SBE803 Ordering number : ENN6331A SBE803 Schottky Barrier Diode 90V, 200mA Rectifier Applications * High frequency rectification (switching regulators, converters, choppers). Features * * * * Low forward voltage (VF max=0.7V). Fast reverse recovery time (trr max=10ns). Low switching noise. Low leakage current and high reliability due to highly reliable planar structure. Specifications Absolute Maximum Ratings at Ta=25C (Value per element) Parameter Symbol Conditions Ratings Unit Repetitive Peak Reverse Voltage VRRM 90 Nonrepetitive Peak Reverse Surge Voltage VRSM IO 95 V 200 mA Average Output Current Surge Forward Current Junction Temperature IFSM Tj Storage Temperature Tstg 50Hz sine wave,1 cycle V 5 A --55 to +125 C --55 to +125 C Electrical Characteristics at Ta=25C (Value per element) Parameter Symbol Conditions Ratings min typ max Reverse Voltage VR IR=200A Forward Voltage VF IR IF=200mA 0.7 V VR=45V 50 A C VR=10V,f=1MHz Reverse Current Interterminal Capacitance Reverse Recovery Time Thermal Resistance Trr Rth(j-a) 90 Unit V 10 IF=IR=100mA,See specified Test Circuit. Mounted on a ceramic board pF 10 ns 110 C/W (600mm2x0.8mm) Marking : SB Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 32505TN (PC)/O0899GI (KT) No.6331-1/3 SBE803 Package Dimensions unit : mm 1294A 0.15 0.4 4 3 0.2 2.8 0.05 0.6 1.6 0.6 5 2 1 : Cathode 2 : Cathode 3 : Anode 4 : No Contact 5 : Anode 0.95 0.7 0.9 0.2 2.9 SANYO : CPH5 Electrical Connection 1 Duty10% 1 : Cathode 2 : Cathode 3 : Anode 4 : No Contact 5 : Anode 3 10s 50 100 10 Top view 2 10mA 4 100mA 5 trr Specified Test Circuit 100mA 1 --5V IF -- VF 1.0 Reverse Current, IR -- mA 3 2 0.1 10 0 C 7 5 C 75 C 3 2 C 25 0.01 7 5 50 Ta= 1 Forward Current, IF -- A 7 5 IR -- VR 1.0 7 5 3 2 Ta=125C 100C 0.1 7 5 75C 3 2 0.01 7 5 3 2 50C 25C 0.001 7 5 25C 3 2 trr 3 2 0.001 0.0001 0 0.2 0.4 0.6 Forward Voltage, VF -- V 0.8 1.0 IT01112 0 10 20 30 40 50 60 Reverse Voltage, VR -- V 70 80 90 IT01113 No.6331-2/3 PF(AV) -- IO 0.20 0.18 0.16 0.12 0.10 Rectangular wave 0.06 360 0.04 Sine wave 0.02 0 0 0.05 0.10 0.15 0.20 180 360 0.25 Average Forward Current, IO -- A Surge Forward Current , IFSM(Peak) -- A 0.30 IT01114 IS -- t 7 f=1MHz 7 0.14 0.08 C -- VR 100 Rectangular wave =60 Rectangular wave =120 Rectangular wave =180 Sine wave =180 Interterminal Capacitance, C -- pF Average Forward Power Dissipation, PF(AV) -- W SBE803 5 3 2 10 7 5 3 2 1.0 1.0 2 3 5 7 10 2 3 5 Reverse Voltage, VR -- V 7 100 IT01115 Current waveform 50Hz sine wave 6 Is 20ms t 5 4 3 2 1 0 7 0.01 2 3 5 7 0.1 2 3 Time, t -- s 5 7 1.0 2 3 IT01116 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of March, 2005. Specifications and information herein are subject to change without notice. PS No.6331-3/3