Microstrips .050" Contact Spacing MT The Cannon Microstrips provide an extremely dense and reliable interconnection solution in a minimum profile package, giving great application flexibility. Available with latches or guide pins, Microstrips are frequently found in board-to-wire applications where high reliability is a primary concern. Three termination styles are available: solder cup, pigtail, harness, or printed circuit leads. The MicroPin Contact System assures maximum performance in a minimum package. Product Features * * * * * * * * * * High Performance MicroPin Contact System High-density .050" contact spacing Pre-wired for ease of installation Fully potted wire terminations Guide pins for alignment and polarizing Quick-disconnect latches 3 Amp current rating Precision crimp terminations Solder cup, pigtail or printed circuit terminations Surface mount leads MicroPin Contact System SLEEVE The Cannon MicroPin Contact System offers uncompromised performance in downsized interconnects. The beryllium copper pin contact is fully recessed in the insulator, assuring positive contact alignment and robust performance. The socket contact is precision machined from high strength copper alloy and features a smooth lead-in chamfer. WIRE WIRE CRIMP The MicroPin features seven points of electrical contact. This contact system assures high normal force, excellent wipe and superior shock and vibration performance. Specifications Current Rating Dielectric Withstanding Voltage Insulation Resistance Contact Resistance Operating Temperature Durability Shock/Vibration Connector Mating Force Latch Retention Wire Size 3 Amps max 900 VAC @ sea level; 300 VAC @ 70,000 feet altitude 5000 megohms min. 8 milliohms max. MTV polyester -56C to +125C; MTB diallyl phthalate -55C to +150C 500 cycles min. 50 G's/20 G's (8 oz.) x (# of contacts) 5 lbs. min. #26 AWG insulated wire, #25 AWG uninsulated solid wire. MT strips will also accommodate #24 AWG through #32 AWG. For other wiring options contact the factory for ordering information. General Performance requirements in accordance with MIL-DTL-83513 Materials and Finishes Insulator Contact Contact Finish Insulated Wire Uninsulated Solid Wire Potting Material/Contact Encapsulant Latch MTV: Glass-filled polyester per MIL-M-24519; MTB: Glass-filled diallyl phthalate per MIL-M-14 Copper Alloy per MIL-C-83513 50 Microinches Min. Gold Plated per MIL-G-45204 #26 AWG. 19/38 Stranded, silver-plated copper, TFE Teflon insulation per MIL-W-16878/4 #25 AWG gold-plated copper per QQ-W-343 Epoxy 300 series stainless steel, passivated Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 48 Microstrips .050" Contact Spacing MT How to Order R MTV1 - 16 P H001 01 RoHS Compliance Series MTB1 - High Temperature Diallyl Phthalate 150C (Recommended for severe environments) MTV1 - Polyester 125C (Recommended for general purpose use) Number of Cavities 2 through 40. This number is the total number of cavities including guide pins and latches. 40 positions is the maximum recommended size for standard strips, but sizes up to 120 positions are available on request. Contact Type P- Pin S - Socket Pin Strip Socket Strip Termination Style Solder Cup contacts for customer termination S Pre-wired Pigtails H067 - Pre-wired pigtail with 18" of insulated Teflon wire per M22759/11, #26 AWG, 19 strand, yellow HY01 - Pre-wired pigtail with 18" of insulated Teflon wire per M22759/11, #26 AWG, 19 strand, 10 color repeating Straight Terminals .018" diameter, gold-plated L1 - 5" extension L2 - 1" extension L57 - .190" extension L61 - .125" extension Right Angle Terminals staggered footprint .018" diameter, gold plated AL57 - .190" extension AL61 - .125" extension Right Angle Terminals .050" in-line footprint .018" diameter, gold plated BL57 - .190" extension BL61 - .125" extension Surface Mount .018" diameter, gold-plated CL1 Guide Pin and Latch Options 01 - Guide pin installed in end cavities of socket strip. Blank holes in end cavities of pin strip. 02 - Guide pin installed in cavity #1 of socket Strip. Blank holes in cavity #1 of pin strip. 03 - Spring latches installed in end cavities of socket strip. Latch clips installed in end cavities of pin strip. For use with MTV1 only. 04 - Spring latch installed in center cavity of socket strip. Spring latch installed in center cavity of pin strip. For use with MTV1 only. 01 Guide Pins In End Cavities 02 Guide Pins In Cavity #1 03 End Latches Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 49 04 Center Latch Microstrips .050" Contact Spacing MT Connector Weights Contact (with std. 1/2" copper pigtails) .040 gms. MTB pin .021 gms. Insulator (per contact cavity) MTV socket pin socket .006 gms. .014 gms. .004 gms. Guide Post Stainless Steel .035 gms. Latch Male Female .035 gms. .074 gms. Terminal Dimensions .170 (4.32) MAX. .065 (1.65) MAX. .100 (2.54) .018 (.45) .002 (.05) L1: .500 (12.7) L2: 1.00 (25.4) L57: .190 (4.83) L6: .125 (3.18) MIN+ .015 (0.38) .065 (1.65) MAX. .018 (1.65) .002 (0.5) BL57: .190 (4.83) BL61: .125 (3.18) MIN+ .015 (0.38) Solder Cup Straight Terminals Right Angle Terminals .050" Centers .0120 (0.30) .001 (0.03) CAV #1 PIN ALL EVEN NUMBERED CONTACTS CAV #1 SOCKET .070 (1.78) .030 (0.76) AL57 .190 (4.83) AL61 .125 (3.18) .160 (4.06) .140 (3.56) .100 (2.54) .010 (0.25) TYP .100 (2.54) .025 (0.64) REF Right Angle Terminals .100" Spacing Staggered .050 (1.27) MIN SOLDER DIPPED Surface Mount Terminals Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 50 Microstrips .050" Contact Spacing MT Latch Dimensions .0085 (0.22) REF .076 (1.93) MAX .077 (1.96) MAX .035 (0.89) REF .035 (0.89) REF .010 (6.25) REF .107 (2.72) MAX .050 (1.27) REF .050 (1.27) REF NO CONTACT .2835 (7.20) REF .250 (6.35) MAX .020 (0.51) REF NO CONTACT .070 (1.78) REF .035 (0.89) REF .070 (1.78) REF .045 (1.14) MAX .035 (0.89) REF .100 (2.54) REF Male Latch Female Latch Guide Pin Dimensions .032 .003 (0.81 0.08) DIA. .200 .010 (5.08 0.25) Standard Wire Termination Codes The following termination codes are listed for your information. For additional codes please refer to Appendix on page 79 and 81. All wire lengths are minimum. Harness Type - (H) Solid Uninsulated Type - (L) #26 AWG per MIL-W-16878 Type E; Teflon Stranded Length 3 (76.2) 6 (152.4) 8 (203.2) 10 (254.0) 12 (304.8) 18 (457.2) 20 (508.0) 24 (609.6) 30 (762.0) 36 (914.4) 48 (1219.2) 72 (1828.5) 120 (3048.0) All Yellow H020 H019 H026 H029 H028 H001 H033 H009 H010 H011 H013 H017 H042 Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 51 Color Coded H027 H016 H034 H025 H002 H003 H023 H004 H005 H006 H048 H046 H041 #25 AWG Gold Plated Copper Termination Code L61 L56 L57 L39 L58 L1 L14 L2 L7 L6 L16 L10 Length .125 (3.18) .150 (3.81) .190 (4.83) .250 (6.35) .375 (9.52) .500 (12.70) .750 (19.05) 1.000 (25.40) 1.500 (38.10) 2.000 (50.80) 2.500 (63.50) 3.000 (76.20) Microminiature Strip - .100/.050" Contact Spacing MT Polarization Modification code "-01" in the part number refers to guide posts located on both ends of the socket side of the 50-MIL STRIP connector and empty cavities on the pin side to accept the guide posts. Although in many cases it is not necessary to polarize 50-MIL STRIP connectors, there are several ways to prevent cross plugging. One method is the use of guide posts that can be located in specified cavities to assure that the contacts will align when these post are positioned before mating. MTB1 and MTV1 - .050 (1.27) Contact Centers .032 .003 (0.81 0.08) DIA. .200 .010 (5.08 0.25) .050 (1.27) TYP. .126 .005 (3.20 0.13) CAVITY #1 CAVITY #1 .050 (1.27) TYP. .283 .005 (7.19 0.13) A CAVITY #1 A CAVITY #1 .100 .005 (2.54 0.13) LEAD LENGTH .070 .005 (1.78 0.13): MTV .080 .005 (2.03 0.13): MTB .070 .005 (1.78 0.13): MTV LEAD LENGTH .080 .005 (2.03 0.13): MTB .125 (3.18) MAX. EPOXY (INSULATED WIRE ONLY) .125 (3.18) MAX. EPOXY (INSULATED WIRE ONLY) Receptacle Plug A .015 (0.38) Part Number by Size A .015 (0.38) Part Number by Size A .015 (0.38) Part Number by Size A .015 (0.38) MT*1-1** .070 (1.78) MT*1-21** 1.070 (27.18) MT*1-41** 2.070 (52.58) MT*1-61** 3.070 (77.98) MT*1-81** MT*1-2** .120 (3.05) MT*1-22** 1.120 (28.45) MT*1-42** 2.120 (53.85) MT*1-62** 3.120 (79.25) MT*1-82** 4.070 (103.38) MT*1-101** 5.070 (128.78) 4.120 (104.65) MT*1-102** MT*1-3** .170 (4.32) MT*1-23** 1.170 (29.72) MT*1-43** 2.170 (55.12) MT*1-63** 3.170 (80.52) 5.120 (130.05) MT*1-83** 4.170 (105.92) MT*1-103** MT*1-4** .220 (5.59) MT*1-24** 1.220 (30.99) MT*1-44** 2.220 (56.39) MT*1-64** 5.170 (131.32) 3.220 (81.79) MT*1-84** 4.220 (107.19) MT*1-104** MT*1-5** .270 (6.85) MT*1-25** 1.270 (32.36) MT*1-45** 2.270 (57.66) 5.220 (132.59) MT*1-65** 3.270 (83.06) MT*1-85** 4.270 (108.46) MT*1-105** MT*1-6** .320 (8.13) MT*1-26** 1.320 (33.53) MT*1-46** 5.270 (133.86) 2.320 (58.93) MT*1-66** 3.320 (84.33) MT*1-86** 4.320 (109.73) MT*1-106** MT*1-7** .370 (9.40) MT*1-27** 1.370 (34.80) 5.320 (135.13) MT*1-47** 2.370 (60.20) MT*1-67** 3.370 (85.60) MT*1-87** 4.370 (111.00) MT*1-107** MT*1-8** .420 (10.67) MT*1-28** 5.370 (136.40) 1.420 (36.07) MT*1-48** 2.420 (61.47) MT*1-68** 3.420 (86.87) MT*1-88** 4.420 (112.27) MT*1-108** MT*1-9** .470 (11.94) 5.420 (137.67) MT*1-29** 1.470 (37.34) MT*1-49** 2.470 (62.74) MT*1-69** 3.470 (88.14) MT*1-89** 4.470 (113.54) MT*1-109** MT*1-10** 5.470 (138.94) .520 (13.60) MT*1-30** 1.520 (38.61) MT*1-50** 2.520 (64.01) MT*1-70** 3.520 (89.41) MT*1-90** 4.520 (114.81) MT*1-110** 5.520 (140.21) MT*1-11** .570 (14.48) MT*1-31** 1.570 (39.88) MT*1-51** 2.570 (65.28) MT*1-71** 3.570 (90.68) MT*1-91** 4.570 (116.08) MT*1-111** 5.570 (141.48) MT*1-12** .620 (15.75) MT*1-32** 1.620 (41.15) MT*1-52** 2.620 (66.55) MT*1-72** 3.620 (91.95) MT*1-92** 4.620 (117.35) MT*1-112** 5.620 (142.75) MT*1-13** .670 (17.02) MT*1-33** 1.670 (42.42) MT*1-53** 2.670 (67.82) MT*1-73** 3.670 (93.22) MT*1-93** 4.670 (118.62) MT*1-113** 5.670 (144.02) MT*1-14** .720 (18.29) MT*1-34** 1.720 (43.69) MT*1-54** 2.720 (69.09) MT*1-74** 3.720 (94.49) MT*1-94** 4.720 (119.89) MT*1-114** 5.720 (145.29) MT*1-15** .770 (19.56) MT*1-35** 1.770 (44.96) MT*1-55** 2.770 (70.36) MT*1-75** 3.770 (95.76) MT*1-95** 4.770 (121.16) MT*1-115** 5.770 (146.56) MT*1-16** .820 (20.83) MT*1-36** 1.820 (46.23) MT*1-56** 2.820 (71.63) MT*1-76** 3.820 (97.03) MT*1-96** 4.820 (122.43) MT*1-116** 5.820 (147.83) MT*1-17** .870 (22.10) MT*1-37** 1.870 (47.50) MT*1-57** 2.870 (72.90) MT*1-77** 3.870 (98.30) MT*1-97** 4.870 (123.70) MT*1-117** 5.870 (149.10) MT*1-18** .920 (23.37) MT*1-38** 1.920 (48.77) MT*1-58** 2.920 (74.17) MT*1-78** 3.920 (99.57) MT*1-98** 4.920 (124.97) MT*1-118** 5.920 (150.37) MT*1-19** .970 (24.64) MT*1-39** 1.970 (50.04) MT*1-59** 2.970 (75.44) MT*1-79** 3.970 (100.84) MT*1-99** 4.970 (126.24) MT*1-119** 5.970 (151.64) MT*1-20** 1.020 (25.91) MT*1-40** 2.020 (51.31) MT*1-60** 3.020 (76.71) MT*1-80** 4.020 (102.11) MT*1-100** 5.020 (127.50) MT*1-120** 6.020 (152.91) Part Number by Size Part Number by Size A .015 (0.38) Part Number by Size A .015 (0.38) NOTE: MTB1 available in up to 120 contacts. Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 52 Microminiature Strip - .100/.050" Contact Spacing MT MTB2 and MTV2 - .100 (2.54) Contact Centers .032 .003 (0.81 0.08) DIA. .200 .010 (5.08 0.25) CAV #1 A A CAVITY #1 .100 (2.54) TYP. .070 .005 (1.78 0.13): MTV .070 .005 (1.78 0.13): MTV .080 .005 (2.03 0.13): MTB .080 .005 (2.03 0.13): MTB .126 .005 (3.20 0.13) .100 (2.54) TYP. CAVITY #1 CAVITY #1 .283 .005 (7.19 0.13) .100 .005 (2.54 0.13) LEAD LENGTH LEAD LENGTH .125 (3.18) MAX. EPOXY (INSULATED WIRE ONLY) .125 (3.18) MAX. EPOXY (INSULATED WIRE ONLY) Plug Receptacle Part Number by Size A .015 (0.38) MT*2-1** .070 (1.78) MT*2-31** A .015 (0.38) 3.070 (77.98) MT*2-2** .170 (4.32) MT*2-32** 3.170 (80.52) MT*2-3** .270 (6.86) MT*2-33** 3.270 (83.06) MT*2-4** .370 (9.40) MT*2-34** 3.370 (85.60) MT*2-5** .470 (11.94) MT*2-35** 3.470 (88.14) MT*2-6** .570 (14.48) MT*2-36** 3.570 (90.68) MT*2-7** .670 (17.02) MT*2-37** 3.670 (93.22) MT*2-8** .770 (19.56) MT*2-38** 3.770 (95.76) MT*2-9** .870 (22.10) MT*2-39** 3.870 (98.30) MT*2-10** .970 (24.64) MT*2-40** 3.970 (100.84) MT*2-11** 1.070 (27.18) MT*2-41** 4.070 (103.38) MT*2-12** 1.170 (29.72) MT*2-42** 4.170 (105.92) MT*2-13** 1.270 (32.26) MT*2-43** 4.270 (108.46) MT*2-14** 1.370 (34.80) MT*2-44** 4.370 (111.00) MT*2-15** 1.470 (37.34) MT*2-45** 4.470 (113.54) MT*2-16** 1.570 (39.88) MT*2-46** 4.570 (116.08) MT*2-17** 1.670 (42.42) MT*2-47** 4.670 (118.62) MT*2-18** 1.770 (44.96) MT*2-48** 4.770 (121.16) MT*2-19** 1.870 (47.50) MT*2-49** 4.870 (123.70) MT*2-20** 1.970 (50.04) MT*2-50** 4.970 (126.24) MT*2*21** 2.070 (52.58) MT*2*51** 5.070 (128.78) MT*2-22** 2.170 (55.12) MT*2-52** 5.170 (131.32) MT*2-23** 2.270 (57.66) MT*2-53** 5.270 (133.86) MT*2-24** 2.370 (60.20) MT*2-54** 5.370 (136.40) MT*2-25** 2.470 (62.74) MT*2-55** 5.470 (138.94) MT*2-26** 2.570 (65.28) MT*2-56** 5.570 (141.48) MT*2-27** 2.670 (67.82) MT*2-57** 5.670 (144.02) MT*2-28** 2.770 (70.36) MT*2-58** 5.770 (146.56) MT*2-29** 2.870 (72.90) MT*2-59** 5.870 (149.10) MT*2-30** 2.970 (75.44) MT*2-60** 5.970 (151.64) Dimensions shown in inch (mm) Specifications and dimensions subject to change www.ittcannon.com 53 Part Number by Size