OCTOBER 2016
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
TISP4011H1BJ VLV Overvoltage Protector Series
TISP4011H1BJ
VERY LOW VOLTAGE
BIDIRECTIONAL THYRISTOR OVERVOLTAGE PROTECTORS
The protector consists of a symmetrical voltage-triggered bidirection-
al thyristor. Overvoltages are initially clipped by breakdown clamping
until the voltage rises to the breakover level, which causes the device
to crowbar into a low-voltage on-state condition. This low-voltage
on-state causes the current resulting from the overvoltage to be
safely diverted through the device. The device switches off when the
diverted current falls below the holding current value.
12
T(A)
R(B)
MDXXBGE
T
R
SD4XAA
T
erminals T and R correspond to the
alternative line designators of A and B
*RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.
*RoHS COMPLIANT
LEAD FREE
*RoHS COMPLIANT
VERSIONS
AVAILABLE
LEAD FREE
VERSIONS ARE
RoHS COMPLIANT*
SMB Package (Top View)
Device Symbol
General Information
Absolute Maximum Ratings, TA = 25 °C (Unless Otherwise Noted)
Rating Symbol Value Unit
Repetitive peak off-state voltage VDRM ±5.25 V
Non-repetitive peak on-state pulse current
10/1000 µs
2/10 µs
IPPSM
±100
±500
A
Junction temperature TJ-40 to +150 °C
Storage temperature Tstg -55 to +150 °C
Electrical Characteristics, TA = 25 °C (Unless Otherwise Noted)
Parameter Test Conditions Min. Typ. Max. Unit
Leakage current VD = VDRM 1 200 µA
Breakover voltage di/dt = ±1 mA/µs 9 10.5 V
Breakover current di/dt = ±1 mA/µs 75 200 mA
On-state voltage IT = ±5 A 3 V
Holding current IT = ±5 A, di/dt = ±1 mA/µs 20 60 mA
Off-state capacitance Vd = 0 V, f = 1 MHz, 1 Vrms 110 pF
ID
VT
V(BO)
I(BO)
IH
Coff
OCTOBER 2016
Specifications are subject to change without notice.
The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.
Users should verify actual device performance in their specific applications.
TISP4011H1BJ VLV Overvoltage Protector Series
Figure 1. Voltage-Current Characteristic for T and R Terminals
All Measurements are Referenced to the R Terminal
Parameter Measurement Information
How to Order
Device Package Carrier Order as
TISP4011H1BJ BJ (SMB/DO-214AA J-Bend) R (Embossed Tape Reeled) TISP4011H1BJR-S
For production quantities, the carrier will be embossed tape reel pack. Evaluation quantities may be shipped in bulk pack or embossed tape.
Carrier Information
Package Carrier Standard Quantity
SMB Embossed Tape Reel Pack 3000
Asia-Pacic: Tel: +886-2 2562-4117 • Email: asiacus@bourns.com
EMEA: Tel: +36 88 520 390 • Email: eurocus@bourns.com
The Americas: Tel: +1-951 781-5500 • Email: americus@bourns.com
www.bourns.com
