RMTB1-03PCL102 - ITT Cannon

Microstrips .050" Contact Spacing MT

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

The Cannon Microstrips provide an extremely

dense and reliable interconnection solution in

aminimum profile package, giving great appli-

cation flexibility. Available with latches or

guide pins, Microstrips are frequently found in

board-to-wire applications where high reliabili-

ty is a primary concern.

Three termination styles are available: solder

cup, pigtail, harness, or printed circuit leads.

The MicroPin Contact System assures maxi-

mum performance in a minimum package.

Product Features

• High Performance MicroPin Contact System

•High-density .050” contact spacing

• Pre-wired for ease of installation

• Fully potted wireterminations

•Guide pins for alignment and polarizing

•Quick-disconnect latches

•3Amp current rating

• Precision crimp terminations

• Solder cup, pigtail or printed circuit terminations

• Surface mount leads

Specifications

Current Rating 3Amps max

Dielectric Withstanding Voltage 900 VAC @ sea level; 300 VAC @ 70,000 feet altitude

Insulation Resistance 5000 megohms min.

Contact Resistance 8milliohms max.

Operating Temperature MTV polyester -56°C to +125°C; MTB diallyl phthalate -55°C to +150°C

Durability 500 cycles min.

Shock/Vibration 50 G’s/20 G’s

Connector Mating Force (8 oz.) x (# of contacts)

Latch Retention 5lbs. min.

Wire Size #26 AWG insulated wire, #25 AWG uninsulated solid wire. MT strips will also accommodate #24 AWG through #32 AWG.

For other wiring options contact the factory for ordering information.

General Performance requirements in accordance with MIL-DTL-83513

Materials and Finishes

Insulator MTV:Glass-filled polyester per MIL-M-24519; MTB: Glass-filled diallyl phthalate per MIL-M-14

Contact Copper Alloy per MIL-C-83513

Contact Finish 50 Microinches Min. Gold Plated per MIL-G-45204

Insulated Wire#26 AWG. 19/38 Stranded, silver-plated copper,TFE Teflon insulation per MIL-W-16878/4

Uninsulated Solid Wire#25 AWG gold-plated copper per QQ-W-343

Potting Material/Contact Encapsulant Epoxy

Latch 300 series stainless steel, passivated

MicroPin Contact System

The Cannon MicroPin Contact System offers

uncompromised performance in downsized

interconnects. The beryllium copper pin contact is

fully recessed in the insulator, assuring positive

contact alignment and robust performance. The

socket contact is precision machined from high

strength copper alloy and features a smooth lead-in

chamfer.

The MicroPin features seven points of electrical

contact. This contact system assures high normal

force, excellent wipe and superior shock and

vibration performance.

SLEEVE WIRE

WIRE CRIMP

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

Microstrips .050" Contact Spacing MT

How to Order

R MTV1 – 16 P H001 01

RoHS Compliance

Series

MTB1 – High Temperature Diallyl Phthalate 150°C (Recommended for severe environments)

MTV1 – Polyester 125°C (Recommended for general purpose use)

Number of Cavities

2through 40.

This number is the total number of cavities including guide pins and latches. 40 positions is the

maximum recommended size for standard strips, but sizes up to 120 positions are available on request.

Contact Type

P- Pin

S–Socket

Termination Style

Solder Cup contacts for customer termination

Pre-wired Pigtails

H067 – Pre-wired pigtail with 18” of insulated Teflon wire per M22759/11, #26 AWG, 19 strand, yellow

HY01 – Pre-wired pigtail with 18” of insulated Teflon wire per M22759/11, #26 AWG, 19 strand, 10 color repeating

Straight Terminals .018” diameter,gold-plated

L1 – 5” extension

L2 – 1” extension

L57 – .190” extension

L61 – .125” extension

Right Angle Terminals staggered footprint .018” diameter,gold plated

AL57 – .190” extension

AL61 – .125” extension

Right Angle Terminals .050" in-line footprint .018" diameter,gold plated

BL57 – .190” extension

BL61 – .125” extension

Surface Mount .018” diameter, gold-plated

CL1

Guide Pin and Latch Options

01 – Guide pin installed in end cavities of socket strip. Blank holes in end cavities of pin strip.

02 – Guide pin installed in cavity #1 of socket Strip. Blank holes in cavity #1 of pin strip.

03 – Spring latches installed in end cavities of socket strip. Latch clips installed in end cavities of pin strip. For use with MTV1 only.

04 – Spring latch installed in center cavity of socket strip. Spring latch installed in center cavity of pin strip. For use with MTV1 only.

Socket StripPin Strip

Guide Pins In End Cavities

Guide Pins In Cavity #1

End Latches

Center Latch

CAV #1

SOCKET

CAV #1

Solder Cup Straight Terminals

Right Angle Terminals

.100" Spacing Staggered

ALL EVEN

NUMBERED

CONTACTS

.100 (2.54)

AL57 .190 (4.83)

AL61 .125 (3.18)

Surface Mount Terminals

.0120 (0.30)

±.001 (0.03)

.010 (0.25)

TYP

.070 (1.78)

.030 (0.76)

.050 (1.27) MIN

SOLDER DIPPED

.025 (0.64)

REF

.160

(4.06)

.140

(3.56)

Right Angle Terminals

.050" Centers

.170 (4.32) MAX.

.065 (1.65) MAX.

.065 (1.65) MAX. .100 (2.54)

.018 (1.65)

±.002 (0.5)

BL57: .190 (4.83)

BL61: .125 (3.18) MIN+ .015 (0.38)

L1: .500 (12.7)

L2: 1.00 (25.4)

L57: .190 (4.83)

L6: .125 (3.18) MIN+ .015 (0.38)

.018 (.45)

±.002 (.05)

Microstrips .050" Contact Spacing MT

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

Connector Weights

Contact (with std. 1/2”

copper pigtails) .040 gms.

MTB pin .021 gms.

Insulator socket .006 gms.

(per contact MTV pin .014 gms.

cavity) socket .004 gms.

Guide Stainless

Post Steel .035 gms.

Male .035 gms.

Latch Female .074 gms.

Terminal Dimensions

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

Male Latch

.032 ±.003

(0.81 ±0.08)

DIA.

.200 ±.010

(5.08 ±0.25)

.010 (6.25)

REF

Female Latch

.100 (2.54)

REF

.020 (0.51)

REF

.250 (6.35)

MAX

.035 (0.89)

REF

.045 (1.14)

MAX

.076 (1.93)

MAX

.070 (1.78)

REF

.050 (1.27)

REF

NO CONTACT

.035 (0.89)

REF

.035 (0.89)

REF

.070 (1.78)

REF

.050 (1.27)

REF

NO CONTACT

.035 (0.89)

REF

.0085 (0.22)

REF

.077 (1.96)

MAX

.107 (2.72) MAX

.2835 (7.20)

REF

Latch Dimensions

Microstrips .050" Contact Spacing MT

Standard Wire Termination Codes

Harness Type - (H)

Length

H020

H019

H026

H029

H028

H001

H033

H009

H010

H011

H013

H017

H042

3 (76.2)

6 (152.4)

8 (203.2)

10 (254.0)

12 (304.8)

18 (457.2)

20 (508.0)

24 (609.6)

30 (762.0)

36 (914.4)

48 (1219.2)

72 (1828.5)

120 (3048.0)

H027

H016

H034

H025

H002

H003

H023

H004

H005

H006

H048

H046

H041

L61

L56

L57

L39

L58

L14

L16

L10

.125 (3.18)

.150 (3.81)

.190 (4.83)

.250 (6.35)

.375 (9.52)

.500 (12.70)

.750 (19.05)

1.000 (25.40)

1.500 (38.10)

2.000 (50.80)

2.500 (63.50)

3.000 (76.20)

All Yellow ColorCodedTerminationCode Length

#26 AWG per MIL-W-16878 Type E; Teflon Stranded

Solid UninsulatedType - (L)

#25 AWG Gold Plated Copper

Thefollowingtermination codesare listed for your

information.For additional codespleaserefer to

Appendix on page79 and 81. All wire lengths are

minimum.

Guide Pin Dimensions

Polarization

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

Microminiature Strip - .100/.050" Contact Spacing MT

Modification code "-01" in the part number

refers to guide posts located on both ends

of the socket side of the 50-MIL STRIP

connector and empty cavities on the pin

side to accept the guide posts.

Although in many cases it is not necessary

to polarize 50-MIL STRIP connectors, there

are several ways to prevent cross plugging.

One method is the use of guide posts that

can be located in specified cavities to assure

that the contacts will align when these post

are positioned before mating.

MTB1 and MTV1 - .050 (1.27) Contact Centers

Receptacle Plug

.200 ± .010

(5.08 ± 0.25)

.032 ± .003

(0.81 ± 0.08)

DIA.

.126 ± .005

(3.20 ± 0.13)

.100 ± .005

(2.54 ± 0.13)

LEAD

LENGTH

.125 (3.18)

MAX. EPOXY

(INSULATED WIRE ONLY)

.050 (1.27) TYP.

CAVITY

.283 ± .005

(7.19 ± 0.13)

LEAD

LENGTH

.125 (3.18)

MAX. EPOXY

(INSULATED WIRE ONLY)

CAVITY

.070 ± .005 (1.78 ± 0.13): MTV

.080 ± .005 (2.03 ± 0.13): MTB

.070 ± .005 (1.78 ± 0.13): MTV

.080 ± .005 (2.03 ± 0.13): MTB

.050 (1.27) TYP.

NOTE: MTB1 available in up to 120 contacts.

Part

Number

by Size

MT*1-1**

MT*1-2**

MT*1-3**

MT*1-4**

MT*1-5**

MT*1-6**

MT*1-7**

MT*1-8**

MT*1-9**

MT*1-10**

MT*1-11**

MT*1-12**

MT*1-13**

MT*1-14**

MT*1-15**

MT*1-16**

MT*1-17**

MT*1-18**

MT*1-19**

MT*1-20**

.070 (1.78)

.120 (3.05)

.170 (4.32)

.220 (5.59)

.270 (6.85)

.320 (8.13)

.370 (9.40)

.420 (10.67)

.470 (11.94)

.520 (13.60)

.570 (14.48)

.620 (15.75)

.670 (17.02)

.720 (18.29)

.770 (19.56)

.820 (20.83)

.870 (22.10)

.920 (23.37)

.970 (24.64)

1.020 (25.91)

1.070 (27.18)

1.120 (28.45)

1.170 (29.72)

1.220 (30.99)

1.270 (32.36)

1.320 (33.53)

1.370 (34.80)

1.420 (36.07)

1.470 (37.34)

1.520 (38.61)

1.570 (39.88)

1.620 (41.15)

1.670 (42.42)

1.720 (43.69)

1.770 (44.96)

1.820 (46.23)

1.870 (47.50)

1.920 (48.77)

1.970 (50.04)

2.020 (51.31)

2.070 (52.58)

2.120 (53.85)

2.170 (55.12)

2.220 (56.39)

2.270 (57.66)

2.320 (58.93)

2.370 (60.20)

2.420 (61.47)

2.470 (62.74)

2.520 (64.01)

2.570 (65.28)

2.620 (66.55)

2.670 (67.82)

2.720 (69.09)

2.770 (70.36)

2.820 (71.63)

2.870 (72.90)

2.920 (74.17)

2.970 (75.44)

3.020 (76.71)

3.070 (77.98)

3.120 (79.25)

3.170 (80.52)

3.220 (81.79)

3.270 (83.06)

3.320 (84.33)

3.370 (85.60)

3.420 (86.87)

3.470 (88.14)

3.520 (89.41)

3.570 (90.68)

3.620 (91.95)

3.670 (93.22)

3.720 (94.49)

3.770 (95.76)

3.820 (97.03)

3.870 (98.30)

3.920 (99.57)

3.970 (100.84)

4.020 (102.11)

4.070 (103.38)

4.120 (104.65)

4.170 (105.92)

4.220 (107.19)

4.270 (108.46)

4.320 (109.73)

4.370 (111.00)

4.420 (112.27)

4.470 (113.54)

4.520 (114.81)

4.570 (116.08)

4.620 (117.35)

4.670 (118.62)

4.720 (119.89)

4.770 (121.16)

4.820 (122.43)

4.870 (123.70)

4.920 (124.97)

4.970 (126.24)

5.020 (127.50)

5.070 (128.78)

5.120 (130.05)

5.170 (131.32)

5.220 (132.59)

5.270 (133.86)

5.320 (135.13)

5.370 (136.40)

5.420 (137.67)

5.470 (138.94)

5.520 (140.21)

5.570 (141.48)

5.620 (142.75)

5.670 (144.02)

5.720 (145.29)

5.770 (146.56)

5.820 (147.83)

5.870 (149.10)

5.920 (150.37)

5.970 (151.64)

6.020 (152.91)

MT*1-21**

MT*1-22**

MT*1-23**

MT*1-24**

MT*1-25**

MT*1-26**

MT*1-27**

MT*1-28**

MT*1-29**

MT*1-30**

MT*1-31**

MT*1-32**

MT*1-33**

MT*1-34**

MT*1-35**

MT*1-36**

MT*1-37**

MT*1-38**

MT*1-39**

MT*1-40**

MT*1-41**

MT*1-42**

MT*1-43**

MT*1-44**

MT*1-45**

MT*1-46**

MT*1-47**

MT*1-48**

MT*1-49**

MT*1-50**

MT*1-51**

MT*1-52**

MT*1-53**

MT*1-54**

MT*1-55**

MT*1-56**

MT*1-57**

MT*1-58**

MT*1-59**

MT*1-60**

MT*1-61**

MT*1-62**

MT*1-63**

MT*1-64**

MT*1-65**

MT*1-66**

MT*1-67**

MT*1-68**

MT*1-69**

MT*1-70**

MT*1-71**

MT*1-72**

MT*1-73**

MT*1-74**

MT*1-75**

MT*1-76**

MT*1-77**

MT*1-78**

MT*1-79**

MT*1-80**

MT*1-81**

MT*1-82**

MT*1-83**

MT*1-84**

MT*1-85**

MT*1-86**

MT*1-87**

MT*1-88**

MT*1-89**

MT*1-90**

MT*1-91**

MT*1-92**

MT*1-93**

MT*1-94**

MT*1-95**

MT*1-96**

MT*1-97**

MT*1-98**

MT*1-99**

MT*1-100**

MT*1-101**

MT*1-102**

MT*1-103**

MT*1-104**

MT*1-105**

MT*1-106**

MT*1-107**

MT*1-108**

MT*1-109**

MT*1-110**

MT*1-111**

MT*1-112**

MT*1-113**

MT*1-114**

MT*1-115**

MT*1-116**

MT*1-117**

MT*1-118**

MT*1-119**

MT*1-120**

Part

Number

by Size

±.015 (0.38)

Part

Number

by Size

±.015 (0.38)

Part

Number

by Size

±.015 (0.38)

Part

Number

by Size

±.015 (0.38)

Part

Number

by Size

±.015 (0.38)

www.ittcannon.com

Dimensions shown in inch (mm)

Specifications and dimensions subject to change

Microminiature Strip - .100/.050" Contact Spacing MT

MTB2 and MTV2 - .100 (2.54) Contact Centers

Receptacle Plug

.200 ± .010

(5.08 ± 0.25)

.032 ± .003

(0.81 ± 0.08)

DIA.

.126 ± .005

(3.20 ± 0.13)

.100 ± .005

(2.54 ± 0.13)

LEAD

LENGTH

.125 (3.18)

MAX. EPOXY

(INSULATED WIRE ONLY)

.100 (2.54) TYP.

CAVITY

CAV #1

.283 ± .005

(7.19 ± 0.13)

LEAD

LENGTH

.125 (3.18)

MAX. EPOXY

(INSULATED WIRE ONLY)

CAVITY

.070 ± .005 (1.78 ± 0.13): MTV

.080 ± .005 (2.03 ± 0.13): MTB

.070 ± .005 (1.78 ± 0.13): MTV

.080 ± .005 (2.03 ± 0.13): MTB

.100 (2.54)

TYP.

Part

Number

by Size

MT*2-1**

MT*2-2**

MT*2-3**

MT*2-4**

MT*2-5**

MT*2-6**

MT*2-7**

MT*2-8**

MT*2-9**

MT*2-10**

MT*2-11**

MT*2-12**

MT*2-13**

MT*2-14**

MT*2-15**

MT*2-16**

MT*2-17**

MT*2-18**

MT*2-19**

MT*2-20**

MT*2*21**

MT*2-22**

MT*2-23**

MT*2-24**

MT*2-25**

MT*2-26**

MT*2-27**

MT*2-28**

MT*2-29**

MT*2-30**

MT*2-31**

MT*2-32**

MT*2-33**

MT*2-34**

MT*2-35**

MT*2-36**

MT*2-37**

MT*2-38**

MT*2-39**

MT*2-40**

MT*2-41**

MT*2-42**

MT*2-43**

MT*2-44**

MT*2-45**

MT*2-46**

MT*2-47**

MT*2-48**

MT*2-49**

MT*2-50**

MT*2*51**

MT*2-52**

MT*2-53**

MT*2-54**

MT*2-55**

MT*2-56**

MT*2-57**

MT*2-58**

MT*2-59**

MT*2-60**

.070 (1.78)

.170 (4.32)

.270 (6.86)

.370 (9.40)

.470 (11.94)

.570 (14.48)

.670 (17.02)

.770 (19.56)

.870 (22.10)

.970 (24.64)

1.070 (27.18)

1.170 (29.72)

1.270 (32.26)

1.370 (34.80)

1.470 (37.34)

1.570 (39.88)

1.670 (42.42)

1.770 (44.96)

1.870 (47.50)

1.970 (50.04)

2.070 (52.58)

2.170 (55.12)

2.270 (57.66)

2.370 (60.20)

2.470 (62.74)

2.570 (65.28)

2.670 (67.82)

2.770 (70.36)

2.870 (72.90)

2.970 (75.44)

±.015 (0.38)

Part

Number

by Size

±.015 (0.38)

3.070 (77.98)

3.170 (80.52)

3.270 (83.06)

3.370 (85.60)

3.470 (88.14)

3.570 (90.68)

3.670 (93.22)

3.770 (95.76)

3.870 (98.30)

3.970 (100.84)

4.070 (103.38)

4.170 (105.92)

4.270 (108.46)

4.370 (111.00)

4.470 (113.54)

4.570 (116.08)

4.670 (118.62)

4.770 (121.16)

4.870 (123.70)

4.970 (126.24)

5.070 (128.78)

5.170 (131.32)

5.270 (133.86)

5.370 (136.40)

5.470 (138.94)

5.570 (141.48)

5.670 (144.02)

5.770 (146.56)

5.870 (149.10)

5.970 (151.64)