 0337 E-Mail NORTHAMERICA @ telit.com Telit Wireless Solutions Inc. Rua Paes Leme, 524, Conj, 126 05424-101, Pinheiros Sao Paulo-SP-Brazil Phone +55 11 3031 5051 Fax +55 11 3031 5051 E-Mail LATINAMERICA @ telit.com Join the Telit Technical Forum For a quicker and more rewarding integration experience join the Telit Technical Forum. There you can browse the first open forum covering all IoT topics, get direct support by region (EMEA, North America, Latin America, APAC), take part in this quickly growing IoT community and exchange experiences. Telit Wireless Solutions Co., Ltd. 8th Fl., Shinyoung Securities Bld. 6, Gukjegeumyung-ro8-gil, Yeongdeungpo-gu Seoul, 150-884, Korea Phone +82 2 368 4600 Fax +82 2 368 4606 E-Mail APAC @ telit.com www.telit.com www.telit.com/techforum www.telit.com/facebook www.twitter.com/Telit_IoT