B39431B3771Z810 - EPCOS AG - Product.Network

EPCOS AG 2006. Reproduction, publication and dissemination of this data sheet, enclosures

hereto and the information contained therein without EPCOS’ prior express consent is prohibited.

SAW Components

SAW filter

Short range devices

Series/type:

Ordering code: B3771

B39431B3771Z810

Date:

Version: July 04, 2006

2.0

2July 04, 2006

B3771

434.42 MHz

Please read

cautions and warnings and

important notes

at the end of this document.

SAW Components

SAW filter

Data sheet

Application

■Low-loss RF filter for remote control receivers

■Balanced and unbalanced operation possible

Features

■Package size 3.8 x 3.8 x 1.5 mm3

■Package code QCC8B

■RoHS compatible

■Approximate weight 0.07 g

■Package for Surface Mount Technology

(SMT)

■Ni, gold-plated terminals

■Lead free soldering compatible with J - STD20C

■Passivation layer Elpas

■AEC-Q200 qualified component family

■Electrostactic Sensitive Device (ESD)

Pin configuration1)

■1 Input ground (recommended) or input

■2 Input (recommended) or input ground

■5 Output (recommended) or output ground

■6 Output ground (recommended) or output

■4,8 Case - ground

■3,7 to be grounded

1) The recommended pin configuration usually offers best

suppression of electrical crosstalk. The filter characteris-

tics refer to this configuration.

3July 04, 2006

B3771

434.42 MHz

SAW Components

SAW filter

Data sheet

Please read

cautions and warnings and

important notes

at the end of this document.

Characteristics

Temperature range for specification: TA= –40 ˚C to +95 ˚C

Terminating source impedance: ZS=50Ωand matching network

Terminating load impedance: ZL=50Ωand matching network

min. typ.

@ 25 ˚C max.

Center frequency fC— 434.42 — MHz

(center frequency between 3 dB points)

Minimum insertion attenuation αmin

including loss in matching elements — 1.9 3.0 dB

excluding loss in matching elements — 1.4 2.5 dB

Pass band (relative to αmin)

434.26 ... 434.58 MHz — 0.5 2.0 dB

434.24 ... 434.60 MHz — 0.7 3.0 dB

434.20 ... 434.64 MHz — 1.0 6.0 dB

Filter bandwidth αrel ≤ 3 dB 0.62 0.68 0.74 MHz

Relative attenuation (relative to αmin)αrel

10.00 ... 414.50 MHz 52 56 — dB

414.50 ... 424.00 MHz 48 52 — dB

424.00 ... 432.22 MHz 29 34 — dB

432.22 ... 432.62 MHz 24 33 — dB

432.62 ... 433.60 MHz 17 21 — dB

435.42 ... 442.50 MHz 18 21 — dB

442.50 ... 500.00 MHz 40 45 — dB

500.00 ... 700.00 MHz 50 55 — dB

700.00 ... 805.00 MHz 45 50 — dB

805.00 ... 1000.00 MHz 60 65 — dB

1000.00 ... 2500.00 MHz 55 60 — dB

Impedance for pass band matching1)

1) Impedance for passband matching bases on an ideal, perfect matching of the SAW filter to source- and to load

impedance (here 50 Ohm). After removal of the SAW filter the input impedance of the input and output match-

ing network is calculated. The conjugate complex value of these characteristic impedances are the input and

output impedances for flat passband. For more details we refer to EPCOS application note #4.

Input: ZIN =R

IN || CIN — 240 || 2.4 — Ω || pF

Output: ZOUT =R

OUT || COUT —240 || 2.4 —Ω || pF

4July 04, 2006

B3771

434.42 MHz

Please read

cautions and warnings and

important notes

at the end of this document.

SAW Components

SAW filter

Data sheet

Maximum ratings

Operable temperature range TA–45/+120 ˚C

Storage temperature range Tstg –45/+120 ˚C

DC voltage VDC 6 V

Source power PS10 dBm source impedance 50 Ω

5July 04, 2006

B3771

434.42 MHz

SAW Components

SAW filter

Data sheet

Please read

cautions and warnings and

important notes

at the end of this document.

Matching network to 50 Ω(element values depend on pcb layout and equivalent circuit)

Minimising the crosstalk

Foragoodultimaterejectionalowcrosstalkisnecessary.Lowcrosstalkcanberealisedwithagood

RF layout. The major crosstalk mechanism is caused by the “ground-loop” problem.

Grounding loops are created if input-and output transducer GND are connected on the top-side of

the PCB and fed to the system grounding plane by a common via hole. To avoid the common

ground path, the ground pin of the input- and output transducer are fed to the system ground plane

(bottom PCB plane) by their own via hole. The transducers’ grounding pins should be isolated from

the upper grounding plane.

A common GND inductivity of 0.5nH degrades the ultimate rejection (crosstalk) by 20dB.

The optimised PCB layout, including matching network for transformation to 50 Ohm, is shown

here. In this PCB layout the grounding loops are minimised to realise good ultimate rejection

Optimised PCB layout for SAW filters in QCC8B package, pinning 2,5 (top side, scale 1:1)

The bottom side is a copper plane (system ground area). The input and output grounding pins are

isolated and connected to the common ground by separated via holes.

For good contact of the upper grounding area with the lower side it is necessary to place enough

via holes.

Ls1 = 33 nH

Ls2 = 33 nH

6July 04, 2006

B3771

434.42 MHz

Please read

cautions and warnings and

important notes

at the end of this document.

SAW Components

SAW filter

Data sheet

Transfer function

Transfer function (wideband)

7July 04, 2006

B3771

434.42 MHz

SAW Components

SAW filter

Data sheet

Please read

cautions and warnings and

important notes

at the end of this document.

Transfer function (ultimate rejection)

8July 04, 2006

B3771

434.42 MHz

Please read

cautions and warnings and

important notes

at the end of this document.

SAW Components

SAW filter

Data sheet

References

Type B3771

Ordering code B39431B3771Z810

Marking and package C61157-A7-A46

Packaging F61074-V8167-Z000

Date codes L_1126

S-parameters B3771_SB.s2p

B3771_WB.s2p

Soldering profile S_6001

RoHS compatible defined as compatible with the following documents:

"DIRECTIVE2002/95/ECOFTHEEUROPEANPARLIAMENT

AND OF THE COUNCIL of 27 January 2003 on the restriction

of the use of certain hazardous substances in electrical and

electronic equipment. 2005/618/EC from April 18th, 2005,

amending Directive 2002/95/EC of the European Parliament

and of the Council for the purposes of establishing the maxi-

mum concentration values for certain hazardous substances in

electrical and electronic equipment."

For further information please contact your local EPCOS sales office or visit our webpage at

ww.epcos.com .

Published by EPCOS AG

Surface Acoustic Wave Components Division

P.O. Box 80 17 09, 81617 Munich, GERMANY

EPCOS AG 2006. This brochure replaces the previous edition.

For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or

he international Representatives.

Due to technical requirements components may contain dangerous substances. For information on

he type in question please also contact one of our Sales Offices.

9July 04, 2006

Important notes

he following applies to all products named in this publication:

1. Some parts of this publication contain statements about the suitability of our products for

certain areas of application. These statements are based on our knowledge of typical

requirements that are often placed on our products in the areas of application concerned. We

nevertheless expressly point out that such statements cannot be regarded as binding

statements about the suitability of our products for a particular customer application.

As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar

with them than the customers themselves. For these reasons, it is always ultimately incum-

bent on the customer to check and decide whether an EPCOS product with the properties

described in the product speciﬁcation is suitable for use in a particular customer application.

2. We also point out that in individual cases, a malfunction of passive electronic compo-

nents or failure before the end of their usual service life cannot be completely ruled

out in the current state of the art, even if they are operated as speciﬁed. In customer

applications requiring a very high level of operational safety and especially in customer appli-

cations in which the malfunction or failure of a passive electronic component could endanger

human life or health (e.g. in accident prevention or life-saving systems), it must therefore be

ensured by means of suitable design of the customer application or other action taken by the

customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is

sustained by third parties in the event of malfunction or failure of a passive electronic compo-

nent.

3. The warnings, cautions and product-speciﬁc notes must be observed.

4. In order to satisfy certain technical requirements, some of the products described in this

publication may contain substances subject to restrictions in certain jurisdictions (e.g.

because they are classed as “hazardous”). Useful information on this will be found in our

Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more

detailed questions, please contact our sales ofﬁces.

5. We constantly strive to improve our products. Consequently, the products described in this

publication may change from time to time. The same is true of the corresponding product

speciﬁcations. Please check therefore to what extent product descriptions and speciﬁcations

contained in this publication are still applicable before or when you place an order.

We also reserve the right to discontinue production and delivery of products. Conse-

quently, we cannot guarantee that all products named in this publication will always be avail-

able.

6. Unless otherwise agreed in individual contracts, all orders are subject to the current ver-

sion of the “General Terms of Delivery for Products and Services in the Electrical

Industry” published by the German Electrical and Electronics Industry Association

(ZVEI).

7. The trade names EPCOS, CeraDiode, CSSP, PhaseCap, PhaseMod, SIFI, SIKOREL, Silver-

Cap, SIMID, SIOV, SIP5D, SIP5K, TOPcap, UltraCap, WindCap are trademarks registered

or pending in Europe and in other countries. Further information will be found on the Internet

at www.epcos.com/trademarks.