66183 PROTON RADIATION TOLERANT 6 PIN LCC OPTOCOUPLER OPTOELECTRONIC PRODUCTS DIVISION 03/11/2009 Features: Applications: * * * * * * * * * * * High Reliability Base lead provided for conventional transistor biasing Rugged package Stability over wide temperature +1000V electrical isolation JANS Level screening available Eliminate ground loops Level shifting Line receiver Switching power supplies Motor control DESCRIPTION The 66183 is a single channel device electrically similar to the 4N49. This product has been designed to be more tolerant to proton radiation. The 66183 optocoupler is packaged in a hermetically sealed 6 pin leadless chip carrier (LCC). This device can be supplied to customer specifications as well as tested in accordance with MIL-PRF-19500 to Class S level. ABSOLUTE MAXIMUM RATINGS Input to Output Isolation Voltage ........................................................................................................................................... 1 kV Input Diode Continuous Forward Current ......................................................................................................................... 40 mA Peak Forward Input Current (value applies for tw 10s, PRR < 300 pps) ........................................................................... 1 A Reverse Input Voltage ............................................................................................................................................................ 2 V Input Power Dissipation (Note 1) ............................................................................................................ 80 mW Emitter-Base Voltage ............................................................................................................................................................... 7 V Collector-Emitter Voltage (Value applies to emitter-base open-circuited and the input diode equal to zero).................... 60 V Collector-Base Voltage .......................................................................................................................................................... 60 V Continuous Collector Current ............................................................................................................................................. 50 mA Continuous Transistor Power Dissipation (Note 2) .....................................................................................300 mW Storage Temperature ......................................................................................................................................... -65C to +150C Operating Free-Air Temperature Range ............................................................................................................-55C to +125C Lead Solder Temperature (10 seconds max.)................................................................................................................... 240C Notes: 1. Derate linearly at the rate of 1.33 mW/C above 65C case. 2. Derate linearly at the rate of 3 mW/C above 25C case. Package Dimensions 0.250 [6.35] 0.240 [6.10] Schematic Diagram 0.080 [2.03] 0.066 [1.68] 0.175 [4.45] 0.165 [4.19] A 1 3 C PIN 1 IDENTIFIER 0.028 [0.71] 0.022 [0.56] 2 3 0.105 [2.67] 0.095 [2.41] 5 E 4 1 K 6 5 6 0.098 [2.49] 0.082 [2.08] 5 PLS 0.070 [1.78] 0.060 [1.52] 4 B 0.055 [1.40] 0.045 [1.14] ALL DIMENSIONS ARE IN INCHES [MILLIMETERS] MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION * 725 E.Walnut St., Garland, TX 75040 * (972)272-3571 * Fax (972)487-6918 www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM 66183 PROTON RADIATION TOLERANT 6 PIN LCC OPTOCOUPLER 03/11/2009 ELECTRICAL CHARACTERISTICS TA = 25C unless otherwise specified. PARAMETER SYMBOL Input Diode Static Reverse Current MIN TYP IR Input Diode Static Forward Voltage -55C VF 1.0 Input Diode Static Forward Voltage +25C VF 0.8 Input Diode Static Forward Voltage +100C VF 0.8 1.8 MAX UNITS TEST CONDITIONS 10 A VR = 2 V 2.2 V IF = 10 mA 2.0 V IF = 10 mA 2.2 V IF = 10 mA MAX UNITS TEST CONDITIONS V IC = 100 A, IB = 0, IF = 0 NOTE OUTPUT TRANSISTOR TA = 25C unless otherwise specified. SYMBOL MIN Collector-Base Breakdown Voltage PARAMETER V(BR)CBO 45 Collector-Emitter Breakdown Voltage V(BR)CEO 40 V IC = 1 mA, IB = 0, IF = 0 Emitter-Base Breakdown Voltage V(BR)EBO 7 V IC = 0 mA, IE = 100 A, IF = 0 Off-State Collector Current TYP ICEO +100C 100 nA 100 A MAX NOTE VCE = 20 V, IF = 0 mA, IB = 0 COUPLED CHARACTERISTICS TA = 25C unless otherwise specified. PARAMETER SYMBOL MIN UNITS TEST CONDITIONS IC(ON) 2.0 mA VCE = 5 V, IF = 1 mA, IB=0 On State Collector Current TYP NOTE On State Collector Current +100C IC(ON) 2.0 mA VCE = 5.0 V, IF = 2 mA, IB=0 On State Collector Current -55C IC(ON) 2.8 mA VCE = 5 V, IF = 2 mA, IB=0 V IF = 2 mA, IC= 2 mA V II-O = 100 nA 1 pF f = 1MHz, VI-O = 1000 V 1 Collector-Emitter Saturation Voltage VCE(SAT) Input to Output Isolation Voltage VI-O Input to Output Capacitance CIO 0.3 1000 2.5 5 Rise Time-Phototransistor Operation tr 10 25 s Fall Time-Phototransistor Operation tf 10 25 s VCC = 10 V, IF = 10 mA, RL = 100 , IB = 0 VCC = 10V, IF = 10mA, RL = 100 , IB = 0 2 2 NOTES: 1. These parameters are measured between all phototransistor leads shorted together and with both input diode leads shorted together. 2. This parameter must be measured using pulse techniques (tW = 100 s duty cycle < 1%). RECOMMENDED OPERATING CONDITIONS: PARAMETER SYMBOL MIN MAX Input Current, Low Level IFL 0 90 A Input Current, High Level IFH 2 10 mA Supply Voltage VCE 5 10 TA -55 100 Operating Temperature UNITS V C SELECTION GUIDE PART NUMBER PART DESCRIPTION 66183-001 Commercial 66183-101 Screened to JAN level 66183-103 Screened to JANTX level 66183-105 Screened to JANTXV level 66183-300 Screened to JANS level MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION * 725 E.Walnut St., Garland, TX 75040 * (972)272-3571 * Fax (972)487-6918 www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM