© KEMET Electronics Corporation • PO Box 5928 • Greenville, SC 29606 • www.kemet.com
14
C0G (NP0) capacitors which exhibit little change in capa-
citance with variations in temperature, are used in RF
oscillators, precision timing circuits, wave filters and
other circuits requiring a predictable linear temperature
coefficient.
PART NUMBER AND ORDERING INFORMATION
TEST LEVEL
S = KEMET standard screening
A = MIL-PRF-20, Group A Test (COG)
A = MIL-PRF-39014, Group A Test (X7R)
X = Special
LEAD MATERIALS
G = Gold plated copper clad steel
W = Solder coated copper
clad steel
CAPACITANCE TOLERANCES
J = ±5%
K = ±10%
M = ±20%
Other tolerances available upon request
CAPACITANCE CODE
3 Digit code system expressed in
picofarads (pF)
103 = 10,000pF
151 = 150pF
6R8 = 6.8pF
PRODUCT FAMILY
S = Standard Axial and
Radial Capacitors
TEMP. CHARACTERISTIC
C = C0G (NP0)
R = X7R (BX)
LEAD CONFIGURATION
A = Axial
R = Radial
STYLE
Case Size
See data sheet for detail dimensions
S C R 05 B 103 K G S
VOLTAGE RATING
B = 50vdc
D = 100vdc
F = 200vdc
S = Special
MARKING
Manufacturer’s ID KEC
Capacitance 106J
Voltage 50V
Date Code 123
BX and X7R capacitors are used in coupling circuits (IF and
RF); for bypassing and decoupling in computers and stereo
sytems; power supply line filtering and frequency discrimina-
tion.
C0G X7R
High Temperature Standard (+125°C)
Axial and Radial Ceramic Cased Capacitors (C3)
SCR/SRR/SCA/SRA Series
INSTALLATION:
Parts should be soldered using a heat sink between the soldering point and the part using a soldering iron rated between 18-
30 watts. Soldering temperature should not exceed +300°C. For wave soldering, the parts should be slowly heated to +150°C
and, after soldering, be allowed to cool down slowly to +90°C to preclude thermal shocking of the parts.
Note: Solderability testing is not required
for gold leaded parts.
© KEMET Electronics Corporation • PO Box 5928 • Greenville, SC 29606 • www.kemet.com 15
High Temperature Standard (+125°C)
Axial and Radial Ceramic Cased Capacitors (C3)
SCR/SCA Series
AXIAL
All Dimensions
in Inches (mm)
RADIAL
All Dimensions
in Inches (mm)
C0G DIELECTRIC
AXIAL
STYLE 16 25 39 50 69
Cap
LMAX .170 (4.32) .270 (6. 86) .400 (10.16) .520 (13.21) .720 (18.29)
W MAX .080 (2.03) .100 (2.54) .150 (3.81) .265 (6.73) .370 (9.40)
TMAX .080 (2.03) .100 (2.54) .150 (3.81) .160 (4.06) .160 (4.06)
S--- --- --- --- ---
d.020 ± .002
(.508 ± .051)
.020 ± .002
(.508 ± .051)
.025 ± .002
(.635 ± .051)
.025 ± .002
(.635 ± .051)
.025 ± .002
(.635 ± .051)
Cap
Code
WVDC WVDC WVDC WVDC WVDC
50 100 200 50 100 200 50 100 200 50 100 200 50 100 200
5.6pF 569
6.8 689
8.2 829
10 100
12 120
15 150
18 180
22 220
27 270
33 330
39 390
47 470
56 560
68 680
82 820
100 101
120 121
150 151
180 181
220 221
270 271
330 331
390 391
470 471
560 561
680 681
820 821
1000 102
1200 122
1500 152
1800 182
2200 222
2700 272
3300 332
3900 392
4700 472
5600 562
6800 682
8200 822
0.01 μF 103
0.012 123
0.015 153
0.018 183
0.022 223
0.027 273
0.033 333
0.039 393
0.047 473
0.056 563
0.068 683
0.082 823
0.10 104
0.12 124
0.15 154
0.18 184
0.22 224
RADIAL
05 06 07 08 09
.200 (5.08) .300 (7.62) .300 (7.62) .500 (12.70) .500 (12.70)
.200 (5.08) .300 (7.62) .300 (7.62) .500 (12.70) .500 (12.70)
.100 (2.54) .100 (2.54) .150 (3.81) .100 (2.54) .150 (3.81)
.200 ± .015
(5.08 ±.38)
.200 ± .015
(5.08 ±.38)
.200 ± .015
(5.08 ±.38)
.400 ± .015
(10.16 ± .38)
.400 ± .015
(10.16 ± .38)
.020 ± .002
(.508 ± .051)
.020 ± .002
(.508 ± .051)
.020 ± .002
(.508 ± .051)
.025 ± .002
(.635 ± .051)
.025 ± .002
(.635 ± .051)
WVDC WVDC WVDC WVDC WVDC
50 100 200 50 100 200 50 100 200 50 100 200 50 100 200
S
© KEMET Electronics Corporation • PO Box 5928 • Greenville, SC 29606 • www.kemet.com
16
High Temperature Standard (+125°C)
Axial and Radial Ceramic Cased Capacitors (C3)
SRR/SRA Series
AXIAL
All Dimensions
in Inches (mm)
RADIAL
All Dimensions
in Inches (mm)
X7R DIELECTRIC
AXIAL
STYLE 16 25 39 50 69
Cap
LMAX .170 (4.32) .270 (6. 86) .400 (10.16) .520 (13.21) .720 (18.29)
WMAX .080 (2.03) .100 (2.54) .150 (3.81) .265 (6.73) .370 (9.40)
TMAX .080 (2.03) .100 (2.54) .150 (3.81) .160 (4.06) .160 (4.06)
S --- --- --- --- ---
d.020 ± .002
(.508 ± .051)
.020 ± .002
(.508 ± .051)
.025 ± .002
(.635 ± .051)
.025 ± .002
(.635 ± .051)
.025 ± .002
(.635 ± .051)
Cap
Code
WVDC WVDC WVDC WVDC WVDC
50 100 200 50 100 200 50 100 200 50 100 200 50 100 200
100pF 101
120 121
150 151
180 181
220 221
270 271
330 331
390 391
470 471
560 561
680 681
820 821
1000 102
1200 122
1500 152
1800 182
2200 222
2700 272
3300 332
3900 392
4700 472
5600 562
6800 682
8200 822
0.01 μF 103
0.012 123
0.015 153
0.018 183
0.022 223
0.027 273
0.033 333
0.039 393
0.047 473
0.056 563
0.068 683
0.082 823
0.10 104
0.12 124
0.15 154
0.18 184
0.22 224
0.27 274
0.33 334
0.39 394
0.47 474
0.56 564
0.68 684
0.82 824
1.0 105
1.2 125
1.5 155
1.8 185
2.2 225
2.7 275
3.3 335
3.9 395
4.7 475
5.6 565
6.8 685
RADIAL
05 06 07 08 09
.200 (5.08) .300 (7.62) .300 (7.62) .500 (12.70) .500 (12.70)
.200 (5.08) .300 (7.62) .300 (7.62) .500 (12.70) .500 (12.70)
.100 (2.54) .100 (2.54) .150 (3.81) .100 (2.54) .150 (3.81)
.200 ± .015
(5.08 ±.38)
.200 ± .015
(5.08 ±.38)
.200 ± .015
(5.08 ±.38)
.400 ± .015
(10.16 + .38)
.400 ± .015
(10.16 + .38)
.020 ± .002
(.508 ± .051)
.020 ± .002
(.508 ± .051)
.020 ± .002
(.508 ± .051)
.025 ± .002
(.635 ± .051)
.025 ± .002
(.635 ± .051)
WVDC WVDC WVDC WVDC WVDC
50 100 200 50 100 200 50 100 200 50 100 200 50 100 200
S
