AM2520EF/4ID5V - Kingbright

SPEC NO: DSAD1637 REV NO: V.9 DATE: MAR/07/2008 PAGE: 1 OF 4

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1102005300

SUBMINIATURE SOLID STATE LAMP

Part Number: AM2520EF/4ID5V

High Efficiency Red

Features

z BLACK CASE ENHANCES CONTRAST.

z VIBRATION AND SHOCK RESISTANT.

z AVAILABLE WITH A VARITY OF LEDs.

z UL RATING : 94V- 

0.

z HOUSING MATERIAL: TYPE 66 NYLON.

z 5V INTERNAL RESISTOR.

z RoHS COMPLIANT.

Description

The High Efficiency Red source color devices are made with

Gallium Arsenide Phosphide on Gallium Phosphide Orange

Light Emitting Diode.

Package Dimensions

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.25(0.01") unless otherwise noted.

3. Lead spacing is measured where the leads emerge from the package.

4. Specifications are subject to change without notice.

SPEC NO: DSAD1637 REV NO: V.9 DATE: MAR/07/2008 PAGE: 2 OF 4

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1102005300

Selection Guide

Notes:

1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.

2. Luminous intensity/ luminous Flux: +/-15%.

Absolute Maximum Ratings at TA=25°C

Electrical / Optical Characteristics at TA=25°C

Note:

1.Wavelength: +/-1nm.

Notes:

1. 2mm below package base.

2. 5mm below package base.

Part No. Dice Lens Type

V

iewing

Angle [1]

Min. Typ. 2θ1/2

AM2520EF/4ID5V High Efficiency Red (GaAsP/GaP) RED DIFFUSED 1.8 8 40°

Iv (mcd) [2]

V= 5V

Symbol Parameter Device Typ. Max. Units Test Conditions

λpeak Peak Wavelength High Efficiency Red 627 nm VF=5V

λD [1] Dominant Wavelength High Efficiency Red 625 nm VF=5V

Δλ1/2 Spectral Line Half-width High Efficiency Red 45 nm VF=5V

IF Forward Current High Efficiency Red 13 17.5 mA VF=5V

IR Reverse Current High Efficiency Red 10 uA VR = 5V

Parameter High Efficiency Red Units

Power dissipation 85 mW

Forward Voltage 6 V

Reverse Voltage 5 V

Operating Temperature -40°C To +70°C

Storage Temperature -40°C To +85°C

Lead Solder Temperature [1] 260°C For 3 Seconds

Lead Solder Temperature [2] 260°C For 5 Seconds

SPEC NO: DSAD1637 REV NO: V.9 DATE: MAR/07/2008 PAGE: 3 OF 4

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1102005300

High Efficiency Red AM2520EF/4ID5V

SPEC NO: DSAD1637 REV NO: V.9 DATE: MAR/07/2008 PAGE: 4 OF 4

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1102005300

PACKING & LABEL SPECIFICATIONS AM2520EF/4ID5V