Current Probes Key Features * ProBus active probe interface with * Autozero and degauss capabilities * * * * * * automatic scaling in A/div built into instrument's user interface CP030 Teledyne LeCroy current probes do not require the breaking of a circuit or the insertion of a shunt to make accurate and reliable current measurements. Based on a combination of Hall effect and transformer technology, Teledyne LeCroy current probes are ideal for making accurate AC, DC, and impulse current measurements. Arms continuous current - 30 Apeak current - 50 - 50 MHz bandwidth Wide Range of Applications Fully Integrated Teledyne LeCroy current probes are CP030A wide range of applications. The full All Teledyne LeCroy current probes are powered through the Teledyne LeCroy ProBus(R) connection and require no additional hardware. Along with providing power, the ProBus connection allows the current probe and oscilloscope to communicate, resulting in current waveforms automatically displayed on screen in Amps, and calculated power traces scaled correctly in Watts. This full integration also allows - - - - 30 Arms continuous current 50 Apeak current 50 MHz bandwidth 1 mA/div sensitivity CP031 Arms continuous current - 30 50 peak current - 100AMHz bandwidth - CP031A Arms continuous current - 30 50 peak current - 100AMHz bandwidth - 1 mA/div sensitivity - CP150 Arms continuous current - 150 Apeak current - 500 - 10 MHz bandwidth CP500 Arms continuous current - 500 700 current - 2 MHzApeak bandwidth - available in a variety of models for a range of Teledyne LeCroy current probes includes models with bandwidths up to 100 MHz, peak currents up to 700 A and sensitivities to 1 mA/div. Teledyne LeCroy current probes are often used in applications such as the design and test of switching power supplies, motor drives, electric vehicles, and uninterruptible power supplies. for Degauss and Autozero functions to be done directly from the oscilloscope's High Sensitivity user interface. The CP030A and CP031A provide a high Deskew Calibration Source sensitivity of 1 mA/div. This allows for more precise low current measurements on Teledyne LeCroy oscilloscopes. When used with HDO high definition oscilloscopes with HD4096 technology, users will obtain highly accurate, low current waveforms with unmatched 12-bit resolution for improved debug and analysis. The DCS025 deskew calibration source has both voltage and current time-aligned signals, which enables the precise deskew of voltage and current probes. Most voltage probes along with 30, 150 and 500A current probes are compatible with the DSC025. CP031/ CP031A CP030 / CP030A 160 35 35 35 35 30 35 30 35 140 30 30 25 30 25 30 120 25 25 25 25 20 Current (Arms) Current 20 15 (Arms) Current 20 (Arms) 20 Current 15 (Arms) 15 10 15 10 15 10 10 5 10 5 10 5 5 0 5 0 5 0 0 0 0 20 15 Current (Arms) 20 Frequency (Hz) Frequency (Hz) 1 0.1 10 10 10 10 1 1 1 1 0.01 0.01 0.01 0.01 0.001 0.001 0.001 0.001 Frequency (Hz) Frequency (Hz) Frequency (Hz) Insertion Impedance vs. Frequency (typical) 2 40 20 0 Frequency (Hz) Frequency (Hz) Maximum Input Current vs. Frequency* Insertion Impedance 0.1 Insertion Impedance 0.1 0.001 60 Frequency (Hz) Insertion Impedance 0.1 Insertion Impedance 0.1 0.01 80 Frequency (Hz) Frequency (Hz) Maximum Input Current vs. Frequency 10 100 Current (Arms) 1 10 1 Insertion Impedance 0.1 Insertion Impedance 0.1 0.01 0.01 0.001 0.001 Frequency (Hz) Frequency (Hz) Frequency (Hz) Frequency (Hz) Insertion Impedance vs. Frequency* (typical) *This performance does not apply to CP030-3M model. CP150 CP500 160 35 160 140 30 140 120 25 120 100 20 Current Current (Arms) 100 (A80 rms) Current (Arms) 80 Current (Arms) Current (Arms) 15 60 60 40 10 40 20 5 20 0 0 0 10 10 0 Frequency (Hz) Frequency Frequency (Hz) (Hz) Frequency (Hz) 550 500 550 450 500 400 450 350 400 300 350 250 300 200 250 150 200 100 150 50 100 0 50 100 1k 100 1k 1010 k(Hz) Frequency 100 100 k 1M 1k 100 k 100 1M 1k Frequency (Hz) Frequency (Hz) Maximum Input Current vs. Frequency* 1 Current (Arms) Current (Arms) 550 160 500 550 140 450 500 120 400 450 350 400 100 Current 300 350 (Arms) 80 250 300 200 250 60 150 200 40 100 150 20 50 100 0 0 50 10 k 0 10 Maximum Input Current vs. Frequency 10 1 0.100 0.100 0.100 0.100 1010 Mk 10 M k(Hz)(H 10 Frequency Frequency Frequency (Hz) 1 1 0.1 0.1 Insertion 0.1 Insertion Impedance Impedance Insertion Impedance Insertion Impedance Insertion Impedance 0.1 0.01 0.01 0.01 0.001 0.001 0.010 0.010 0.001 0.001 0.001 Insertion Impedance Insertion Impedance Insertion Impedance 0.010 0.010 0.001 0.01 0.001 0.001 Frequency (Hz) FrequencyFrequency (Hz) (Hz) Frequency (Hz) Frequency Frequency (Hz) ( Frequency (Hz) Frequency (Hz) Frequency (Hz) Frequency (Hz) Insertion Impedance vs. Frequency* (typical) *This performance does not apply to CP150-6M model. Insertion Impedance vs. Frequency (typical) 3 SPECIFICATIONS & ORDERING INFORMATION Specifications Electrical Characteristics* CP030A CP030 (CP030-3M) Max. Continuous Input Current Bandwidth CP031 CP031A CP500 CP150 (CP150-6M) 30 Arms 150 Arms 500 Arms 10 MHz 100 MHz 2 MHz (5 MHz) 35 ns 3.5 ns 175 ns ( 70 ns) 300 Apeak (non-continuous); 700 Apeak 50 Apeak (non-continuous) 500 Apeak 30 s (non-continuous) 0.1 V/A & 1 V/A 0.1 V/A 0.1 V/A & 1 V/A 0.01 V/A 50 MHz (10 MHz) 7 ns ( 35 ns) Rise Time (typical) Max. Peak Current Output Voltage Max Continuous Input Current at 1 V/A (100mA/div or less) Offset Range at 1V/A (100mA/div or less) Minimum Sensitivity Low-Frequency Accuracy AC Noise at 20 MHz BWL Coupling 0.1 V/A General Characteristics Cable Length - 5A - 5A - - 5 A - 5 A - 10 mA/div 1 mA/div 10 mA/div 100 mA/div 2.5 mA 150 A 2.5 mA 1 mA/div 1% 150 A AC, DC, GND 1.5 m (3 m) 240 g (290 g) Weight Max. Conductor Size (Diameter) Interface Usage Environment Operating Temperature Max. Relative Humidity Max. Altitude Maximum Insulated Wire Voltage 1.5 m 260 g 240 g 260 g 5 mm 6.0 mA 8.0 mA 2m (6 m) 500 g (600 g) 6m 630 g 20 mm ProBus, 1 M only Indoor 0 C to 40 C 80% 2000 m 300 V CAT I 600 V CAT II, 300 V CAT III * Electrical Characteristics Guaranteed at 23 C 3 C CP03x, CP150, and CP500 probes (and long cable versions of these) are compatible with any Teledyne LeCroy oscilloscope with a ProBus interface running firmware version 4.3.1.1 or great. CP03xA probes are compatible with most Teledyne LeCroy oscilloscopes with a ProBus interface running X-StreamTM firmware version 7.8.x.x or later, including WaveSurfer Xs-A, MXs/MXs-A/MXs-B, and 10; HDO4000, 6000, 8000, and 9000; MDA800, HRO/WaveRunner 6 Zi, WaveRunner 8000, Xi/Xi-A/ MXi/MXi-A, WavePro/SDA/DDA 7 Zi/Zi-A; WaveMaster/SDA/DDA 8 Zi/Zi-A/Zi-B, and LabMaster 9 Zi-A series. WavePro 7000/7000A series are compatible if they are running Windows XP Professional and X-StreamTM firmware version 7.8.x.x or later. WaveSurfer Xs series must be upgraded to Windows XP Professional. Contact your local service center regarding upgrades. Ordering Information Product Description Product Code 30 A; 50 MHz Current Probe - AC/DC; 30 Arms; 50 A Peak Pulse, 1.5 meter cable 30A; 10 MHz Current Probe - AC/DC, 30 Arms; 50 A Peak Pulse, 3 meter cable (not EMC compliant) 30 A; 50 MHz High Sensitivity Current Probe - AC/DC; 30 Arms; 50 A Peak Pulse, 1.5 meter cable 30 A; 100 MHz Current Probe - AC/DC; 30 Arms; 50 A Peak Pulse, 1.5 meter cable 30 A; 100 MHz High Sensitivity Current Probe - AC/DC; 30 Arms; 50 A Peak Pulse, 1.5 meter cable 150 A; 10 MHz Current Probe - AC/DC; 150 Arms; 500 A Peak Pulse, 2 meter cable 150 A; 5 MHz Current Probe - AC/DC; 150 Arms; 500 A Peak Pulse, 6 meter cable (not EMC compliant) 500 A; 2 MHz Current Probe - AC/DC; 500 Arms; 700 A Peak Pulse, 6 meter cable Deskew Calibration Source CP030 CP030-3M CP030A CP031 CP031A CP150 CP150-6M CP500 DCS025 Customer Service Teledyne LeCroy oscilloscopes and probes are designed, built, and tested to ensure high reliability. In the unlikely event you experience difficulties, our digital oscilloscopes are fully warranted for three years and our probes are warranted for one year. This warranty includes: No charge for return shipping Long-term 7-year support Upgrade to latest software at no charge * * * 1-800-5-LeCroy teledynelecroy.com Local sales offices are located throughout the world. Visit our website to find the most convenient location. (c) 2017 Teledyne LeCroy, Inc. All rights reserved. Specifications, prices, availability, and delivery subject to change without notice. Product or brand names are trademarks or requested trademarks of their respective holders. current-probes_ds_25jul17