
Kvaser USBcan Light 2xHS
2.0 compliant interface. With the three connectors at the end of fully galvanically
isolated flexible wires, this device is designed to facilitate any application in
which the CAN bus connectors aren't easily accessible, such as hard to reach
electronic control units (ECU) on a vehicle.
USBcan Light 2xHS is supplied with CANlib, the software API that is common to
all Kvaser hardware. Taking just 30 seconds to programme once you have Canlib
downloaded on the host computer, USBcan Light 2xHS is simple to install and
configure.
Major features of the USBcan Light 2xHS
One USB 2.0 compliant device provides easy access to two CAN busses.
Quick and easy plug-and-play installation.
Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers.
100% compatible with applications written for other Kvaser CAN
hardware with Kvaser CANlib.
High-speed CAN connection (compliant with ISO 11898-2), up to 1 Mbit/s.
Fully compatible with J1939, CANopen, NMEA 2000R and DeviceNet.
TECHNICAL DATA - KVASER USBCAN LIGHT 2XHS
GALVANIC ISOLATION Yes
BITRATE 40-1000 kbit/s
SILENT MODE No
ERROR FRAME GENERATION No
ERROR FRAME DETECTION Yes
WEIGHT 150g
TIMESTAMP RESOLUTION 2µs
ON BOARD BUFFER Yes
MAXIMUM MESSAGE RATE, SEND 8000
MAXIMUM MESSAGE RATE, RECEIVE 8000
SOUND No
CLOCK SYNCHRONIZATION N/A
DIMENSIONS (WXLXH) 50x90x25mm
Kvaser USBcan Light 2xHS