Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. Revised February 1999 MM74HC138 3-to-8 Line Decoder General Description The MM74HC138 decoder utilizes advanced silicon-gate CMOS technology and is well suited to memory address decoding or data routing applications. The circuit features high noise immunity and low power consumption usually associated with CMOS circuitry, yet has speeds comparable to low power Schottky TTL logic. The MM74HC138 has 3 binary select inputs (A, B, and C). If the device is enabled, these inputs determine which one of the eight normally HIGH outputs will go LOW. Two active LOW and one active HIGH enables (G1, G2A and G2B) are provided to ease the cascading of decoders. The decoder's outputs can drive 10 low power Schottky TTL equivalent loads, and are functionally and pin equivalent to the 74LS138. All inputs are protected from damage due to static discharge by diodes to VCC and ground. Features Typical propagation delay: 20 ns Wide power supply range: 2V-6V Low quiescent current: 80 A maximum (74HC Series) Low input current: 1 A maximum Fanout of 10 LS-TTL loads Ordering Code: Order Number MM74HC138M MM74HC138SJ MM74HC138MTC MM74HC138N Package Number Package Description M16A 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow M16D 16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide MTC16 N16E 16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide 16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Devices also available in Tape and Reel. Specify by appending suffix letter "X" to the ordering code. Connection Diagram Pin Assignment for DIP, SOIC, SOP and TSSOP (c) 1999 Fairchild Semiconductor Corporation DS005120.prf www.fairchildsemi.com MM74HC138 3-to-8 Line Decoder September 1983 MM74HC138 Truth Table Inputs Outputs Enable Select G1 G2 (Note 1) C B A Y0 Y1 Y2 Y3 Y4 Y5 Y6 Y7 X H X X X H H H H H H H H L X X X X H H H H H H H H H L L L L L H H H H H H H H L L L H H L H H H H H H H L L H L H H L H H H H H H L L H H H H H L H H H H H L H L L H H H H L H H H H L H L H H H H H H L H H H L H H L H H H H H H L H H L H H H H H H H H H H L H = HIGH Level, L = LOW Level, X = don't care Note 1: G2 = G2A+G2B Logic Diagram www.fairchildsemi.com 2 Recommended Operating Conditions - 0.5 to + 7.0V Supply Voltage (VCC ) DC Input Voltage (VIN) - 1.5 to VCC + 1.5V DC Output Voltage (VOUT) - 0.5 to VCC + 0.5V Clamp Diode Current (IIK, IOK) 20 mA DC Output Current, per pin (IOUT) 25 mA DC VCC or GND Current, per pin Storage Temperature Range (TSTG) 600 mW 500 mW (Note 5) Symbol Conditions VIH VIL VOH Parameter 0 VCC V -40 +85 C (tr, tf) VCC = 2.0V 1000 ns VCC = 4.5V 500 ns VCC = 6.0V 400 ns Note 3: Unless otherwise specified all voltages are referenced to ground. 260C DC Electrical Characteristics V DC Input or Output Voltage Note 2: Absolute Maximum Ratings are those values beyond which damage to the device may occur. Lead Temperature (TL) (Soldering 10 seconds) Units Input Rise or Fall Times - 65C to + 150C S.O. Package only 6 (VIN, VOUT) Power Dissipation (PD) (Note 4) Max 2 Operating Temperature Range (TA) 50 mA (ICC) Min Supply Voltage (VCC) Note 4: Power Dissipation temperature derating -- plastic "N" package: - 12 mW/C from 65C to 85C. VCC TA = 25C Typ TA = -40 to 85C Guaranteed Limits Units Minimum HIGH Level 2.0V 1.5 1.5 V Input Voltage 4.5V 3.15 3.15 V 6.0V 4.2 4.2 V Maximum LOW Level 2.0V 0.5 0.5 V Input Voltage 4.5V 1.35 1.35 V 6.0V 1.8 1.8 V Minimum HIGH Level VIN = VIH or VIL Output Voltage | IOUT | 20 A 2.0V 2.0 1.9 1.9 V 4.5V 4.5 4.4 4.4 V 6.0V 6.0 5.9 5.9 V VIN = VIH or VIL VOL |IOUT | 4.0 mA 4.5V 4.2 3.98 3.84 V | IOUT | 5.2 mA 6.0V 5.7 5.48 5.34 V Maximum LOW Level VIN = VIH or VIL Output Voltage | IOUT | 20 A 2.0V 0 0.1 0.1 V 4.5V 0 0.1 0.1 V 6.0V 0 0.1 0.1 V | IOUT | 4.0 mA 4.5V 0.2 0.26 0.33 V | IOUT | 5.2 mA 6.0V 0.2 0.26 0.33 V VIN = VCC or GND 6.0V 0.1 1.0 A Maximum Quiescent VIN = VCC or GND 6.0V 8.0 80 A Supply Current IOUT = 0 A VIN = VIH or VIL IIN Maximum Input Current ICC Note 5: For a power supply of 5V 10% the worst case output voltages (VOH, and VOL) occur for HC at 4.5V. Thus the 4.5V values should be used when designing with this supply. Worst case VIH and VIL occur at VCC = 5.5V and 4.5V respectively. (The VIH value at 5.5V is 3.85V.) The worst case leakage current (IIN, ICC, and IOZ) occur for CMOS at the higher voltage and so the 6.0V values should be used. 3 www.fairchildsemi.com MM74HC138 Absolute Maximum Ratings(Note 2) (Note 3) MM74HC138 AC Electrical Characteristics VCC = 5V, TA = 25C, CL = 15 pF, tr = tf = 6 ns Symbol tPLH Parameter Conditions Guaranteed Typ Maximum Propagation Limit Units 18 25 ns 28 35 ns 18 25 ns 23 30 ns 18 25 ns Delay, Binary Select to any Output tPHL Maximum Propagation Delay, Binary Select to any Output tPHL, tPLH Maximum Propagation Delay, G1 to any Output tPHL Maximum Propagation Delay G2A or G2B to Output tPLH Maximum Propagation Delay G2A or G2B to Output AC Electrical Characteristics CL = 50 pF, tr = tf = 6 ns (unless otherwise specified) Symbol tPLH tPHL tPHL, tPLH tPHL tPLH tTLH, tTHL CIN Parameter VCC Conditions TA= 25C Typ TA= -40 to 85C Units Guaranteed Limits Maximum Propagation 2.0V 75 150 189 ns Delay Binary Select to 4.5V 15 30 38 ns any Output LOW-to-HIGH 6.0V 13 26 32 ns Maximum Propagation 2.0V 100 200 252 ns Delay Binary Select to any 4.5V 20 40 50 ns Output HIGH-to-LOW 6.0V 17 34 43 ns Maximum Propagation 2.0V 75 150 189 ns Delay G1 to any 4.5V 15 30 38 ns Output 6.0V 13 26 32 ns Maximum Propagation 2.0V 82 175 221 ns Delay G2A or G2B to 4.5V 28 35 44 ns Output 6.0V 22 30 37 ns Maximum Propagation 2.0V 75 150 189 ns Delay G2A or G2B to 4.5V 15 30 38 ns Output 6.0V 13 26 32 ns Output Rise and 2.0V 30 75 95 ns Fall Time 4.5V 8 15 19 ns 6.0V 7 13 16 ns 3 10 10 pF Maximum Input Capacitance CPD Power Dissipation (Note 6) 75 Capacitance Note 6: CPD determines the no load dynamic power consumption, PD = CPD VCC2f + ICC VCC, and the no load dynamic current consumption, IS = CPD VCC f + I CC. www.fairchildsemi.com 4 pF MM74HC138 Physical Dimensions inches (millimeters) unless otherwise noted 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow Package Number M16A 16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package Number M16D 5 www.fairchildsemi.com MM74HC138 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Package Number MTC16 www.fairchildsemi.com 6 16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Package Number N16E LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support 1. Life support devices or systems are devices or systems device or system whose failure to perform can be reawhich, (a) are intended for surgical implant into the sonably expected to cause the failure of the life support body, or (b) support or sustain life, and (c) whose failure device or system, or to affect its safety or effectiveness. to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the www.fairchildsemi.com user. Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. MM74HC138 3-to-8 Line Decoder Physical Dimensions inches (millimeters) unless otherwise noted (Continued) ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com (c) Semiconductor Components Industries, LLC N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 www.onsemi.com 1 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative www.onsemi.com