SUBMINIATURE E Series Features 4 current ratings Choice of actuator 5 terminal types 3 contact arrangements Long life coil spring mechanism DC ratings available upon request High-temperature version available Thermoplastic actuating button Copper alloy blade Stainless steel spring Silver contacts or gold crosspoint contacts Subminiature modules take less space than individual subminiature switches fastened side-by-side. For applications requiring 2, 3, 4 or 5-circuit control in a compact space, the special molded case design helps speed assembly since there is only one part to handle and install rather than 2, 3, 4 or 5 individual switches. Thermoplastic case NC terminal Common terminal NO terminal Electrical Ratings Switch Series EN61058 Rating E61 N/A E62 E63 N/A N/A E64 N/A Electrical Life at Rated Load According to VDE According to UL (Min. Operations) (Min. Operations) UL1054 Rating 5A, 125/250VAC 5A, 30VDC (optional) 10.1A, 125/250VAC; 1/4HP, 125VAC 0.1A, 125VAC 0.25A, 30VDC (optional) 13A, 125VAC; 10.1A, 250VAC N/A 6,000* N/A N/A 6,000 6,000 N/A 6,000 *Indicates 100K life available. Specifications Electrical Temperature Rating: Flammability Rating: -40 to +85C, +130 optional using thermoset material UL94HB Materials Case: Actuating Button: Terminals: Moving Blade: Spring: Auxiliary Actuator: Contacts: 18 Thermoplastic Thermoplastic Acetal Silver-Plated Commercial Bronze Beryllium Copper Stainless Steel Cold Rolled Steel (Nickel-Plated) Fine Silver (except E63 -- Gold Crosspoint) (R) Dimensions inches (mm) 0.093 (2.36) PCB Footprint Terminals 0.781 (19.84) QC 0.250 (6.35) 0.250 (6.35) NC 0.197 (5.00) -- PCB Terminals Lateral to Case or Cover 0.237 (6.02) -- PCB Terminals Straight Down Only 0.125 (3.18) Nominal Operate Position 0.087 (2.21) 0.095 (2.41) COM N.O. Reference Line N.C. 0.087 (2.21) Dia. Hole 0.095 (2.41) 0.375 + - 0.005 (9.53 + - 0.13) 0.093 (2.36) 0.094 (2.39) 0.109 (2.77) 0.073 (1.85) 0.143 (3.63) 0.093 (2.36) 0.300 (7.62) 0.352 (8.94) NO 0.405 (10.29) 0.058 (1.47) 0.093 (2.36) 0.375 (9.53) C 0.063 (1.60) O (3) Short Solder 0.405 (10.29) Actuators -00A -10A QC Barrel 0.177 (4.50) 0.344 (8.74) 0.050 (1.27) 0.110 (2.79) 0.073 (1.85) I.D. with 0.032 (0.81) Clinch Opening -30A -40A Many special forms and lengths of actuators are available. Standard type integral hinged lever and roller actuators are available in choice of 2 pivot positions. Actuation lengths are dimensioned from centerline of switch mounting hole as shown. PCB 0.133 (3.378) Standard Actuator Width 0.160 (4.06) 0.191 (4.85) 0.051 (1.30) 0.237 (6.02) CL of Actuating Button -50A 0.483 (12.268) 0.066 (1.676) 0.125 (3.175) Actuation Length Actuator Specifications Maximum Operating Force (gms.) Actuator Switch Type Type E61 E62 E63 E64 -00A 90 212 90 335 -00R 30 65 30 110 -50R 10 22 10 40 -00H 27 56 27 100 -50H 9 20 9 35 -00K 30 65 30 110 -50K 10 33 10 40 Maximum Pre-Travel inches (mm) 0.030 (0.76) 0.130 (3.30) 0.379 (9.63) 0.144 (3.66) 0.416 (10.57) 0.131 (3.33) 0.379 (9.63) Operating Point* inches (mm) 0.3300.015 (8.380.38) 0.5740.054 (14.581.37) 0.5700.156 (14.483.96) 0.3500.030 (8.890.76) 0.3500.175 (8.894.45) 0.5700.030 (14.480.76) 0.5700.158 (14.484.01) Minimum Max. Movement Actuation Over-Travel Differential Length** inches inches inches (mm) (mm) (mm) 0.040 (1.06) 0.030 (0.76) 0.050 (1.27) 0.040 (1.02) 0.050 (1.27) 0.030 (0.76) 0.040 (1.02) 0.004 (0.10) 0.020 (0.51) 0.050 (1.27) 0.020 (0.51) 0.050 (1.27) 0.020 (0.51) 0.050 (1.27) -- -- 0.196 (4.98) 0.322 (8.18) 0.271 (6.88) 0.396 (10.06) 0.203 (5.16) 0.326 (8.28) *Measured above reference line. Refer to dimensional drawing above. **Actuator tolerance of 0.031 inches (0.79mm). Circuitry Ordering Information Contact arrangement available in choice of single pole double throw or single pole single throw, either normally open or normally closed. In general, normally open may be specified by changing suffix number from 00 to 01 and normally closed by changing suffix number to 02. Select the current rating you need. Combine the corresponding Series/Prefix number with the appropriate suffix number for the switch type, circuitry and terminals you require. See additional note under terminals. Example: E61-01A is normally open, and E61-02A is normally closed. Note: 0.093 (2.36mm) Quick Connect terminals are standard. To order solder terminals add 10 to suffix. To order 0.110 (2.79mm) QC terminals add 30 to suffix. For PCB terminals consult factory. Mounting Recommended mounting screw: #2-56 round head. Recommended torque on screw: 2 inch lbs. max. Specifications subject to change without notice. Reference Line High Ratio Standard Ratio Terminals Subminiature series is available with quick connect. 0.093 (2.36mm) wide (mates with AMP Part No. 60432-1) and 0.110 (2.794mm) wide (mates with AMP Part No. 42068-1). Also available in short solder terminal 0.143 (3.63mm) wide x 0.125 (3.18mm) long, and PCB terminal 0.051 (1.30mm) wide x 0.191 (4.85mm) long. Terminal SPDT SPST NO SPST NC 0.093 QC Short Solder 0.110 QC Barrel PCB E61-00A E61-10A E61-30A E61-40A E61-50A E61-01A E61-11A E61-31A E61-41A E61-51A E61-02A E61-12A E61-32A E61-42A E61-52A Example: To order the E61-50R with 0.110 (2.79mm) QC terminals, order an E61-80R. Not available on E64 Series. Example: The basic E61-00A becomes E61-30A for 0.110 (2.79mm) QC terminals. For PCB terminals consult factory for part numbers. 19 Dimensions -- Modules PCB Footprint -- Modules inches (mm) Dimension A C 0.087 (2.21) 0.095 (2.41) 0.483 (12.27) N.O. COM 0.093 (2.36) 0.020 (0.51) (3 places) 0.063 (1.60) O (3) Reference Line NC 0.197 (5.00) -- PCB Terminals Lateral to Case or Cover 0.237 (6.02) -- PCB Terminals Straight Down Only N.C. 0.094 (2.39) 0.109 (2.77) 0.103 (2.62) 0.405 (10.29) 0.375 + - 0.005 (9.53 + - 0.13) 0.781 (19.84) 0.087 (2.21) Dia 0.095 (2.41) Hole 0.250 (6.35) Many special forms and lengths of actuators are available. Standard type integral hinged lever and roller actuators are available in choice of 2 pivot positions. Actuation lengths are dimensioned from centerline of switch mounting hole as shown. 0.093 (2.36) Terminals 0.250 (6.35) QC Short Solder 0.125 (3.18) A Dimension 0.4700.020 (11.9340.51) 0.6720.020 (17.070.51) 0.8750.020 (22.230.51) 1.0860.020 (27.580.51) Actuators -- Modules 0.237 (6.02) 0.200 (5.08) QC 2 PDT 3 PDT 4 PDT 5 PDT NO 0.405 (10.29) 0.050 (1.27) 0.058 (1.47) PCB 0.344 (8.74) 0.093 (2.36) 0.143 (3.63) 0.110 (2.80) -00A -10A* -30A 0.160 (4.06) 0.191 (4.85) 0.051 (1.30) -50A* 0.133 (3.378) Standard Actuator Width *Not available on E64 Series CL of Actuating Button 0.483 (12.268) Terminals -- Modules Subminiature modules are available with quick connect. 0.093 (2.362mm) wide (mates with AMP Part No. 60432-1) and 0.110 (2.794mm) wide (mates with AMP Part No. 42068-1). Also available in short solder terminal 0.143 (3.632mm) wide x 0.125 (3.175mm) long, and PCB terminal 0.051 (1.295mm) wide x 0.191 (4.851mm) long. High Ratio Standard Ratio Ordering Information -- Modules Select the current rating you need. Combine the corresponding Series/Prefix number with the appropriate suffix number for the switch type and terminals you require. *For additional actuator styles consult factory. Switch Type Standard Ratio High Ratio 20 Terminal 0.093 (2.362mm) QC Solder 0.110 (2.794mm) QC PCB 0.093 (2.362mm) QC Solder 0.110 (2.794mm) QC PCB Specifications subject to change without notice. 2PDT -02HM -12HM -32HM -52HM -62HM -82HM Part Number Suffix 3PDT 4PDT -03HM -04HM -13HM -14HM -33HM -34HM Consult Factory -53HM -54HM -63HM -64HM -83HM -84HM Consult Factory 5PDT -05HM -15HM -35HM -55HM -65HM -85HM 0.066 (1.676) 0.125 (3.175) Actuation Length Reference Line