To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
Is Now Part of
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
©2010 Fairchild Semiconductor Corporation 1www.fairchildsemi.com
FPAB30BH60B Rev. C4
FPAB30BH60B PFC SPM® 3 Series for Single-Phase Boost PFC
December 2013
FPAB30BH60B
PFC SPM® 3 Series for Single-Phase Boost PFC
Features
• UL Certified No. E209204 (UL1557)
• 600 V - 30 A Single-Phase Boost PFC with Integral
Gate Driver and Protection
• Very Low Thermal Resistance Using Al2O3 DBC
Substrate
• Full-Wave Bridge Rectifier and High-Performance
Output Diode
• Built-in NTC Thermistor for Tempe r ature Monitoring
• Optimized for 20kHz Switchi ng Frequency
• Isolation Rating: 25 00 Vrms/min.
Applications
• Single-Phase Boost PF C Converter
Related Source
•AN-9090 - PFC SPM 3 Series User’s Guide
•AN-9091 - Boost PFC Inductor Design Guide
General Description
The FPAB30BH60B is an advanced PFC SPM® 3
module providing a fully-featured, high-performance
Boost PFC (Power Factor Correcti on) input power stage
for consumer, medical, and industrial applications.
These single-phase modules integrate optimized gate
drive of the built-in IGBT to minimize EMI and losses,
while also providing multiple on-module protection
features including under-voltage lockout, over-current
shutdown, thermal monitoring, and fault reporting. These
modules also feature a full-wave rectifier, and high-
performance output diode for additional space savings
and mounting convenience.
Figure 1. Package Overview
Package Marking & Ordering Information
Device Device Marking Package Packing Type Quantity
FPAB30BH60B FPAB30BH60B SPMIC-027 Rail 10
©2010 Fairchild Semiconductor Corporation 2www.fairchildsemi.com
FPAB30BH60B Rev. C4
FPAB30BH60B PFC SPM® 3 Series for Single-Phase Boost PFC
Integrated Power Functions
• PFC converter for single-phase AC / DC power conversion (please refer to Figure 3)
Integrated Drive, Protection, and System Control Functions
• For IGBTs: gate drive circuit, Over-Current Protection (OCP), control supply circuit Under-Voltage Lock-Out (UVLO) Protection
• Fault signal: corresponding to OC and UV fault
• Built-in thermistor: temperature monitoring
• Input interface: active-HIGH interface, works with 3.3 / 5 V logic, Schmitt-trigger input
Pin Configuration
Figure 2. Top View
Notes :
1. For the m easurement point of case temperature(TC), please refer to Figure 2.
12.205
18.345
(1)VCC
(2)COM
(3)COM
(4)COM
(5)IN
(6)VFO
(7)CFOD
(8)CSC
(9)RTH
(10)VTH
(11)N.C
(12)N.C
(13)N
(14)N
(15)N
(16)N
(17)NR
(18)NR
(19)NR
(20)NR
(21)P
(22)P
(23)N.C
(24)L
(25)PR
(26)R
(27)S
DBC Substrate
Case Temperature (TC)
Detecting Point
Top View
12.205
18.345
(1)VCC
(2)COM
(3)COM
(4)COM
(5)IN
(6)VFO
(7)CFOD
(8)CSC
(9)RTH
(10)VTH
(11)N.C
(12)N.C
(13)N
(14)N
(15)N
(16)N
(17)NR
(18)NR
(19)NR
(20)NR
(21)P
(22)P
(23)N.C
(24)L
(25)PR
(26)R
(27)S
DBC Substrate
Case Temperature (TC)
Detecting Point
Top View
©2010 Fairchild Semiconductor Corporation 3www.fairchildsemi.com
FPAB30BH60B Rev. C4
FPAB30BH60B PFC SPM® 3 Series for Single-Phase Boost PFC
Pin Descriptions
* 11th and 12th pins are cut. Please refer to package outline drawings for more detail.
Internal Equivalent Circuit and Input/Output Pins
Figure 3. Internal Block Diagram
Pin Number Pin Name Pin Description
1V
CC Common Bias Voltage for IC and IGBT Driving
2,3,4 COM Common Supply Ground
5 IN Signal Input for IGBT
6V
FO Fault Output
7C
FOD Capacitor for Fault Output Duration Selection
8C
SC Capacitor (Low-Pass Filter) for Over-Current Detection
9R
(TH) Series Resistor for The Use of Thermistor
10 V(TH) Thermistor Bias Voltage
11,12 N.C No Connection*
13~16 N IGBT Emitter
17~20 NRNegative DC-Link of Rectifier
21,22 P Positive Rail of DC-Link
23 N.C No Connection
24 L Reactor Connection Pin
25 PRPositive DC-Link of Rectifier
26 R AC Input for R-Phase
27 S AC Input for S-Phase
CSC
CFOD
VFO
IN
COM
VCC
OUT
(21,22) P
(24) L
(25 ) PR
NTC
Thermistor
(2 6) R
(27 ) S
(5 ) IN
(2~ 4 ) C OM
(1 ) VC C
(6 ) VFO
(7 ) CFOD
(8 ) CS C
(10) VTH
(9 ) RTH
(13~16) N
(17 ~ 2 0) NR
©2010 Fairchild Semiconductor Corporation 4www.fairchildsemi.com
FPAB30BH60B Rev. C4
FPAB30BH60B PFC SPM® 3 Series for Single-Phase Boost PFC
Absolute Maximum Ratings (TJ = 25°C, unless otherwise specified.)
Converter Part
Control Part
Total System
Thermal Resistance
Symbol Item Condition Rating Unit
ViSupply Voltage Applied between R - S 264 Vrms
Vi(Surge) Supply Voltage (Surge) Applied between R - S 500 V
VPN Output Voltage Applied between P - N 450 V
VPN(Surge) Output Voltage (Surge) Applied between P - N 500 V
VCES Collector - Emitter Voltage 600 V
ICEach IGBT Collector Current TC = 25°C, TJ < 150°C 30 A
ICP Each IGBT Collector Current (Peak) TC = 25°C, TJ < 150°C, Under 1ms Pulse Width 60 A
PCCollector Dissipation TC = 25°C 104 W
VRRM Repititive Peak Reverse Voltage 600 V
IFSM Peak Forward Surge Current Single Half Sine-Wave 350 A
TJOperating Junction Temperature -40 ~ 150 °C
Symbol Item Condition Rating Unit
VCC Control Supply Voltage Applied between VCC - COM 20 V
VIN Input Signal Voltage Applied between IN - COM -0.3 ~ VCC+0.3 V
VFO Fault Output Supply Voltage Applied between VFO - COM -0.3 ~ VCC+0.3 V
IFO Fault Output Current Sink Current at VFO Pin 5 mA
VSC Current Sensing Input Voltage Applied between CSC - COM -0.3 ~ VCC+0.3 V
Symbol Item Condition Rating Unit
TSTG Storage Temperature -40 ~ 125 °C
VISO Isolation Voltage 60 Hz, Sinusoidal, AC 1 Minute, Connect Pins
to Heat Sink Plate 2500 Vrms
Symbol Item Condition Min. Typ. Max. Unit
R(j-c)Q Junction to Case Thermal Resistance IGBT - - 1.2 °C/W
R(j-c)F FRD - - 1.4 °C/W
R(j-c)R Rectifier (per 1 / 4 module) - - 1.7 °C/W
©2010 Fairchild Semiconductor Corporation 5www.fairchildsemi.com
FPAB30BH60B Rev. C4
FPAB30BH60B PFC SPM® 3 Series for Single-Phase Boost PFC
Electrical Characteristics (TJ = 25°C, unless otherwise specified.)
Converter Part
Notes:
2. tON and tOFF include the propagation delay of the internal drive IC . tC(ON) and tC(OFF) are the switching time of IGBT itself under the given gate driving condition internally. For
the detailed information, please see Figure 4.
Figure 4. Switching Time Definition
Symbol Item Condition Min. Typ. Max. Unit
VCE(SAT) IGBT Saturation Voltage VCC = 15 V, VIN = 5 V, IC = 30 A - 2.2 2.8 V
VFF FRD Forward Voltage IF = 30 A - 1.9 2.6 V
VFR Rectifier Forward Voltage IF = 30 A - 1.2 1.5 V
tON Switching Times VPN = 400 V, VCC = 15V, IC = 30 A
VIN = 0 V 5 V, Inductive Load
(Note 2)
- 500 - ns
tC(ON) - 200 - ns
tOFF - 420 - ns
tC(OFF) - 100 - ns
trr -60-ns
Irr -7-A
ICES Collector - Emitter
Leakage Current VCE = VCES - - 250 A
tON tC(ON)
trr
Irr
10% of IC
100% of IC
90% of IC
120% of IC
15% of V CE
(a ) T u rn -o n
tOFF
tC(OFF)
(b ) T u rn -o ff
IC
VCE
VCE
IC
VIN VIN
15% of VCE
10% of IC
©2010 Fairchild Semiconductor Corporation 6www.fairchildsemi.com
FPAB30BH60B Rev. C4
FPAB30BH60B PFC SPM® 3 Series for Single-Phase Boost PFC
Control Part
Notes:
3. The fault-out pulse width tFOD depends on the capacitance value of CFOD according to the following appr oximate equation: CFOD = 18.3 x 10-6 x tFOD [F].
4. TTH is the temperature of know case temperature(TC), please make the experiment considering your application.
Figure 5. R-T Curve of the Built-In Thermistor
Symbol Item Condition Min. Typ. Max. Unit
IQCCL Quiescent VCC Supply Current VCC = 15 V, IN = 0 V VCC - COM - - 26 mA
VFOH Fault Output Voltage VSC = 0 V, VFO Circuit: 4.7 k to 5 V Pull-up 4.5 - - V
VFOL VSC = 1 V, VFO Circuit: 4.7 k to 5 V Pull-up - - 0.8 V
VSC(ref) Over-Current Trip Level VCC = 15 V 0.45 0.50 0.55 V
UVCCD Supply Circuit Under-Voltage
Protection Detection Level 10.7 11.9 13.0 V
UVCCR Reset Level 11.2 12.4 13.2 V
tFOD Fault-Out Pulse Width CFOD = 33 nF (Note 3) 1.4 1.8 2.0 ms
VIN(ON) ON Threshold Voltage Applied between IN - COM 2.8 - - V
VIN(OFF) OFF Threshold Voltage - - 0.8 V
RTH Resistance of Thermistor at TTH = 25°C (Note 4, Figure 5) - 47.0 - k
at TTH = 100°C (Note 4, Figure 5) - 2.9 - k
0 25 50 75 100 125
0
50
100
150
200 MIN
TYP
MAX
R-T Curve
Resistance RTH[k]
Temperature TTH[]℃
95 100 105 110 115 120 125
1
2
3
4 MIN
TYP
MAX
Resistance RTH[k]
Temperature TTH[]℃
©2010 Fairchild Semiconductor Corporation 7www.fairchildsemi.com
FPAB30BH60B Rev. C4
FPAB30BH60B PFC SPM® 3 Series for Single-Phase Boost PFC
Recommended Operating Condition
Mechanical Characteristics and Ratings
Figure 6. Flatness Measurement Position
Symbol Item ConditionMin.Typ.Max.Unit
ViInput Supply Voltage Applied between R - S 187 220 253 Vrms
VPN Output Voltage Applied between P - N - 380 400 V
VCC Control Supply Voltage Applied between VCC(L) - COM 13.5 15.0 16.5 V
dVCC/dt Control Supply Variation -1 - 1 V/s
fPWM PWM Input Frequency TJ 150°C - 20 - kHz
IiAllowable Input Current TC < 90°C, Vi = 220 V, VPN = 380 V
VPWM = 20 kHz --30A
peak
Item Condition Min. Typ. Max. Unit
Mounting Torque Mounting Screw: M3 Recommended 0.62 N•m 0.51 0.62 0.72 N•m
Device Flatness See Figure 6 0 - +120 m
Weight - 15.00 - g
(+)
(+)
(+)
©2010 Fairchild Semiconductor Corporation 8www.fairchildsemi.com
FPAB30BH60B Rev. C4
FPAB30BH60B PFC SPM® 3 Series for Single-Phase Boost PFC
Time Charts of Protective Function
P1 : Normal operation: IGBT ON and conducting current.
P2 : Under-voltage detection.
P3 : IGBT gate interrupt.
P4 : Fault signal generation.
P5 : Under-voltage reset.
P6 : Normal operation: IGBT ON and conducting current.
Figure 7. Under-V olta g e Prote c t io n
P1 : Normal operation: IGBT ON and conducting current.
P2 : Over current detection.
P3 : IGBT gate interrupt / fault signal generation.
P4 : IGBT is slowly turned off.
P5 : IGBT OFF signal.
P6 : IGBT ON signa: but IGBT cannot be turned on during the fault output activation.
P7 : IGBT OFF state.
P8 : Fault output reset and normal operation start.
Figure 8. Over-Current Protection
In te rn a l IGBT
Ga te -Emitte r Vo lta g e
Input S ignal
O utput C urrent
Sensing Voltage
Fault O utput S ignal
P1
P2
P3
P4
P6
P5
P7
P8
OC Re fe re nc e
Voltage (0.5V)
RC F ilt e r De la y
OC De te ctio n
©2010 Fairchild Semiconductor Corporation 9www.fairchildsemi.com
FPAB30BH60B Rev. C4
FPAB30BH60B PFC SPM® 3 Series for Single-Phase Boost PFC
Figure 9. Application Example
Notes:
5. Each capacitors should be located as close to PFC SPM® product pins as possible.
6. It’s recommended that anti-paralle l diode should be connected with IGBT.
CSC
CFOD
VFO
IN
COM
VCC
OUT
P
L
PR
NTC
Thermistor
PFC
Controller
+5 V
+15 V
+5 V
R
SVAC
NNR
IN
COM
VCC
VFO
CFOD
CSC
VTH
RTH
©2010 Fairchild Semiconductor Corporation 10 www.fairchildsemi.com
FPAB30BH60B Rev. C4
FPAB30BH60B PFC SPM® 3 Series for Single-Phase Boost PFC
Detailed Package Outline Drawings
Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner
without notice. Please note the revision and/or data on the drawing and contact a FairchildSemiconductor representative to verify or
obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide therm and conditions,
specifically the the warranty therein, which covers Fairchild products.
Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings:
http://www.fairchildsemi.com/dwg/MO/MOD27BE.pdf
©2010 Fairchild Semiconductor Corpo ration 11 www.fairchildsemi.com
FPAB30BH60B Rev. C4
FPAB30BH60B PFC SPM® 3 Series for Single-Phase Boost PFC
www.onsemi.com
1
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
© Semiconductor Components Industries, LLC