NOMC107-256TS - VISHAY - Product.Network

NOMC

www.vishay.com Vishay Dale Thin Film

Revision: 25-Apr-17 1Document Number: 60007

For technical questions, contact: thinfilm@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Molded, 50 mil Pitch, Dual-In-Line Thin Film Resistor,

Narrow Body, Surface Mount Network

The NOMC series features a standard 14 pins and 16 pins

narrow body (0.150") small outline surface mount style. It

can accommodate resistor networks to your particular

application requirements. The networks can be constructed

with passivated nichrome (standard), or tantalum nitride (1)

resistor films to optimize performance.

Note

(1) Available upon request. Resistance value range and

performance differs from passivated nichrome standard

electrical specifications on datasheet, consult factory

FEATURES

• Standard 14 pins and 16 pins counts

(0.150" narrow body) JEDEC MS-012

variation AB and AC

• Rugged molded case construction

• Excellent long term ratio stability

(R ± 0.015 %)

• Low TCR tracking ± 5 ppm/°C

• Isolated and bussed schematics

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

Note

This datasheet provides information about parts that are



RoHS-compliant and / or parts that are non RoHS-compliant. For



example, parts with lead (Pb) terminations are not RoHS-compliant.



Please see the information / tables in this datasheet for details

TYPICAL PERFORMANCE

SCHEMATICS

The 01 circuit provides a choice of 13 or 15 equal value

resistors each connected between a common lead (14 or

16). Custom schematics available.

The 03 circuit provides a choice of 7 or 8 equal value

resistors (14 or 16). Custom schematics available.

Note

• Consult factory for additional values

Actual Size

ABSOLUTE TRACKING

TCR 25 5

ABSOLUTE RATIO

TOL. 0.10 0.05

Available

NOMC1401 or NOMCT1401

NOMC1601 or NOMCT1601

NOMC1403 or NOMCT1403

NOMC1603 or NOMCT1603

STANDARD RESISTANCE OFFERING (Equal Value Resistors)

ISOLATED (03) SCHEMATIC BUSSED (01) SCHEMATIC

1 k1 k

2 k5 k

5 k10 k

10 k20 k

20 k

25 k

50 k

100 k

NOMC

www.vishay.com Vishay Dale Thin Film

Revision: 25-Apr-17 2Document Number: 60007

For technical questions, contact: thinfilm@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Note

• Available upon request. Resistance value range and performance differs from passivated nichrome standard electrical specifications on

datasheet, consult factory

STANDARD ELECTRICAL SPECIFICATIONS

TEST SPECIFICATIONS CONDITIONS

Material Passivated nichrome (standard)

Tantalum nitride (available upon request) -

Pin/Lead Number 14, 16 -

Resistance Range 100  to 50 k each resistor (bussed (01) schematic) -

100  to 100 k each resistor (isolated (03) schematic)

TCR: Absolute ± 25 ppm/°C (standard) - 55 °C to + 125 °C

TCR: Tracking ± 5 ppm/°C (typical) - 55 °C to + 125 °C

Tolerance: Absolute ± 0.10 % to ± 1 % + 25 °C

Tolerance: Ratio ± 0.025 % to ± 0.1 % + 25 °C

Power Rating: Resistor 100 mW ((typical) (03) schematic) Maximum at + 70 °C

50 mW ((01) schematic)

Power Rating: Package 400 mW/500 mW Maximum at + 70 °C

Stability: Absolute R ± 0.05 % 2000 h at + 70 °C

Stability: Ratio R ± 0.015 % 2000 h at + 70 °C

Voltage Coefficient < 0.1 ppm/V -

Working Voltage 100 V max. not to exceed -

Operating Temperature Range - 55 °C to + 125 °C -

Storage Temperature Range - 55 °C to + 150 °C -

Noise  - 30 dB -

Thermal EMF 0.08 μV/°C -

Shelf Life Stability: Absolute R ± 0.01 % 1 year at + 25 °C

Shelf Life Stability: Ratio R ± 0.002 % 1 year at + 25 °C

P x R

DIMENSIONS AND IMPRINTING in inches and millimeters

DIMENSION 14 16

INCHES MILLIMETERS INCHES MILLIMETERS

H 0.235 5.969 0.235 5.969

E 0.154 3.911 0.154 3.91

O 0.340 8.363 0.390 9.906

A 0.063 1.60 0.063 1.60

e 0.050 1.270 0.050 1.270

B 0.015 0.381 0.015 0.381

C 0.008 0.203 0.008 0.203

L 0.025 0.635 0.025 0.635

A1 0.006 0.152 0.006 0.152

h 0.015 0.381 0.015 0.381

h x 45°

Index Area

PIN 1 Locator

MECHANICAL SPECIFICATIONS

Resistive Element Passivated nichrome

Substrate Material Silicon

Body Molded epoxy

Terminals Copper alloy

Lead (Pb)-free Option 100 % matte tin

Tin Lead Option Sn90

Tin Lead and Lead (Pb)-free Finish Plated

NOMC

www.vishay.com Vishay Dale Thin Film

Revision: 25-Apr-17 3Document Number: 60007

For technical questions, contact: thinfilm@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Notes

(1) Tolerance available 1K and up

(2) Preferred packaging code

ORDERING INFORMATION CHECK LIST (Customs)

Special requirements should be identified in advance, but as a minimum, you should have the following information ready.

ELECTRICAL MECHANICAL

1. Resistors, by value and tolerance

2. Reference resistor(s) and matching of which resistors to which

reference resistors

3. Reference by ratio

4. Absolute temperature coefficient of resistivity

5. Temperature tracking of subordinate resistors to reference

resistor(s)

6. Maximum operating voltage

7. Resistor power ratings

8. Operating temperature range

1. Maximum allowable seated height (from PC board to top of

network)

2. Special marking concerns

3. Schematic pin out of package

GLOBAL PART NUMBER INFORMATION

New Global Part Numbering: NOMC16031002BUF

GLOBAL MODEL

(4 or 5 digits) PINS SCHEMATIC RESISTANCE TOLERANCE AND

RATIO TOLERANCE PACKAGING

NOMC

(Tin Lead)

NOMCT

(Lead (Pb)-free)

(e3)

01 = 13 or 15

bussed

equal value

resistors

03 = 7 or 8

isolated

equal value

resistors

First 3 digits are

significant figures

and the last digit

specifies the number

of zeros to follow.

Example:

1002 = 10K

1003 = 100K

Abs. Tol.



A = 0.1 % (1)

B = 0.1 %

C = 0.25 %

D = 0.5 %

F = 1 %

Z = 0.1 % (1)

Ratio



0.05 %

0.1 %

0.5 %

0.025 %

TAPE AND REEL

T0 = 100 min., 100 mult

T1 = 1000 min., 1000 mult (2)

T3 = 300 min., 300 mult

T5 = 500 min., 500 mult

TF = Full reel 2500

TS = 100 min., 1 mult

UF = TUBED

Historical Part Number example: NOMC16031002Z (for reference purposes only)

NOMC 16 03 1002 Z

SERIES PINS SCHEMATIC RESISTANCE TOLERANCE AND

RATIO TOLERANCE

CT14 3100OM 3ZT10N

MC16 3100NO 2BUF0

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 01-Jan-2021 1Document Number: 91000

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.