SKQG 5.2mm Square Low-profile (Surface Mount Type) TM Switch TACT Available in two types, 0.8mm height without stem or 1.5mm height with stem Typical Specifications Items Specifications 50mA 12V DC Ratingmin. 10A 1V DC Initial contact resistance 100m max. Travelmm Sharp Feeling Ratingmax. 0.25 Soft Feeling Product Line Operating force SKQGAEE010 0.98N SKQGAAE010 1.57N SKQGACE010 2.55N SKQGAFE010 0.98N SKQGABE010 1.57N SKQGADE010 2.55N SKQGAKE020 3.43N Operating direction Operating life 5mA 5V DC Minimum order unitpcs. Japan Export Drawing No. Without stem 5,000 5,000 1 With stem 4,000 4,000 2 Stem 500,000 cycles Top push Surface Mount Type 50,000 cycles Snap-in Type Product No. 500,000 cycles 100,000 cycles Radial Type 100,000 cycles Packing Specifications Taping Series Unit:mm Number of packagespcs. 1 reel SKQGAA SKQGAC SKQGAE 5,000 SKQGAB SKQGAD SKQGAF SKQGAK 4,000 Tape width Export package measurementsmm 1 case / Japan 1 case / export packing mm 50,000 50,000 12 40,000 Reel size 395x395x205 40,000 Note For reels of 330mm diameter, please inquire. Refer to P.265 for soldering conditions. 215 SKQG 5.2mm Square Low-profile (Surface Mount Type) TACT SwitchTM Dimensions No. Unit:mm Photo PC board mounting hole dimensions Viewed from switch mounting face Style Without stem type 1 4 5.2 6.4 4.8 3 2.6 Soft Feeling 1 Prohibited area of copper tracks 5.2 0.5 Sharp Feeling o3 3.7 2 2 4.4 Snap-in Type 0.8 8 Surface Mount Type With stem type 1 4 5.2 6.4 2 4.4 Stem 0.8 Circuit Diagram 216 1 2 3 4 1.5 1.2 8 4.8 3 2.6 Radial Type 2 Prohibited area of copper tracks 5.2 0.5 o2 3.7 2 TACT SwitchTM List of Varieties TACT SwitchTM Sharp Feeling Type Type Surface Mount SKSH Series SKRW SKRM SKRB SKRR SKQG Low-profile and long life Low-profile SKTC SKSK Photo Features Low-profile Double action Sharp Feeling Soft Feeling Water-proof -- -- -- -- -- -- -- Dust-proof -- -- -- -- -- -- -- IP standard -- -- -- -- -- -- 67 equivalency -- Top push Side push -- -- -- -- -- -- -- -- W 3.3 4.8 3.5 2.9 4.5 3.4 D 3.7 2.2 3.2 0.4 0.55 0.62 0.6 Operating direction Snap-in Type Dimensions mm H 0.35 7.5 5.2 7 0.6 0.8/1.5 Surface Mount Type 1N max. 1N to 2N Operation force coverage See the relevant pages for respective product descriptions 2N to 3N 3N to 4N 4N to 5N Radial Type Travelmm Ground terminal Operating temperature range Automotive use 0.15 -- 0.15/0.2 -- -- -30 to 85 -- -- -- -- -40 to 85 -- See the relevant pages for respective product descriptions 0.25 -- -40 to +90 -- -- -30 to 85 -- -- Life Cycle Electrical performance Ratingmax. Resistive load 50mA 12V DC Ratingmin. Resistive load 10A 1V DC Insulation resistance 100M min. 100V DC 1min. Voltage proof 100V AC 1min. 100V AC 1min. Vibration 10 to 55 to 10Hz/min., the amplitude is 1.5mm for all the frequencies, in the 3 direction of X, Y and Z for 2 hours respectively Lifetime Shall be in accordance with individual specifications. Cold -40 96h Dry heat 90 96h Damp heat 60, 90 to 95%RH 96h Durability Environmental performance 250V AC 1min. Page 210 211 212 213 214 215 217 218 WWidth. The most outer dimension excluding terminal portion. D Depth. The most outer dimension excluding terminal portion. H Height. The minimum dimension if there are variances. TACT SwitchTM Soldering Conditions 265 TACT SwitchTM Cautions 266 Notes 1. The automotive operating temperature range to be individually discussed upon request. 2. Indicates applicability to all products in the series, while indicates applicability to some products in the series. 190 TACT SwitchTM Soldering Conditions TM Switch TACT Condition for Reflow Available for Surface Mount Type. 1. Temperature measurement: Thermocouple 0.1 to 0.2 CAKor CCTat solder joints copper foil surface. A heat resistive tape should be used to fix thermocouple. 2. Temperature profile Temperature (C ) 260C max. 3 sec max. Sharp Feeling 230C 180 150 Time Soft Feeling 120 sec max. pre-heating 40s max. 3 to 4min. Time inside soldering equipment Manual Soldering Available for Snap-in Type and Radial Type. Condition Flux built-up Mounting surface should not be exposed to flux Preheating temperature Ambient temperature of the soldered surface of PC board. 100 max. Items Condition Soldering temperature 350 max. Duration of soldering 3s max. Capacity of soldering iron 60W max. Preheating time 60s max. Soldering temperature 260 max. Duration of immersion 5s max. Items Condition Number of soldering 2times max. Soldering temperature 360 max. Duration of soldering 3s max. Capacity of soldering iron 60W max. SKHH, SKPD Series Radial Type Items Surface Mount Type Conditions for Auto-dip Snap-in Type Notes 1. The above temperature shall be measured of the top of switch. There are cases where the PC board's temperature greatly differs from that of the switch, depending on the material, size, thickness of PC boards and others. The above-stated conditions shall also apply to switch surface temperatures. 2. Soldering conditions differ depending on reflow soldering machines. Prior verification of soldering condition is highly recommended. SKHH, SKHW, SKRG, SKPD Series Items Condition Flux built-up Mounting surface should not be exposed to flux Preheating temperature Ambient temperature of the soldered surface of PC board. 110 max. Items Condition Preheating time 60s max. Soldering temperature 350 max. Soldering temperature 260 max. Duration of soldering 3s max. Duration of immersion 5s max. Capacity of soldering iron 20W max. Number of soldering 2times max. SKTD, SKTG, SKQJ, SKQK, SKEG Series SKQJ, SKQK, SKEG Series Items Condition Flux built-up Mounting surface should not be exposed to flux Preheating temperature Ambient temperature of the soldered surface of PC board. 100 max. Preheating time 45s max. Soldering temperature 255 max. Duration of immersion 5s max. Number of soldering 2times max. Notes 1. Prevent flux penetration from the top side of the TACT SwitchTM. 2. Switch terminals and a PC board should not be coated with flux prior to soldering. 3. The second soldering should be done after the switch is stable with normal temperature. 4. Use the flux with a specific gravity of min 0.81. EC-19S-8 by TAMURA Corporation, or equivalents. 265