EN4DSC36328GY - Hammond Manufacturing

PAGE 1 OF 1

HAMMOND

MANUFACTURING

ENCLOSURES

PAGE 1 OF 1

HAMMOND

MANUFACTURING

ENCLOSURES

BUL10324

EN4DSC SERIES

ASSEMBLY INSTRUCTIONS FOR

ECLIPSE DISCONNECT

REV. -

Interlock

Bracket

Step 1 - Drill holes in panel to accept the specific type of disconnect that is being used.

See the disconnect manufacturers instructions for drilling information.

Step 2 - Follow disconnect manufacturers instructions for installation of operating

handle.

Step 3 - Follow disconnect manufacturers instructions for installation of disconnect

device on panel.

Step 4 - Interlock bracket (provided) may need to be adjusted up or down to ensure that

operating handle can be moved to ON position when the door is closed. Verify

that the door can NOT be opened when operating handle is in the ON position.

In order to maintain the environmental rating of this enclosure, ensure that

any installed components (listed or recognized) have the same environmental

rating as the enclosure. Ensure all components are installed using the

manufacturers installation instructions.

DISCONNECT MOUNTING DETAILS

THIS SPACE IS

OCCUPIED BY

DISCONNECT

SWITCH AND

FUSE CLIP

(IF USED)

OR CIRCUIT

BREAKER

HAMMOND

MANUFACTURING

ENCLOSURES

BUL10324

EN4DSC SERIES

ASSEMBLY INSTRUCTIONS FOR

ECLIPSE DISCONNECT

REV. -

Interlock

Bracket

Step 1 - Drill holes in panel to accept the specific type of disconnect that is being used.

See the disconnect manufacturers instructions for drilling information.

Step 2 - Follow disconnect manufacturers instructions for installation of operating

handle.

Step 3 - Follow disconnect manufacturers instructions for installation of disconnect

device on panel.

Step 4 - Interlock bracket (provided) may need to be adjusted up or down to ensure that

operating handle can be moved to ON position when the door is closed. Verify

that the door can NOT be opened when operating handle is in the ON position.

In order to maintain the environmental rating of this enclosure, ensure that

any installed components (listed or recognized) have the same environmental

rating as the enclosure. Ensure all components are installed using the

manufacturers installation instructions.

DISCONNECT MOUNTING DETAILS

THIS SPACE IS

OCCUPIED BY

DISCONNECT

SWITCH AND

FUSE CLIP

(IF USED)

OR CIRCUIT

BREAKER

NOTE