E6300A - CHERRY ELECTRICAL PRODUCTS

SUBMINIATURE

ESeries

Stainless steel spring

Thermoplastic

actuating button

Thermoplastic

case

Silver contacts or

gold crosspoint

contacts

Common terminal

NC terminal

NO terminal

Copper alloy blade

Features

●4 current ratings

●Choice of actuator

●5 terminal types

●3 contact arrangements

●Long life coil spring mechanism

●DC ratings available upon request

●High-temperature version available

Subminiature modules take less space

than individual subminiature switches

fastened side-by-side. For applications

requiring 2, 3, 4 or 5-circuit control in a

compact space, the special molded case

design helps speed assembly since there

is only one part to handle and install rather

than 2, 3, 4 or 5 individual switches.

Specifications

Electrical

Temperature Rating: -40°to +85°C, +130°optional using thermoset material

Flammability Rating: UL94HB

Materials

Case: Thermoplastic

Actuating Button: Thermoplastic Acetal

Terminals: Silver-Plated Commercial Bronze

Moving Blade: Beryllium Copper

Spring: Stainless Steel

Auxiliary Actuator: Cold Rolled Steel (Nickel-Plated)

Contacts: Fine Silver (except E63 — Gold Crosspoint)

Electrical Ratings

Electrical Life at Rated Load

Switch According to VDE According to UL

Series EN61058 Rating UL1054 Rating (Min. Operations) (Min. Operations)

E61 N/A 5A, 125/250VAC N/A 6,000*

5A, 30VDC (optional)

E62 N/A 10.1A, 125/250VAC; 1/4HP, 125VAC N/A 6,000

E63 N/A 0.1A, 125VAC N/A 6,000

0.25A, 30VDC (optional)

E64 N/A 13A, 125VAC; 10.1A, 250VAC N/A 6,000

*Indicates 100K life available.

0.781

(19.84)

0.250

(6.35)

0.093

(2.36)

0.093

(2.36)

0.300

(7.62)

0.375

(9.53)0.352

(8.94)

0.093

(2.36)

0.087 (2.21)

0.095 (2.41)

0.405

(10.29)

0.073

(1.85) 0.237

(6.02)

Reference

Line

0.087 (2.21)

0.095 (2.41) Dia. Hole

0.094 (2.39)

0.109 (2.77)

0.375

(9.53 0.005

0.13)

COM N.O. N.C.

Nominal

Operate

Position

0.143 (3.63)

0.093 (2.36)

0.110 (2.79) 0.073 (1.85)

0.032 (0.81)

0.051 (1.30)

0.177

(4.50)

0.160

(4.06) 0.191

(4.85)

0.344

(8.74)

0.250

(6.35) 0.125

(3.18)

0.058

(1.47)

0.050

(1.27)

Short SolderQC

QC Barrel

PCB

–10A

–00A

–30A –40A

–50A

I.D. with

Clinch Opening

Terminals

Dimensions inches (mm)

0.483

(12.268)

Reference

Line

Actuation

Length

0.133 (3.378) Standard Actuator Width

0.125

(3.175)

0.066

(1.676)

of Actuating Button

Standard Ratio

High Ratio

Actuators

Many special forms and lengths of actuators

are available. Standard type integral hinged

lever and roller actuators are available in

choice of 2 pivot positions. Actuation lengths

are dimensioned from centerline of switch

mounting hole as shown.

Ordering Information

Select the current rating you need. Combine

the corresponding Series/Prefix number

with the appropriate suffix number for the

switch type, circuitry and terminals you

require. See additional note under terminals.

Example: To order the E61-50R with 0.110″

(2.79mm) QC terminals, order an E61-80R.

Note: 0.093″(2.36mm) Quick Connect

terminals are standard. To order solder

terminals add 10 to suffix. To order 0.110″

(2.79mm) QC terminals add 30 to suffix.

For PCB terminals consult factory.

Example: The basic E61-00A becomes

E61-30A for 0.110″(2.79mm) QC terminals.

For PCB terminals consult factory for

part numbers.

Actuator Specifications

Maximum Maximum Operating Minimum Max. Movement Actuation

Operating Force (gms.) Pre-Travel Point* Over-Travel Differential Length**

Actuator Switch inches inches inches inches inches

Type Type E61 E62 E63 E64 (mm) (mm) (mm) (mm) (mm)

–00A 90 212 90 335 0.030 0.330±0.015 0.040 0.004 —

(0.76) (8.38±0.38) (1.06) (0.10) —

–00R 30 65 30 110 0.130 0.574±0.054 0.030 0.020 0.196

(3.30) (14.58±1.37) (0.76) (0.51) (4.98)

–50R 10 22 10 40 0.379 0.570±0.156 0.050 0.050 0.322

(9.63) (14.48±3.96) (1.27) (1.27) (8.18)

–00H 27 56 27 100 0.144 0.350±0.030 0.040 0.020 0.271

(3.66) (8.89±0.76) (1.02) (0.51) (6.88)

–50H 9 20 9 35 0.416 0.350±0.175 0.050 0.050 0.396

(10.57) (8.89±4.45) (1.27) (1.27) (10.06)

–00K 30 65 30 110 0.131 0.570±0.030 0.030 0.020 0.203

(3.33) (14.48±0.76) (0.76) (0.51) (5.16)

–50K 10 33 10 40 0.379 0.570±0.158 0.040 0.050 0.326

(9.63) (14.48±4.01) (1.02) (1.27) (8.28)

*Measured above reference line. Refer to dimensional drawing above. **Actuator tolerance of ±0.031 inches (0.79mm).

Specifications subject to change without notice.

PCB Footprint

0.405

(10.29)

0.197 (5.00) — PCB Terminals Lateral to Case or Cover

NCNOC

0.063 (1.60) Ø (3)

0.237 (6.02) — PCB Terminals Straight Down Only

Circuitry

Contact arrangement available in choice of

single pole double throw or single pole single

throw, either normally open or normally

closed. In general, normally open may be

specified by changing suffix number from

00 to 01 and normally closed by changing

suffix number to 02.

Example: E61-01A is normally open, and

E61-02A is normally closed.

Mounting

Recommended mounting screw: #2-56

round head. Recommended torque on

screw: 2 inch lbs. max.

Terminals

Subminiature series is available with quick

connect. 0.093″(2.36mm) wide (mates

with AMP Part No. 60432-1) and 0.110″

(2.794mm) wide (mates with AMP Part

No. 42068-1). Also available in short solder

terminal 0.143″(3.63mm) wide x 0.125″

(3.18mm) long, and PCB terminal 0.051″

(1.30mm) wide x 0.191″(4.85mm) long.

Terminal SPDT SPST NO SPST NC

0.093″QC E61-00A E61-01A E61-02A

Short Solder†E61-10A E61-11A E61-12A

0.110″QC E61-30A E61-31A E61-32A

Barrel†E61-40A E61-41A E61-42A

PCB†E61-50A E61-51A E61-52A

†Not available on E64 Series.

0.093

(2.36)

0.250

(6.35)

Dimension

0.781

(19.84)

0.200

(5.08)

0.237

(6.02)

0.405

(10.29)

0.103

(2.62)

0.020

(0.51)

(3 places)

0.094 (2.39)

0.109 (2.77)

0.483

(12.27)

0.093

(2.36)

0.087 (2.21)

0.095 (2.41) Reference

Line

0.087 (2.21) Dia

0.095 (2.41) Hole

0.375

(9.53 0.005

0.13)

COM N.O. N.C.

0.143 (3.63)0.093 (2.36) 0.110 (2.80) 0.051 (1.30)

–10A*–00A –30A –50A*

0.160

(4.06) 0.191

(4.85)

0.344

(8.74)

0.250

(6.35) 0.125

(3.18)

0.058

(1.47) 0.050

(1.27)

Short

Solder

QC QC PCB

2 PDT 0.470±0.020 (11.934±0.51)

3 PDT 0.672±0.020 (17.07±0.51)

4 PDT 0.875±0.020 (22.23±0.51)

5 PDT 1.086±0.020 (27.58±0.51)

A Dimension

Terminals

*Not available on E64 Series

Part Number Suffix

Switch Type Terminal 2PDT 3PDT 4PDT 5PDT

0.093″(2.362mm) QC –02HM –03HM –04HM –05HM

Solder –12HM –13HM –14HM –15HM

0.110″(2.794mm) QC –32HM –33HM –34HM –35HM

Standard Ratio PCB Consult Factory

0.093″(2.362mm) QC –52HM –53HM –54HM –55HM

Solder –62HM –63HM –64HM –65HM

0.110″(2.794mm) QC –82HM –83HM –84HM –85HM

High Ratio PCB Consult Factory

Dimensions — Modules inches (mm)

Specifications subject to change without notice.

Ordering Information — Modules

Select the current rating you need. Combine the corresponding Series/Prefix number with

the appropriate suffix number for the switch type and terminals you require.

*For additional actuator styles consult factory.

0.483

(12.268)

Reference

Line

Actuation

Length

0.133 (3.378) Standard Actuator Width

0.125

(3.175)

0.066

(1.676)

of Actuating Button

Standard Ratio

High Ratio

Actuators — Modules

Many special forms and lengths of actuators

are available. Standard type integral hinged

lever and roller actuators are available in

choice of 2 pivot positions. Actuation lengths

are dimensioned from centerline of switch

mounting hole as shown.

PCB Footprint — Modules

0.405

(10.29)

0.197 (5.00) — PCB Terminals Lateral to Case or Cover

NCNOC

0.063 (1.60) Ø (3)

0.237 (6.02) — PCB Terminals Straight Down Only

Terminals — Modules

Subminiature modules are available with quick connect. 0.093″(2.362mm) wide (mates with

AMP Part No. 60432-1) and 0.110″(2.794mm) wide (mates with AMP Part No. 42068-1).

Also available in short solder terminal 0.143″(3.632mm) wide x 0.125″(3.175mm) long, and

PCB terminal 0.051″(1.295mm) wide x 0.191″(4.851mm) long.